Electronic controls

Portable industrial PC with additional control electronics and application program... [Pg.775]

SAMs are generating attention for numerous potential uses ranging from chromatography [SO] to substrates for liquid crystal alignment [SI]. Most attention has been focused on future application as nonlinear optical devices [49] however, their use to control electron transfer at electrochemical surfaces has already been realized [S2], In addition, they provide ideal model surfaces for studies of protein adsorption [S3]. [Pg.397]

Taxonomj No. 2.2.1,1 Equipment Description CONTROLLERS - ELECTRONIC PANELBOARD (SINGLE LOOP) ... [Pg.177]

Fleterocyclic bridging ligands in controlling electronic and magnetic properties in polynuclear complexes 98ACR842. [Pg.205]

There are many thousands of outstanding applications where plastics are used in electrical designs. The designers imaginations have excelled in developing new plastic products. An example is the folded membrane and snap switches in controlling electronic devices. [Pg.389]

It is usually done by computer controlled electronic weighing scales that supply precise amounts of each ingredient to a high intensity mixer. The still-dry, free-flowing blend is then charged to a feed hopper where it is screw fed into a continuous mixer such as an extruder and/or kneader. Under the action of a mixer s reciprocating screw in the confined volume of the mixer chamber, the blend begins to flux or masticate into the required plastic state. [Pg.526]

Elegant evidence that free electrons can be transferred from an organic donor to a diazonium ion was found by Becker et al. (1975, 1977a see also Becker, 1978). These authors observed that diazonium salts quench the fluorescence of pyrene (and other arenes) at a rate k = 2.5 x 1010 m-1 s-1. The pyrene radical cation and the aryldiazenyl radical would appear to be the likely products of electron transfer. However, pyrene is a weak nucleophile the concentration of its covalent product with the diazonium ion is estimated to lie below 0.019o at equilibrium. If electron transfer were to proceed via this proposed intermediate present in such a low concentration, then the measured rate constant could not be so large. Nevertheless, dynamic fluorescence quenching in the excited state of the electron donor-acceptor complex preferred at equilibrium would fit the facts. Evidence supporting a diffusion-controlled electron transfer (k = 1.8 x 1010 to 2.5 X 1010 s-1) was provided by pulse radiolysis. [Pg.208]

These problems have been improved in recent years by the microfabrication of sharp tips with radii less than 10 nm, the observation in an SEM or STEM of the exact radius before and after the experiment, the use of robust carbon-nanotube probes, and general improvements in control electronics. However, another method used initially was the attachment of a small colloid particle in place of the AFM tip. These particles were considered a reasonably good approximation to a single-asperity contact their radii were accurately known and remained the same for the duration of the experiment. Such probes have also been used to investigate colloids where surface roughness is an important aspect of the colloid interaction. [Pg.49]

OS 62] ]R 1] ]P 45] Improved pressure control was exerted for catalyst plug-induced ethylene polymerization by using advanced pressure control electronics [1]. In the regions of large temperature increase, the pressure fluctuated slightly this effect diminished downstream. [Pg.507]

Tang, J. and Marcus, R. A. (2005) Diffusion-controlled electron transfer processes and power-law statistics of fluorescence intermittency of nanoparticles. Phys. Rev. Lett, 95, 107401-1-107401-4 Tang, J. and Marcus, R. A. (2005) Mechanisms of fluorescence blinking in semiconductor nanocrystal quantum dots./. Chem. Phys., 123,054704-1-054704-12. [Pg.169]

Tang, J. and Marcus, R. A. (2005) Diffusion-controlled electron transfer processes and power-law statistics of fluorescence intermittency of nanoparticles. Phys. Rev. Lett., 95, 107401. [Pg.314]

We now proceed to look at three examples from recent work in some depth. In the first example, we wish to illustrate that a knowledge of the VB structure or of the states involved in photophysics and photochemistry rationalize the potential surface topology in an intuitively appealing way. We then proceed to look at an example where the extended hyperline concept has interesting mechanistic implications. Finally, we shall look at an example of how conical intersections can control electron transfer problems. [Pg.397]

An alternative form of split injection is the timed split technique, Figure 6.11 [130,131,133]. In this case the column is connected directly to the valve and the valve actuator is controlled electronically to turn the valve to the inject position and back very rapidly with only a portion of the sample in the loop displaced to the column. Timed split allows variable volumes to be injected by changing the valve actuator tine and provides more reproducible splitting than the dynamic split technique. However, it suffers from many of the same problems as dynamic split, namely, poor accuracy, split ratios that depend on pressure, and high detection limits. [Pg.834]

This means that id (diffusion-controlled) is proportional to the square root of he(f and its linear plot passes through the origin, which property is often used as a check on the diffusion-controlled electron-transfer reaction14. [Pg.135]

Wireless pH measurement systems have been used in clinical studies. Unlike a standalone pH electrode, a power source, control electronics, and a signal transmitter have to be incorporated into a wireless system. Watanabe et al. [138] have reported a wireless pH sensor to record salivary pH continuously. The sensor system transmits pH data via a telemetry system for about 19 hours with a 3V lithium battery (190mAh). The error of transmitted pH data was less than 0.15 pH in the range of pH 5.0 to 9.0. [Pg.310]

Jiang P, Morales GM, You W, Yu LP (2004) Synthesis of diode molecules and their sequential assembly to control electron transport. Angew Chem Int Ed 43 4471 1475... [Pg.83]

Li C, Mishchenko A, Li Z, Pobelov I, Wandlowski T, Li XQ, Wurthner F, Bagrets A, Evers F (2008) Electrochemical gate-controlled electron transport of redox-active single perylene bisimide molecular junctions. J Phys Condens Matter 20 374122... [Pg.117]

Ricks AB, Solomon GC, Colvin MT, Scott AM, Chen K, Ratner MA, Wasielewski MR (2010) Controlling electron transfer in donor-bridge-acceptor molecules using cross-conjugated bridges. J Am Chem Soc 132 15427... [Pg.266]

Figure 1.6. Application of large-area embedded flexible control electronics includes structural health monitoring of large objects such as airframes.

The ability to synthesize NWs rationally with controlled electronic properties and to assemble NWs into regular arrays readily enables exploration of these NW structures for a variety of functional device arrays. [Pg.358]

Fig. 3.31 The KAMINA demonstrator. The lifted device head shows the gradient microarray which receives ambient air by a fan. The complete microprocessor-controlled electronics is contained in the lower part of the device.

When a sensor is used in an appliance, additional components like a low-voltage power supply and control electronics are required. As these components have a big influence on the actual cost price of the product, it is very important that the cost price of the sensor is reduced to the bare minimum, since a lower cost price makes the product more competitive. [Pg.72]

N itric oxide synthases reveal a role for calmodulin in controlling electron transfer, Proc. Natl. Acad. Sci. USA 90 (1993), p. 10769-10772... [Pg.276]

The costs of a PEMFC stack are composed of the costs of the membrane, electrode, bipolar plates, platinum catalysts, peripheral materials and the costs of assembly. For the fuel-cell vehicle, the costs of the electric drive (converter, electric motor, inverter, hydrogen and air pressurisation, control electronics, cooling systems, etc.) and the hydrogen storage system have to be added. Current costs of PEM fuel-cell stacks are around 2000/kW, largely dominated by the costs of the bipolar plates and... [Pg.360]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...