Buildings materials

Special software (HILLGUS) was also developed for material characterizations such as the determination of the modulus of elasticity for building materials. [Pg.859]

Building applications Building material Building materials... [Pg.136]

Migration of water vapor through building materials (especially important in low dew-point appHcation)... [Pg.360]

J. W. Hunter and R. A. Hyde, Eight Gas Gun Systemfor Eaunching Building Material into Eow Earth Orbit, VCRL-99623, Lawrence Livermore Lab (LLL), Livermore, Calif., July 1989. [Pg.55]

ASTM E119-88 building materials fire endurance... [Pg.465]

The other purpose for which physical evidence is used is to develop associative evidence in a case. Physical evidence may help to prove a victim or suspect was at a specific location, or that the two came in contact with one another. In one case, building material debris (wooden splinters, tar paper, insulation material) was found on a blanket used to wrapped a body that was found dumped at the side of a road. The evidence suggested an attic and eventually led detectives to the location where the murder occurred. [Pg.485]

AH materials, even those considered to be sound-reflecting, absorb some small fraction of the sound energy impinging on them. Table 1 provides sound-absorption coefficients for some common building materials. [Pg.311]

Table 1. Sound-Absorption Coefficients (a) for Some Common Building Materials...

Puilding lime may be quick or hydrated lime, but usually coimotes the latter, where the physical characteristics make it suitable for ordinary or special stmctural purposes (see Building materials, survey). [Pg.164]

Microscopists in every technical field use the microscope to characterize, compare, and identify a wide variety of substances, eg, protozoa, bacteria, vimses, and plant and animal tissue, as well as minerals, building materials, ceramics, metals, abrasives, pigments, foods, dmgs, explosives, fibers, hairs, and even single atoms. In addition, microscopists help to solve production and process problems, control quaUty, and handle trouble-shooting problems and customer complaints. Microscopists also do basic research in instmmentation, new techniques, specimen preparation, and appHcations of microscopy. The areas of appHcation include forensic trace evidence, contamination analysis, art conservation and authentication, and asbestos control, among others. [Pg.328]

Ores which comprise a variety of minerals are, as a rule, heterogeneous. An ore body is usually named for the most important mineral (s) in the rock, referred to as value minerals, mineral values, or simply values. Some minerals contain metals, which are extracted by concentration and smelting. Other minerals, such as diamond, asbestos (qv), quartz (see Silicon COMPOUNDS), feldspars, micas (see Mica), gypsum, soda, mirabillite, clays (qv), etc, maybe used either as found, with some or no pretreatment, or as stock materials for industrial compounds or building materials (qv) (3). [Pg.392]

Paint is one of the most common and widely used materials in home and building constmction and decoration (see Building materials). Its broad use comes from its abiHty to provide not only improved appearance and decoration but also protection of a substrate to which it is appHed. Evidence of the historical uses of paint goes back over 25,000 years to cave paintings found in Europe. The Bible describes pitch being used to coat and protect Noah s Ark. Over 10,000 years ago in the Middle East, various minerals and metals such as lime, siHca, copper and iron oxides, and chalk were mixed and reacted to produce many colors. Resins from plant sap and casein were also used. Over 2000 years ago in Asia, resins refined from insect secretions and sap from trees were used to make clear lacquers and varnishes (2). [Pg.540]

About 60% of the natural iron oxide pigments is used to color cement and other building materials (qv). About 30% is consumed in the production of paints. For coloring plastics and mbber, synthetic iron oxide pigments are preferred. The main advantage of the natural iron oxide pigments, as compared to the synthetic ones, is cost. However, the quaHty is inferior, and in most cases, they are consumed in close proximity to the mines. As colorants, the natural iron oxides are about 50% weaker than synthetically produced iron oxides. [Pg.11]

Nonionic surfactants and phenoUc resins based on alkylphenols are mature markets and only moderate growth in these derivatives is expected. Concerns over the biodegradabiUty and toxicity of these alkylphenol derivatives to aquatic species may limit their use in the future. The use of alkylphenols in the production of both polymer additives and monomers for engineering plastics is expected to show above average growth as plastics continue to replace traditional building materials. [Pg.57]

Asphalt Roofing Components. Asphalt (qv) is a unique building material which occurs both naturally and as a by-product of cmde-oil refining. Because the chemical composition of cmde oils differs from source to source, the physical properties of asphalts derived from various cmdes also differ. However, these properties can be tailored by further ptocessiag to fit the appHcation for which the asphalt will be used. Softening poiat, ductility, flash poiat, and viscosity—temperature relationship are only a few of the asphalt properties that ate important ia the fabricatioa of roofing products. [Pg.211]

This article discusses traditional hull ding and construction products, ie, not made from synthetic polymers (see Building materials, plastic), including wood, asphalt, gypsum, glass products, Pordand cement, and bricks. The article presents information about each basic material, the products made from it, the basic processes by which the products or materials are produced, estimates of the quantity or doUar value of the quantities produced or used in the United States, and some pertinent chemical or physical properties related to the material. More detailed chemical and physical property data can be found in articles devoted to the individual materials (see Asphalt Cement Glass Wood). [Pg.317]

Wood (qv) is arguably the oldest building material used by humans to constmct their dweUings. It is a natural product obtained from trees, used in both stmctural and decorative appHcations. The chemical composition of wood is largely cellulose (qv) and lignin (qv). Today there are a variety of composite or reconstituted wood products, such as plywood, particle board, wood fiber boards, and laminated stmctural beams, where small pieces of wood or wood fiber are combined with adhesives to make larger sheets or boards (see Laminates). [Pg.317]

Bricks are the oldest manufactured building material in use. Sun-dried bricks were manufactured as eady as 6000 BC, and fired bricks were used during the Middle Ages. Today s bricks differ very Htde except in the efficiency of manufacture they ate stiU made from clay or shale, a clay-based sedimentary rock that is kiln-fired. [Pg.324]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...