NanoC6

SKU:C125

Description

NanoC6 is a compact, low-power IoT development board in the M5Stack development kit series. It features the ESP32-C6FH4 as its SoC, supporting advanced wireless communication methods such as Wi-Fi 6 and ZigBee, and includes a built-in infrared emitter for convenient control of infrared IoT devices. The onboard ceramic antenna ensures stable wireless communication.

Additionally, the device is equipped with programmable RGB LEDs, allowing for personalized visual effects in projects. The inclusion of a Grove interface enables flexible expansion with various M5 devices (customizable to connect different types of devices, such as those following UART/I2C communication protocols), providing developers with rich hardware expansion possibilities.

This development board is suitable for smart homes, industrial automation, health monitoring, and IoT devices, offering a comprehensive development solution for innovative projects.

Note

WiFi 6

M5NanoC6 is the first core control board to support WiFi 6, supporting the 2.4 GHz Wi-Fi 6 protocol (802.11ax) and backward compatibility with 802.11 b/g/n.
WiFi 6 offers higher speeds, greater capacity, lower latency, and enhanced security compared to previous WiFi protocols.

Tutorial

Arduino IDE

This tutorial will guide you on how to program and control the M5NanoC6 device using the Arduino IDE

Features

Supports (2.4GHz) Wi-Fi 6, Zigbee, and Thread, Matter wireless protocols
Built-in infrared LED and RGB
Equipped with Grove interface
Ceramic antenna
Compact size
Development Platform
- UiFlow2
- Arduino IDE
- ESP-IDF
- Platform.IO

Includes

1 x NanoC6

Applications

Smart home systems
Industrial control systems
Environmental monitoring systems
Agricultural IoT systems
Healthcare
Consumer electronics
Service robots

Specifications

Specification	Parameter
SoC	ESP32-C6FH4@RISC-V 160MHz, 4M Flash, Wi-Fi 6, Zigbee 3.0, Thread 1.3, Matter, CDC
WIFI Protocol	2.4 GHz Wi-Fi 6 protocol (802.11ax), backward compatible with 802.11 b/g/n
RGB	WS2812
IR Remote Parameters	∠0° infrared emission distance 632CM ∠45° infrared emission distance 83CM ∠90° infrared emission distance 29CM
Grove Output Maximum Current	DC 5V@600mA (output capability depends on USB power supply)
Standby Current (Deep Sleep Mode)	Type-C power supply DC [email protected] Grove power supply DC 5V@50uA
Standby Current (ULP Mode)	Type-C power supply DC 5V@252uA Grove power supply DC [email protected]
Operating Current	WIFI mode: DC [email protected]
WI-FI Range Test (antenna facing up, back-to-back test)	54.9 meters
Operating Temperature	0 ~ 40°C
Product Dimensions	23.5 x 12.0 x 9.5mm
Product Weight	2.7g
Package Dimensions	100.6 x 80.0 x 10.5mm
Gross Weight	11.4g

Learn

Download Mode

How to Enter Download Mode

To enter download mode for programming, hold down the GPIO9 button and then connect the data cable.

Schematics

NanoC6 Schematics PDF

1/1

PinMap

RGB LED Usage Note:

When using the RGB LED, remember to turn on the power switch for the RGB, i.e., set the GPIO19 pin to high level.

Model Size