Atomic emission spectrometry, 4

The history of atomic emission spectrometry (AES) goes back to Bunsen and Kirchhoff, who reported in 1860 on spectroscopic investigations of the alkali and alkali earth elements with the aid of their spectroscope [1], The elements cesium and rubidium and later on thorium and indium were also discovered on the basis of their atomic emission spectra. From these early beginnings qualitative and quantitative aspects of atomic spectrometry were considered. The occurrence of atomic spectral lines was understood as uniequivocal proof of the presence of these elements in a mixture. Bunsen and Kirchhoff in addition, however, also estimated the amounts of sodium that had to be brought into the flame to give a detectable line emission and therewith gave the basis for quantitative analyses and trace determinations with atomic spectrometry. [Pg.192]

These can be performed successfully with AES. Indeed, the unambiguous detection and identification of a single non-interfered atomic spectral line of an element is sufficient to testify to its presence in the radiation source and in the sample. The most intensive line under a set of given working conditions is known as the most sensitive line. These elemental lines are situated for the various elements in widely different spectral ranges and may differ from one radiation source to another, as a result of the excitation and ionization processes. Here the temperatures of the radiation sources are relevant, as the atom and ion lines of which the norm temperatures (see Section 1.4) are closest to the plasma temperatures will be the predominant ones. However, not only will the plasma temperatures but also the analyte dilutions will be important, so as to identify the most intensive spectral lines for a radiation source. Also the freedom from spectral interferences is important. [Pg.193]

In addition, spectral line tables, in which the wavelengths of the spectral lines together with their excitation energy and a number indicating their relative intensity for a certain radiation source are tabulated, are very useful. They are available for different sources, such as arc and spark sources [330-332], but also in a much less complete form for newer radiation sources such as glow discharges [333] and inductively coupled plasmas [334], [Pg.193]

Qualitative analysis by atomic spectrometric methods has now been given totally [Pg.193]

The intensity of an elemental atomic or ion line is used as the analytical signal in quantitative atomic emmision spectrometry. In fact the intensitities are unequivi- [Pg.194]

This chapter deals with optical atomic, emission spectrometry (AES). Generally, the atomizers listed in Table 8-1 not only convert the component of samples to atoms or elementary ions but, in the process, excite a fraction of these species to higher electronic stales.. 4, the excited species rapidly relax back to lower states, ultraviolet and visible line spectra arise that are useful for qualitative ant quantitative elemental analysis. Plasma sources have become, the most important and most widely used sources for AES. These devices, including the popular inductively coupled plasma source, are discussedfirst in this chapter. Then, emission spectroscopy based on electric arc and electric spark atomization and excitation is described. Historically, arc and spark sources were quite important in emission spectrometry, and they still have important applications for the determination of some metallic elements. Finally several miscellaneous atomic emission source.s, including jlanies, glow discharges, and lasers are presented. [Pg.254]

Throughout this chapter, this logo indicates an opportunity for online self-study at www. thomsonedii.coin/clienus(ry/skoag, linking you to interactive tutorials, simulations, and exercises. [Pg.254]

FIGURE 10-1 A typical ICP source. Position A shows radial viewing of the torch, and position B shows axial viewing. (From V. A. Fassel. Science. 1978.202,185. With permission. Copyright 1978 by the American Association for the Advancement of Science.) [Pg.255]

Ptaouu III nal iual. Momie Spccir.neopx. 2nd cd A. MiintassT and [Pg.255]

FIGURE 10-2 The Meinhard nebulizer. The nebulizing gas flows through an opening lhat surrounds the capillary concentrically. This causes a reduced pressure at the tip and aspiration of the sample. The high-velocity gas at the tip breaks up the solution into a mist. (Courtesy of J. Meinhard Associates. Inc.) [Pg.256]

Principles and Characteristics Under appropriate conditions, all elements can be made to emit characteristic spectra. Unfortunately, no single excitation source [Pg.613]

Plasma sources were developed for emission spectrometric analysis in the late-1960s. Commercial inductively coupled and d.c. plasma spectrometers were introduced in the mid-1970s. By comparison with AAS, atomic plasma emission spectroscopy (APES) can achieve simultaneous multi-element measurement, while maintaining a wide dynamic measurement range and high sensitivities and selectivities over background elements. As a result of the wide variety of radiation sources, optical atomic emission spectrometry is very suitable for multi-element trace determinations. With several techniques, absolute detection limits are below the ng level. [Pg.614]

The main detectors used in AES today are photomultiplier tubes (PMTs), photodiode arrays (PDAs), charge-coupled devices (CCDs), and vidicons, image dissectors, and charge-injection detectors (CIDs). An innovative CCD detector for AES has been described [147]. New developments are the array detector AES. With modem multichannel echelle spectral analysers it is possible to analyse any luminous event (flash, spark, laser-induced plasma, discharge) instantly. Considering the complexity of emission spectra, the importance of spectral resolution cannot be overemphasised. Table 8.25 shows some typical spectral emission lines of some common elements. Atomic plasma emission sources can act as chromatographic detectors, e.g. GC-AED (see Chapter 4). [Pg.614]

After Sullivan [148]. Reproduced by permission of Hewlett Packard. [Pg.614]

Applications Atomic emission spectrometry has been used for polymer/additive analysis in various forms, such as flame emission spectrometry (Section 8.3.2.1), spark source spectrometry (Section 8.3.2.2), GD-AES (Section 8.3.2.3), ICP-AES (Section 8.3.2.4), MIP-AES (Section 8.3.2.6) and LIBS. Only ICP-AES applications are significant. In hyphenated form, the use of element-specific detectors in GC-AED (Section 4.2) and PyGC-AED deserves mentioning. [Pg.615]

The reader will recall from Chapter 1 that when a specific atom in the ground state E0 absorbs energy in, discrete amounts E it is raised to the excited state Ex. This discrete amount of energy is called a quantum. [Pg.66]

A flame emission spectrometer therefore consists of an atom source, a monochromator and detector and is therefore simpler instrumentally than the corresponding atomic absorption system. Particular developments engendered by atomic absorption have restimulated interest in flame emission spectrometry after a dormant period. Chief of these is the use of the nitrous oxide—acetylene flame which is sufficiently hot to stimulate thermal atomic-emission from a wide range of metal elements. [Pg.66]

The technique of atomic emission does not require a hollow-cathode lamp for the analyte element and therefore an analysis may be contemplated for elements for which the laboratory does not possess a hollow-cathode lamp. [Pg.66]

Flame emission techniques generally, require that the monochromator be more strongly resolving than in atomic absorption techniques. In other words the analyst has to use narrower slits in the monochromator. The most effective way to find the best slit to use in a particular instance is to measure the signal-to-noise ratio, that is the percent relative standard deviation for a series of measurements on a suitable standard with each of the slits that are available. The analyst may be surprised to find that in practice the best precision is very often found with extremely narrow spectral bandwidths. This is because unwanted spectral interference is filtered out from the flame. [Pg.66]

The following elements have better detectability in simple solutions by flame emission techniques compared with atomic absorption techniques Ca, Ba, Y, La, W, Re, Ir, In, Al, Sn, most rare earths, all alkali metals. [Pg.66]

Inductively coupled argon plasma (icp) and direct current argon plasma (dcp) atomic emission spectrometry are solution techniques that have been appHed to copper-beryUium, nickel—beryUium, and aluminum—beryUium aUoys, beryUium compounds, and process solutions. The internal reference method, essential in spark source emission spectrometry, is also useful in minimizing drift in plasma emission spectrometry (17). Electrothermal (graphite... [Pg.68]

Several instmmental methods are available for quantitative estimation of from moderate to trace amounts of cerium in other materials. X-ray fluorescence is widely available, versatile, and suitable for deterrninations of Ce, and any other Ln, at percent levels and lower in minerals and purer materials. The uv-excited visible luminescence of cerium is characteristic and can be used to estimate Ce content, at ppm levels, in a nonluminescing host. X-ray excited optical luminescence (15), a technique especially appropriate for Ln elements including cerium, rehes on emissions in the visible, and also measures ppm values. Atomic emission spectrometry is appHcable to most lanthanides, including Ce (16). The precise lines used for quantitative measurement must be chosen with care, but once set-up the technique is suitable for routine analyses. [Pg.368]

In the context of chemometrics, optimization refers to the use of estimated parameters to control and optimize the outcome of experiments. Given a model that relates input variables to the output of a system, it is possible to find the set of inputs that optimizes the output. The system to be optimized may pertain to any type of analytical process, such as increasing resolution in hplc separations, increasing sensitivity in atomic emission spectrometry by controlling fuel and oxidant flow rates (14), or even in industrial processes, to optimize yield of a reaction as a function of input variables, temperature, pressure, and reactant concentration. The outputs ate the dependent variables, usually quantities such as instmment response, yield of a reaction, and resolution, and the input, or independent, variables are typically quantities like instmment settings, reaction conditions, or experimental media. [Pg.430]

Plasma atomic emission spectrometry is also employed as a detection method for gc (see Plasma technology). By monitoring selected emission lines a kind of selective detection based on elemental composition can be achieved (see Spectroscopy). [Pg.108]

The developed assay was successfully applied for the arsenite and arsenate determination in contaminated waters of the gold recovery plant and in snow covers of the industrial anthropogenic sources vicinities as well. The data produced are in a good agreement with the results of independent methods atomic absorptioin and atomic emission spectrometry and capillary electrophoresis. [Pg.428]

ON-LINE COUPLING OF CONTINUOUS-FLOW FRACTIONATION OF HEAVY METALS IN ENVIRONMENTAL SOLIDS WITH ATOMIC EMISSION SPECTROMETRY... [Pg.459]

P. W. J. M. Boumans. Line Coincidence Tables for Inductively Coupled Plasma Atomic Emission Spectrometry. Pergamon Press, Oxford, 1980, 1984. Lists of emission lines for analysis and potentially overlapping lines with relative intensities, using spectrometers with two different resolutions. [Pg.644]

Aluminium, boron, silicon Inductively coupled plasma atomic emission spectrometry ... [Pg.318]

Minganti V, Capelli R, Depellegrini R (1995) Evaluation of different derivatization methods for the multielement detection of Hg, Pb and Sn compounds by gas chromatography-microwave induced plasma-atomic emission spectrometry in environmental samples. Fresenius Journal of Analytical Chemistry, 351 (4-5) 471 77. [Pg.48]

Pt content determined by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Monolayer uptakes (P = 0) determined at 295 K. [Pg.157]

Moens L, Verreft P, Boonen S, Vanhaecke F and Dams R (1995) Solid sampling electrothermal vaporization for sample introduction in inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry. Spectrochim Acta 508 463-475. Mooijman KA, In t Veld PH, Hoekstra JA, Heisterkamp SH, Havelaar AH, Notermans SHW, Roberts D, Griepink B, Maier E (1992) Development of Microbiological Reference Materials. European Commission Report EUR 14375 EN, Community Bureau of Reference, Brussels. [Pg.46]

ScHiFFER U, Krivan V (i999) A graphite furnace electrothermal vaporization system for inductively coupled plasma atomic emission spectrometry. Anal Chem 70 482-490. [Pg.47]

With solid sampling-electrothermal vaporization-inductively coupled atomic emission spectrometry (SS-ETV-ICP-AES), Cu in two environmental CRMs was determined using a third CRM with similar matrix as calibrant. Comparison with a reference solution showed good agreement (Verrept et al. 1993). [Pg.141]

Verrept P, Dams R, Kurfurst U 1993) Electrothermal vaporisation inductively coupled plasma atomic emission spectrometry for the analysis of solid samples contribution to instrumentation and methodology. Fresenius 2 Anal Chem 345 1035-1041. [Pg.153]

Magnesium deficiency has been long recognized, but hypermagnesia also occurs (Anderson and Talcott 1994). Magnesium can be determined in fluids by FAAS, inductively coupled plasma atomic emission spectrometry (ICP-AES) and ICP-MS. In tissue Mg can be determined directly by solid sampling atomic absorption spectrometry (SS-AAS) (Herber 1994a). Both Ca and Mg in plasma/serum are routinely determined by photometry in automated analyzers. [Pg.202]

Method abbreviations D-AT-FAAS (derivative flame AAS with atom trapping), ETAAS (electrothermal AAS), GC (gas chromatography), HGAAS (hydride generation AAS), HR-ICP-MS (high resolution inductively coupled plasma mass spectrometry), ICP-AES (inductively coupled plasma atomic emission spectrometry), ICP-MS (inductively coupled plasma mass spectrometry), TXRF (total reflection X-ray fluorescence spectrometry), Q-ICP-MS (quadrapole inductively coupled plasma mass spectrometry)... [Pg.219]

Note that the interfacing of LC techniques with MS puts significant constraints on the solvents that can be used i.e., they must be volatile, with a low salt concentration, for MS compatibility. Narrow-bore columns, which use much smaller amounts of salt and organic modifier, appear to have potential for facilitating IEC-MS applications.40 Despite the excellent sensitivity of MS detection for most elements, however, there are cases where matrix effects can interfere. In this situation, combination of IEC with atomic emission spectrometry (AES) or atomic absorption spectrometry (AAS) may be preferable, and can also provide better precision.21 32 4142 Other types of... [Pg.288]

Sample destruction for classical 8.3.2 Atomic emission spectrometry. 613... [Pg.585]

Principles and Characteristics Flame emission instruments are similar to flame absorption instruments, except that the flame is the excitation source. Many modem instruments are adaptable for either emission or absorption measurements. Graphite furnaces are in use as excitation sources for AES, giving rise to a technique called electrothermal atomisation atomic emission spectrometry (ETA AES) or graphite furnace atomic emission spectrometry (GFAES). In flame emission spectrometry, the same kind of interferences are encountered as in atomic absorption methods. As flame emission spectra are simple, interferences between overlapping lines occur only occasionally. [Pg.615]

Spark sources are especially important for metal analysis. To date, medium-voltage sparks (0.5-1 kV) often at high frequencies (1 kHz and more), are used under an argon atmosphere. Spark analyses can be performed in less than 30 s. For accurate analyses, extensive sets of calibration samples must be used, and mathematical procedures may be helpful so as to perform corrections for matrix interferences. In arc and spark emission spectrometry, the spectral lines used are situated in the UV (180-380nm), VIS (380-550nm) and VUV (<180 nm) regions. Atomic emission spectrometry with spark excitation is a standard method for production and product control in the metal industry. [Pg.615]

Inductively Coupled Plasma-Atomic Emission Spectrometry... [Pg.619]

Conventional ICP-AES has similar detection limits to FA AS (although inferior to those of ICP-MS) and is much faster when many elements are determined in the same sample. The detection limits of modem, fast ICP-AES are equal to those of conventional, slow GFAAS. Table 8.31 compares the detection power of various atomic emission spectrometries. The greater... [Pg.621]

See also in sourсe #XX -- [ Pg.360 ]

See also in sourсe #XX -- [ Pg.288 ]

See also in sourсe #XX -- [ Pg.21 ]

See also in sourсe #XX -- [ Pg.56 , Pg.57 ]

See also in sourсe #XX -- [ Pg.270 ]

See also in sourсe #XX -- [ Pg.227 , Pg.263 ]

See also in sourсe #XX -- [ Pg.253 ]

See also in sourсe #XX -- [ Pg.192 ]

See also in sourсe #XX -- [ Pg.22 ]

See also in sourсe #XX -- [ Pg.242 ]

See also in sourсe #XX -- [ Pg.522 , Pg.1204 ]

See also in sourсe #XX -- [ Pg.276 , Pg.309 , Pg.388 , Pg.397 , Pg.427 , Pg.481 , Pg.532 , Pg.534 ]

See also in sourсe #XX -- [ Pg.4 , Pg.11 , Pg.12 , Pg.140 ]

See also in sourсe #XX -- [ Pg.103 ]

See also in sourсe #XX -- [ Pg.65 , Pg.66 , Pg.223 , Pg.248 , Pg.277 , Pg.583 , Pg.656 ]

See also in sourсe #XX -- [ Pg.192 ]

See also in sourсe #XX -- [ Pg.179 ]

See also in sourсe #XX -- [ Pg.207 ]

See also in sourсe #XX -- [ Pg.115 , Pg.409 ]

See also in sourсe #XX -- [ Pg.1359 ]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...