Molybdenum dioxide: Difference between revisions
English |
m Replace magic links with templates per local RfC - BRFA |
||
Line 57: | Line 57: | ||
}} |
}} |
||
'''Molybdenum dioxide''' is the [[chemical compound]] with the [[chemical formula|formula]] MoO<sub>2</sub>. It is a violet-colored solid and is a metallic conductor. It crystallizes in a [[monoclinic]] cell, and has a distorted rutile, ([[titanium dioxide|TiO<sub>2</sub>]]) crystal structure. In TiO<sub>2</sub> the [[oxide]] anions are [[close-packing|close packed]] and titanium atoms occupy half of the octahedral interstices (holes). In MoO<sub>2</sub> the octahedra are distorted, the Mo atoms are off-centre, leading to alternating short and long Mo – Mo distances and Mo-Mo bonding. The short Mo – Mo distance is 251 [[picometer|pm]] which is less than the Mo – Mo distance in the metal, 272.5 pm. The bond length is shorter than would be expected for a single bond. The bonding is complex and involves a delocalisation of some of the Mo electrons in a conductance band accounting for the metallic conductivity.<ref>''Oxides: Solid state chemistry'' McCarroll W.H. Encyclopedia of Inorganic Chemistry Ed R. Bruce King, (1994), John Wiley & sons ISBN |
'''Molybdenum dioxide''' is the [[chemical compound]] with the [[chemical formula|formula]] MoO<sub>2</sub>. It is a violet-colored solid and is a metallic conductor. It crystallizes in a [[monoclinic]] cell, and has a distorted rutile, ([[titanium dioxide|TiO<sub>2</sub>]]) crystal structure. In TiO<sub>2</sub> the [[oxide]] anions are [[close-packing|close packed]] and titanium atoms occupy half of the octahedral interstices (holes). In MoO<sub>2</sub> the octahedra are distorted, the Mo atoms are off-centre, leading to alternating short and long Mo – Mo distances and Mo-Mo bonding. The short Mo – Mo distance is 251 [[picometer|pm]] which is less than the Mo – Mo distance in the metal, 272.5 pm. The bond length is shorter than would be expected for a single bond. The bonding is complex and involves a delocalisation of some of the Mo electrons in a conductance band accounting for the metallic conductivity.<ref>''Oxides: Solid state chemistry'' McCarroll W.H. Encyclopedia of Inorganic Chemistry Ed R. Bruce King, (1994), John Wiley & sons {{ISBN|0-471-93620-0}}</ref><br /> |
||
MoO<sub>2</sub> can be prepared : |
MoO<sub>2</sub> can be prepared : |
||
*by reduction of [[molybdenum(VI) oxide|MoO<sub>3</sub>]] with Mo over the course of 70 hours at 800 °C. The [[tungsten]] analogue, WO<sub>2</sub>, is prepared similarly. |
*by reduction of [[molybdenum(VI) oxide|MoO<sub>3</sub>]] with Mo over the course of 70 hours at 800 °C. The [[tungsten]] analogue, WO<sub>2</sub>, is prepared similarly. |
||
Line 63: | Line 63: | ||
*by reducing MoO<sub>3</sub> with [[hydrogen|H<sub>2</sub>]] or [[ammonia|NH<sub>3</sub>]] below 470 °C <ref>{{Cotton&Wilkinson6th}}</ref> |
*by reducing MoO<sub>3</sub> with [[hydrogen|H<sub>2</sub>]] or [[ammonia|NH<sub>3</sub>]] below 470 °C <ref>{{Cotton&Wilkinson6th}}</ref> |
||
Single crystals are obtained by [[Chemical transport reaction|chemical transport]] using [[iodine]]. Iodine reversibly converts MoO<sub>2</sub> into the volatile species MoO<sub>2</sub>I<sub>2</sub>.<ref>Conroy, L. E.; Ben-Dor, L. "Molybdenum(IV) Oxide and Tungsten(IV) Oxides Single-Crystals" Inorganic Syntheses 1995, volume 30, pp. 105–107. ISBN |
Single crystals are obtained by [[Chemical transport reaction|chemical transport]] using [[iodine]]. Iodine reversibly converts MoO<sub>2</sub> into the volatile species MoO<sub>2</sub>I<sub>2</sub>.<ref>Conroy, L. E.; Ben-Dor, L. "Molybdenum(IV) Oxide and Tungsten(IV) Oxides Single-Crystals" Inorganic Syntheses 1995, volume 30, pp. 105–107. {{ISBN|0-471-30508-1}}</ref> |
||
Molybdenum oxide is a constituent of "technical molybdenum oxide" produced during the industrial processing of [[molybdenum(IV) sulfide|MoS<sub>2</sub>]]:<ref>''Metallurgical furnaces'' Jorg Grzella, Peter Sturm, Joachim Kruger, Markus A. Reuter, Carina Kogler, Thomas Probst, Ullmans Encyclopedia of Industrial Chemistry</ref><ref>"Thermal Analysis and Kinetics of Oxidation of Molybdenum Sulfides" Y. Shigegaki, S.K. Basu, M.Wakihara and M. Taniguchi, J. Therm. Analysis 34 (1988), 1427-1440</ref> |
Molybdenum oxide is a constituent of "technical molybdenum oxide" produced during the industrial processing of [[molybdenum(IV) sulfide|MoS<sub>2</sub>]]:<ref>''Metallurgical furnaces'' Jorg Grzella, Peter Sturm, Joachim Kruger, Markus A. Reuter, Carina Kogler, Thomas Probst, Ullmans Encyclopedia of Industrial Chemistry</ref><ref>"Thermal Analysis and Kinetics of Oxidation of Molybdenum Sulfides" Y. Shigegaki, S.K. Basu, M.Wakihara and M. Taniguchi, J. Therm. Analysis 34 (1988), 1427-1440</ref> |
Revision as of 15:02, 24 June 2017
Names | |
---|---|
IUPAC name
Molybdenum(IV) oxide
| |
Other names
Molybdenum dioxide
Tugarinovite | |
Identifiers | |
ECHA InfoCard | 100.038.746 |
PubChem CID
|
|
CompTox Dashboard (EPA)
|
|
Properties | |
MoO2 | |
Molar mass | 127.94 g/mol |
Appearance | brownish-violet solid |
Density | 6.47 g/cm3 |
Melting point | 1,100 °C (2,010 °F; 1,370 K) decomposes |
insoluble | |
Solubility | insoluble in alkalies, HCl, HF slightly soluble in hot H2SO4 |
+41.0·10−6 cm3/mol | |
Structure | |
Distorted rutile (tetragonal) | |
Octahedral (MoIV); trigonal (O−II) | |
Hazards | |
Flash point | Non-flammable |
Related compounds | |
Other anions
|
Molybdenum disulfide |
Other cations
|
Chromium(IV) oxide Tungsten(IV) oxide |
Related molybdenum oxides
|
"Molybdenum blue" Molybdenum trioxide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Molybdenum dioxide is the chemical compound with the formula MoO2. It is a violet-colored solid and is a metallic conductor. It crystallizes in a monoclinic cell, and has a distorted rutile, (TiO2) crystal structure. In TiO2 the oxide anions are close packed and titanium atoms occupy half of the octahedral interstices (holes). In MoO2 the octahedra are distorted, the Mo atoms are off-centre, leading to alternating short and long Mo – Mo distances and Mo-Mo bonding. The short Mo – Mo distance is 251 pm which is less than the Mo – Mo distance in the metal, 272.5 pm. The bond length is shorter than would be expected for a single bond. The bonding is complex and involves a delocalisation of some of the Mo electrons in a conductance band accounting for the metallic conductivity.[1]
MoO2 can be prepared :
- by reduction of MoO3 with Mo over the course of 70 hours at 800 °C. The tungsten analogue, WO2, is prepared similarly.
- 2 MoO3 + Mo → 3 MoO2
Single crystals are obtained by chemical transport using iodine. Iodine reversibly converts MoO2 into the volatile species MoO2I2.[3]
Molybdenum oxide is a constituent of "technical molybdenum oxide" produced during the industrial processing of MoS2:[4][5]
- 2 MoS2 + 7O2 → 2MoO3 + 4SO2
- MoS2 + 6MoO3 → 7MoO2 + 2SO2
- 2 MoO2 + O2 → 2MoO3
MoO2 has been reported as catalysing the dehydrogenation of alcohols,[6] the reformation of hydrocarbons[7] and biodiesel.[8] Molybdenum nano-wires have been produced by reducing MoO2 deposited on graphite.[9] Molybdenum oxide has also been suggested as possible anode material for Li-ion batteries.[10][11]
The mineralogical form of this compound is called tugarinovite, and is only very rarely found.
References
- ^ Oxides: Solid state chemistry McCarroll W.H. Encyclopedia of Inorganic Chemistry Ed R. Bruce King, (1994), John Wiley & sons ISBN 0-471-93620-0
- ^ Cotton, F. Albert; Wilkinson, Geoffrey; Murillo, Carlos A.; Bochmann, Manfred (1999), Advanced Inorganic Chemistry (6th ed.), New York: Wiley-Interscience, ISBN 0-471-19957-5
- ^ Conroy, L. E.; Ben-Dor, L. "Molybdenum(IV) Oxide and Tungsten(IV) Oxides Single-Crystals" Inorganic Syntheses 1995, volume 30, pp. 105–107. ISBN 0-471-30508-1
- ^ Metallurgical furnaces Jorg Grzella, Peter Sturm, Joachim Kruger, Markus A. Reuter, Carina Kogler, Thomas Probst, Ullmans Encyclopedia of Industrial Chemistry
- ^ "Thermal Analysis and Kinetics of Oxidation of Molybdenum Sulfides" Y. Shigegaki, S.K. Basu, M.Wakihara and M. Taniguchi, J. Therm. Analysis 34 (1988), 1427-1440
- ^ A. A. Balandin and I. D. Rozhdestvenskaya, Russian Chemical Bulletin, 8, 11, (1959), 1573 doi:10.1007/BF00914749
- ^ Molybdenum based catalysts. I. MoO2 as the active species in the reforming of hydrocarbons A. Katrib, P. Leflaive, L. Hilaire and G. Maire Catalysis Letters, 38, 1–2, (1996) doi:10.1007/BF00806906
- ^ Catalytic partial oxidation of a biodiesel surrogate over molybdenum dioxide, C.M. Cuba-Torres, et al, Fuel (2015), doi:10.1016/j.fuel.2015.01.003
- ^ Synthesis of Molybdenum Nanowires with Millimeter-Scale Lengths Using Electrochemical Step Edge Decoration M. P. Zach, K. Inazu, K. H. Ng, J. C. Hemminger, and R. M. Penner Chem. Mater. (2002),14, 3206 doi:10.1021/cm020249a
- ^ Shi, Yifeng; Guo, Bingkun; Corr, Serena A.; Shi, Qihui; Hu, Yong-Sheng; Heier, Kevin R.; Chen, Liquan; Seshadri, Ram; Stucky, Galen D. (2009-12-09). "Ordered Mesoporous Metallic MoO2 Materials with Highly Reversible Lithium Storage Capacity". Nano Letters. 9 (12): 4215–4220. doi:10.1021/nl902423a. ISSN 1530-6984.
- ^ Kim, Hyung-Seok; Cook, John B.; Tolbert, Sarah H.; Dunn, Bruce (2015-01-01). "The Development of Pseudocapacitive Properties in Nanosized-MoO2". Journal of The Electrochemical Society. 162 (5): A5083–A5090. doi:10.1149/2.0141505jes. ISSN 0013-4651.