Applied theory

The theory of rate measurements by electrochemistry is mathematically quite difficult, although the experimental measurements are straightforward. The techniques are widely applicable, because conditions can be found for which most compounds are electroactive. However, many questionable kinetic results have been reported, and some of these may be a consequence of unsuitable approximations in applying theory. Another consideration is that these methods are mainly applicable to aqueous solutions at high ionic strengths and that the reactions being observed are not bulk phase reactions but are taking place in a layer of molecular dimensions near the electrode surface. Despite such limitations, useful kinetic results have been obtained. [Pg.183]

From a practical point of view, it would be very desirable to have reliable rules, even if only empirical, which could provide estimates of barrier heights in the absence of experimental data. This would be of obvious use in predicting thermodynamic quantities for stable molecules and would also be most valuable in testing and applying theories of reaction rates. Furthermore, any empirical regularities observed could be helpful in the development of a theoretical treatment of barriers. [Pg.381]

Chandra and his coworkers have developed analytical theories to predict and explain the interfacial solvation dynamics. For example, Chandra et al. [61] have developed a time-dependent density functional theory to predict polarization relaxation at the solid-liquid interface. They find that the interfacial molecules relax more slowly than does the bulk and that the rate of relaxation changes nonmonotonically with distance from the interface They attribute the changing relaxation rate to the presence of distinct solvent layers at the interface. Senapati and Chandra have applied theories of solvents at interfaces to a range of model systems [62-64]. [Pg.415]

Routine Application of Complex Theories. Technical people in the coatings and many other industries tend to shy away from theoretical approaches in their work. There are many legitimate and practical reasons for this, such as complexity of real systems, lack of comprehensive theories, inability to understand theories and the mathematics involved, and time consuming to apply theories. In many cases, it is easier, quicker and more reliable to use the experimental approach. On the other hand, if pertinent theories are computerized and the computer programs contain the required physical properties data, it becomes risk free and easy, to apply theories. We have found that computerization of theories does encourage more people to use them, thus improving both productivity and quality of technical efforts. [Pg.175]

From Applied Theory to Experiment Tailoring a Reactive Intermediate... [Pg.232]

Helium is the second most abundant element in the visible Universe and accordingly there is a mass of data from optical and radio emission lines in nebulae, optical emission lines from the solar chromosphere and prominences and absorption lines in spectra of hot stars. Further estimates are derived more indirectly by applying theories of stellar structure, evolution and pulsation. However, because of the relative insensitivity of Tp to cosmological parameters, combined with the need to allow for additional helium from stellar nucleosynthesis in most objects, the requirements for accuracy are very severe better than 5 per cent to place cosmological limits on Nv and better still to place interesting constraints on t] or One can, however, assert with confidence that there is a universal floor to the helium abundance in observed objects corresponding to 0.23 < Fp < 0.25. [Pg.136]

At least a portion of the problem lies in our inability to separate solvent-free from solvent-dependent quantities. Even in attempting to apply theories such as that of Marcus (2, 3), there remains considerable uncertainty when the analysis is complete. [Pg.88]

In order to answer the questions we have posed, we need to accomplish a number of things. First, we need to measure a reaction rate in the gas phase. Second, we need a framework for interpreting the rate constant and relating the measurement to a potential surface. Third, we need to acquire sufficient information to allow us to extract the value of a barrier height. Then, we can apply theories for interpreting these barrier heights in terms of chemical structure. [Pg.88]

The fracture theory is the most widely applied theory in studying mucoadhesion mechanisms. It accormts for the forces required to separate two sttrfaces after adhesion. The maximttm tensile stress (a) produced dttring detachment can be determined by Eq. (6) by dividing the maximiun force of detachment by the total surface area A ) involved in the adhesive interaction ... [Pg.174]

Frolov, K. V., and Furman, F. A. (1990). Applied Theory of Vibration Isolation Systems, Hemisphere, New York. [Pg.390]

In chromatography the quantitative or qualitative information has to be extracted from the peak-shaped signal, generally superimposed on a background contaminated with noi%. Many, mostly semi-empirical, methods have been developed for relevant information extraction and for reduction of the influence of noise. Both for this purpose and for a quantification of the random error it is necessary to characterize the noise, applying theory, random time functions and stochastic processes. Four main types of statistical functions are used to describe the tosic properties of random data ... [Pg.71]

Emulsions have not been studied as thoroughly as dispersions, probably because of the greater complexity of the former. Emulsions tend to be unstable, and frequently droplets begin to coalesce soon after the emulsion forms. Thus the emulsion is continually changing. In addition, droplets may change shape under shear or when packed tightly together. This makes it difficult to apply theories developed for solid spheres or other well-defined... [Pg.173]

Recently, in order to understand processes on the catalyst surface, in particular structural formations, it has become a frequent practice to apply theories accounting for the interaction of adsorbed atoms. An important microscopic model of such a type is the lattice gas model. Its specific peculiarity is that this model accounts for the interaction of the nearer surface molecules (lateral interactions). It is this model that was applied in refs. 86 and 87. They should be specially emphasized as having exerted a great influence on the interpretation of thermodesorption experiments. The lattice gas model is used, e.g. in a series of investigations by Tovbin and Fedyanin [88, 89] devoted to the kinetics of chemisorption and reactions on catalyst surfaces. In terms of this model, one can interpret the complicated reaction rate dependences of surface coverage observed experimentally... [Pg.67]

The role of electrostatic repulsion in the stability of suspensions of particles in non-aqueous media is not yet clear. In order to attempt to apply theories such as the DLVO theory (to be introduced in Section 5.2) one must know the electrical potential at the surface, the Hamaker constant, and the ionic strength to be used for the non-aqueous medium these are difficult to estimate. The ionic strength will be low so the electric double layer will be thick, the electric potential will vary slowly with separation distance, and so will the net electric potential as the double layers overlap. For this reason the repulsion between particles can be expected to be weak. A summary of work on the applicability or lack of applicability of DLVO theory to non-aqueous media has been given by Morrison [268],... [Pg.115]

The Marcus theory is the most widely applied theory used to describe electron transfer reactions and is equally applicable to photoinduced, interfacial and thermally driven electron transfers. The fundamental difference between these processes lies primarily in the nature of the driving force. In the case of heterogeneous electron... [Pg.19]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...