EACH YEAR IN THE U.S. MORE THAN 500 THOUSAND PEOPLE ARE TREATED FOR LADDER RELATED INJURIES.
THE ESTIMATED ANNUAL COST OF LADDER INJURIES IN THE U.S. IS 24 BILLION DOLLARS.
WE HAVE A SOLUTION THAT WILL KEEP YOU, YOUR EMPLOYEES, AND YOUR LOVED ONES SAFE.
Introducing the Ultimate Way to Get on a Roof
Anyone who has ever stepped off a roof onto a ladder understands the great potential for injury or death. The added support of the Bighorn Stabilizer makes your access to and from the roof easier and more secure.
It also greatly improves job safety. Be assured, as you transition to and from your roof in a more stable and confident manner, you will certainly be more productive as well.
The Bighorn Stabilizer is built out of strong, lightweight aluminum, and stainless steel. It will give you years and years of dependable service.
See The BigHorn Stabilizer in Action
How Does it Work?
The Bighorn Stabilizer has two reinforced channels that slide onto the ladder. Each has a spring-loaded latch that secures it to the ladder rung. Simple quick and easy to install. No modifications required.
The stainless steel legs and rubberized feet easily adjust to the pitch of your roof. Simply remove the pin, set the leg length and re-insert your pin. A hole is provided for anchoring the stabilizer when used on new construction.
Spring Steel tab provides full contact with the ladder rail when the Thumb Screw is tightened.
Anti-slip Tape is installed on the Stabilizer Arc Handles to provide a sure grip on the handle.
Gutter Hooks fasten the stabilizer to the rain gutter. Hooks secure the ladder to the gutter while inhibiting both lateral movement and separation from the roof.
Three (3) Thumb Screws secure the Bighorn Stabilizer to your ladder rails. Thumb screws provide alignment to your ladder rails.
Highly visible Caution Tape, Safety Guarding and Warning decals have been provided to support operator safety.
Removable Poly Caps allow for ladders with Molded End Caps to protrude through the channels.
Poly strip is attached to the underside of the channels providing protection to the rain gutter.
Bighorn Stabilizer can be folded for transport onto a vehicle roof top carrier or to be stored in your garage.
Contact us today with questions or to place an order!
Thank you for your interest, we value all of our customers!
Frequently Asked Questions
Q: Can you transport with the Big Horn Stabilizer attached to the ladder?
A: YES! The Bighorn stabilizer can be easily transported from location to location. Simple, remove the quick pins, rotate the Arc Handles and re insert the pins for transport. Download a copy of the OWNERS MANUAL for complete details.
Q: I have a 4/12 pitch roof, will it work for my application?
A: The Bighorn Stabilizer has been designed to fit a variety of roofs. Simple remove the clip pin and extend the leg to meet your roof. Re insert the clip pin and the foot is now ready for you. Refer to your Owner’s Manual for full details.
Q: I have an aluminum 12 foot extension ladder. Will the Bighorn work for me?
A: Yes the Bighorn Stabilizer will attach to Aluminum and Fiberglass extension ladders.
About Us
As Ben Johnson was observing his neighbor climbing up a ladder to put up Holiday lights, he felt there had to be a safer way for her and others to accomplish household chores that involved using a ladder. Fearing for her safety, he went to work designing a support for an extension ladder that would brace against the roof of a building. The first prototype was effective but heavy and a bit cumbersome so he went back to the design board and developed another "stabilizer" using aluminum and stainless steel. This ladder stabilizer arms fold together for easy storage and travel.
Contact us today with questions or to place an order!