Coordinates transformation

The length of a vector v is written as v, which is obtained by using an inner [Pg.285]

Consider the coordinate transformation from a system %, into another system x[, which is shown in Fig. A.2. The base vectors are e, and e corresponding to each coordinate system. A transformation can be written as [Pg.285]

Let an angle between e[ and ej be % as shown in Fig.A.2a for the three-dimensional case, and we have [Pg.285]

For the two-dimensional case shown in Fig. A.2b, we have cos(jr/2 — 9) = sin0, cos 2 jt/2—9) =-sin0, so that we have the following simplified relationship [Pg.286]

If a vector v is transformed into v hy Q, we have a similar rule to (A.l 1) [Pg.286]

A new one-dimensional mierowave imaging approaeh based on suecessive reeonstruetion of dielectrie interfaees is described. The reconstruction is obtained using the complex reflection coefficient data collected over some standard waveguide band. The problem is considered in terms of the optical path length to ensure better convergence of the iterative procedure. Then, the reverse coordinate transformation to the final profile is applied. The method is valid for highly contrasted discontinuous profiles and shows low sensitivity to the practical measurement error. Some numerical examples are presented. [Pg.127]

Figure 13. Vibrational levels for the first-excited electronic state of HD2 calculated [8] using split basis (SB) technique with A(R) = tp/2 coordinate-transformation (CT) treatment with A(R) — tp/2 Eq. (A. 14) with A (R) — y(p, 9, tp). Shown by the longer line segments are the levels assuming different values in two sets of calculations.

This coordinate transformation gives rise to a corresponding transformation of the momenta via the canonical lift transformation [10]. Thus the corresponding conjugate momenta are p R, defined by... [Pg.287]

Coordinate transformation between local and global systems - mapping... [Pg.51]

Note that in the one-dimensional problem illustrated here the Jacobian of coordinate transformation is simply expressed as dx7d and therefore... [Pg.52]

Auxiliary subroutines for handling coordinate transformation between local and global systems, quadrature, convergence checking and updating of physical parameters in non-linear calculations. [Pg.196]

JACOBIAN OB COORDINATES TRANSFORMATION Ik DERIVATIVES OF THE SHAPE FUNCTIOl lS WRT GLOBAL, VARIABT.ES IMPLICIT DOUBLE PRECISION(A-H,0-Z)... [Pg.228]

When the operation is a rotation by an angle 4> about a C axis, in this case by an angle of 2n/3 radians about the C3 axis, the resulting coordinate transformation, a result which will not be derived here, is given by... [Pg.94]

This is the hypoelastic constitutive equation considered by Truesdell (see Truesdell and Noll [20]). In large deformations, this equation should be independent of the motion of the observer, a property termed objectivity, i.e., it should be invariant under rigid rotation and translation of the coordinate frame. In order to investigate this property, a coordinate transformation (A.50) is applied. If the elastic stress rate relation is to be unchanged in the new coordinate system denoted x, then... [Pg.149]

In Section 5.2 the set of internal state variables k was introduced. In the referential theory, a similar set of referential internal state variables K will be introduced in the same way without further physical identification at this stage. It will merely be assumed that each member of the set K is invariant under the coordinate transformation (A.50) representing a rigid rotation and translation of the coordinate frame. [Pg.154]

The objectivity of the spatial stress rate relation (5.154) may be investigated by applying the coordinate transformation (A.50) representing a rotation and translation of the coordinate frame. The spatial strain and its convected rate are indifferent by (A.58) and (A.62). So are the stress and its Truesdell rate. It is readily verified from (5.151), (5.152), and the fact that K has been assumed to be invariant, that k and its Truesdell rate are also indifferent. Using these facts together with (A.53) in (5.154) with c and b given by (5.155)... [Pg.158]

It is expected that constitutive equations should be invariant to relative rigid rotation and translation between the material and the coordinate frame with respect to which the motion is measured, a property termed objectivity. In order to investigate this invariance, the coordinate transformation... [Pg.178]

Thus F is not indifferent under the coordinate transformation (A.50) in the sense of (A.52). The Jacobian transforms as... [Pg.179]

Angle-ply laminates have more complicated stiffness matrices than cross-ply laminates because nontrivial coordinate transformations are involved. However, the behavior of simple angle-ply laminates (only one angle, i.e., a) will be shown to be simpler than that of cross-ply laminates because no knee results in the load-deformation diagram under uniaxial loading. Other than the preceding two differences, analysis of angle-ply laminates is conceptually the same as that of cross-ply laminates. [Pg.255]

To prevent this kink, Gorev and Bystrov (1985) suggested a correction by a properly chosen coordinate transformation. The substitution was chosen in such a way that the equations after linearization describe the desired behavior in the near-shock region during the period when the influence of the correction fades gradually towards the piston. In this way, Gorev and Bystrov (1985) obtained an approximate solution which holds for the entire flow field. [Pg.101]

Some coordinate transformations are non-linear, like transforming Cartesian to polar coordinates, where the polar coordinates are given in terms of square root and trigonometric functions of the Cartesian coordinates. This for example allows the Schrodinger equation for the hydrogen atom to be solved. Other transformations are linear, i.e. the new coordinate axes are linear combinations of the old coordinates. Such transfonnations can be used for reducing a matrix representation of an operator to a diagonal form. In the new coordinate system, the many-dimensional operator can be written as a sum of one-dimensional operators. [Pg.309]

A linear coordinate transformation may be illustrated by a simple two-dimensional example. The new coordinate system is defined in term of the old by means of a rotation matrix, U. In the general case the U matrix is unitary (complex elements), although for most applications it may be chosen to be orthogonal (real elements). This means that the matrix inverse is given by transposing the complex conjugate, or in the... [Pg.310]

Values of and Qb can be calculated for molecules in the gas phase, given structural and spectroscopic data. The transition state differs from ordinary molecules, however, in one regard. Its motion along the reaction coordinate transforms it into product. This event is irreversible, and as such occurs without restoring force. Therefore, one of the components of Q can be thought of as a vibrational partition function with an extremely low-frequency vibration. The expression for a vibrational partition function in the limit of very low frequency is... [Pg.170]

Asag for the S5mimetric paraboloid is known from Eq. 2. To find Agag over the off-axis aperture a coordinate transformation is performed to shift the center of the coordinate system to the center of the off-axis segment and to scale the off-axis aperture radius to a. Then we have... [Pg.90]

However, it is not proper to apply the regression analysis in the coordinates AH versus AS or AS versus AG , nor to draw lines in these coordinates. The reasons are the same as in Sec. IV.B., and the problem can likewise be treated as a coordinate transformation. Let us denote rcH as the correlation coefficient in the original (statistically correct) coordinates AH versus AG , in which sq and sh are the standard deviations of the two variables from their averages. After transformation to the coordinates TAS versus AG or AH versus TAS , the new correlation coefficients ros and rsH. respectively, are given by the following equations. (The constant T is without effect on the correlation coefficient.)... [Pg.453]

Similar expressions can be derived for second spatial derivatives. The final form of the equations that result after a generalized coordinate transformation depends on the degree of differentiation by using the chain rule, i.e. on the treatment of the metrics x, x, and y. For more details we refer to the... [Pg.382]

The above formulation can be generalized to a general multidimensional case in the form invariant under any coordinate transformation, as was done before for the ground-state case. We consider the general Hamiltonian given by Eq. (32). The formulation can be carried out in the same way as before. The equation for the additional term w is given by... [Pg.132]

For the example in Figure 2.14 it would be possible to perform the coordinate transformation analytically by introducing cylindrical coordinates. However, in general, geometries are too complex to be described by a simple analytical transformation. There are a variety of methods related to numerical curvilinear coordinate transformations relying on ideas of tensor calculus and differential geometry [94]. The fimdamental idea is to establish a numerical relationship between the physical space coordinates and the computational space curvilinear coordinates The local basis vectors of the curvilinear system are then given as... [Pg.162]

See also in sourсe #XX -- [ Pg.6 ]

See also in sourсe #XX -- [ Pg.52 ]

See also in sourсe #XX -- [ Pg.22 , Pg.87 , Pg.398 ]

See also in sourсe #XX -- [ Pg.73 ]

See also in sourсe #XX -- [ Pg.359 ]

See also in sourсe #XX -- [ Pg.36 ]

See also in sourсe #XX -- [ Pg.97 , Pg.289 ]

See also in sourсe #XX -- [ Pg.285 ]

See also in sourсe #XX -- [ Pg.456 ]

See also in sourсe #XX -- [ Pg.312 ]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...