Cellulose bulk materials

Microcrystalline cellulose is a stable though hygroscopic material. The bulk material should be stored in a well-closed container in a cool, dry place. [Pg.133]

Of the bulk materials used in papermaking, cellulose fibre is the most abundant, indeed in itself defining paper as a material. The wood fibre is a composite, built up in different layers, as shown schematically in Figure 7.1. [Pg.125]

The preparation of nano-scaled polymeric assemblies such as nanofibers is one of the most useful methods to practically utilize polymeric materials as observed in the case of cellulose (Abe at al., 2007, Saito et al., 2006, Saito et al., 2007). For example, self-assembled fibrillar nanostructures from cellulose are promising materials for the practical applications in bio-related research fields such as tissue engineering (Isogai et al., 2011, Abdul Khalil et al., 2012). The efficient methods have also been developed for the preparation of chitin nanofibers. The conventional approaches to the production of chitin nanofibers are mainly performed upon top-down procedures that break down the starting bulk materials from chitin resources (Figure 2). [Pg.369]

A finely divided form of cellulose called microcrystalline cellulose is produced by appropriate physical and chemical processing of cellulose. This material has many uses in foods in which it imparts smoothness, stability, and a quality of thickness. Microcrystalline cellulose is also used in pharmaceutical preparations and cosmetics. When added to food, indigestible cellulose contributes bulk and retains moisture. [Pg.421]

Pourmortazavi et al. studied both azidodeoxy nitrate cellulose (ACN) and PU electrospun fibers, thus comparing their thermal stability with their bulk materials, respectively, reporting that nanofibers of both ACN and PU have lower thermal stabilities in comparison with their bulk form [147]. [Pg.184]

The results have demonstrated that ECAP technique can be taken as an effective process to produce bulk plastic materials from cellulose powder, a feat difficult to achieve by any other conventional pol5mier thermal processing methods. The low processing temperature is an important advantage to overcome the low thermal stability of cellulose-based materials in processing. [Pg.166]

Zhang, X., Wu, X., Gao, D., Xla, K. [2012]. Bulk cellulose plastic materials from processing cellulose powder using back pressure equal channel angular pressing, Carbohydr. Polym., 87,2470-2476. [Pg.179]

Molecular modeling has been demonstrated to be a useful tool in the characterization of many different types of chemical systems, including bulk materials. Many properties can be computed with an accuracy that is comparable to experimental capabilities [6]. Simulation of properties is especially important for systems that are challenging to study experimentally due to their limited solubility in common solvents. In some other cases, the experiment itself may be difficult due either to sensitivity to sample preparation or to ambiguities in the interpretation of the results. When the system consists of a relatively small number of atoms, both traditional ab initio and density functional methods can be employed. In the case of sugar molecules and disaccharides, a number of studies have been carried out to develop force field methods [7] to be used in molecular dynamics simulations while studying the conformations of cellulose and its interactions with water and other molecules [8-16]. [Pg.48]

Filter aids should have low bulk density to minimize settling and aid good distribution on a filter-medium surface that may not be horizontal. They should also be porous and capable of forming a porous cake to minimize flow resistance, and they must be chemically inert to the filtrate. These characteristics are all found in the two most popular commercial filter aids diatomaceous silica (also called diatomite, or diatomaceous earth), which is an almost pure silica prepared from deposits of diatom skeletons and expanded perhte, particles of puffed lava that are principally aluminum alkali siheate. Cellulosic fibers (ground wood pulp) are sometimes used when siliceous materials cannot be used but are much more compressible. The use of other less effective aids (e.g., carbon and gypsum) may be justified in special cases. Sometimes a combination or carbon and diatomaceous silica permits adsorption in addition to filter-aid performance. Various other materials, such as salt, fine sand, starch, and precipitated calcium carbonate, are employed in specific industries where they represent either waste material or inexpensive alternatives to conventional filter aids. [Pg.1708]

In terms of tonnage the bulk of plastics produced are thermoplastics, a group which includes polyethylene, polyvinyl chloride (p.v.c.), the nylons, polycarbonates and cellulose acetate. There is however a second class of materials, the thermosetting plastics. They are supplied by the manufacturer either as long-chain molecules, similar to a typical thermoplastic molecule or as rather small branched molecules. They are shaped and then subjected to either heat or chemical reaction, or both, in such a way that the molecules link one with another to form a cross-linked network (Fig. 18.6). As the molecules are now interconnected they can no longer slide extensively one past the other and the material has set, cured or cross linked. Plastics materials behaving in this way are spoken of as thermosetting plastics, a term which is now used to include those materials which can in fact cross link with suitable catalysts at room temperature. [Pg.916]

Chapter 3 through Chapter 8 deal with the basic aspects of the practical uses of PLC. Chapter 3 describes sorbent materials and precoated layers for normal or straight phase (adsorption) chromatography (silica gel and aluminum oxide 60) and partition chromatography (silica gel, aluminum oxide 150, and cellulose), and precoated layers for reversed-phase chromatography (RP-18 or C-18). Properties of the bulk sorbents and precoated layers, a survey of commercial products, and examples of substance classes that can be separated are given. [Pg.8]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...