Jump to content

FMK-1 mine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Юкке (talk | contribs) at 07:05, 8 October 2012 (References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The FMK-1 is a small circular Argentinian anti-personnel blast mine, fitted with a stiffened pressure plate it is also used as the fuze for the FMK-3 and FMK-5 anti-tank mines. The mine has a circular plastic body, with a number of small ribs running vertically around the outside of the mine, with the circular detonator and striker protruding on each side. The pressure plate has a distinctive six pointed star shape ribbing for stiffness. The bottom of the mine has small base plug inside which a small stud is installed. The stud increases the activation pressure of the mine. A metal detector disc can be added to the bottom of the mine, but it is not often used.

The mine may have been based on the Russian PMN mine, and it is similar to the Chinese Type 58 mine and Hungarian GYATA 64 mine.

The mine is found in the Falkland Islands where it was used during the Falklands War. Since Argentina has signed the Mine Ban Treaty, the only stocks of the mine that have been retained have the thick pressure cap welded on

Specifications

  • Diameter: 82 mm
  • Height: 40 mm
  • Weight: 253 g
  • Explosive content: 152 g of a TNT/RDX mix
  • Operating pressure:
    • 5 kg (without stud fitted)
    • 15 to 50 kg (with stud fitted)
    • 300 kg (with stud and stiff pressure plate)

See also

References

  • Brassey's Essential Guide to Anti-personnel Landmines, Eddie Banks
  • Jane's Mines and Mine Clearance 2005-2006
  • FMK-1 mine at ORDATA