Decomposition of hydrogen peroxide

On the industrial scale oxygen is obtained by the fractional distillation of air. A common laboratory method for the preparation of oxygen is by the decomposition of hydrogen peroxide. H Oj, a reaction catalysed by manganese(IV) oxide ... [Pg.260]

Because the reaction takes place in the Hquid, the amount of Hquid held in the contacting vessel is important, as are the Hquid physical properties such as viscosity, density, and surface tension. These properties affect gas bubble size and therefore phase boundary area and diffusion properties for rate considerations. Chemically, the oxidation rate is also dependent on the concentration of the anthrahydroquinone, the actual oxygen concentration in the Hquid, and the system temperature (64). The oxidation reaction is also exothermic, releasing the remaining 45% of the heat of formation from the elements. Temperature can be controUed by the various options described under hydrogenation. Added heat release can result from decomposition of hydrogen peroxide or direct reaction of H2O2 and hydroquinone (HQ) at a catalytic site (eq. 19). [Pg.476]

Nutrients are usuaUy added at concentrations ranging from 0.005 to 0.02% by weight (16). In a field appHcation using hydrogen peroxide, nutrients were added to the injected water at the foUowing concentrations 380 mg/L ammonium chloride 190 mg/L disodium phosphate, and 190 mg/L potassium phosphate, the latter used primarily to complex with iron in the formation to prevent decomposition of hydrogen peroxide (24). [Pg.171]

Concentration Effects. The reactivity of ethyl alcohol—water mixtures has been correlated with three distinct alcohol concentration ranges (35,36). For example, the chromium trioxide oxidation of ethyl alcohol (37), the catalytic decomposition of hydrogen peroxide (38), and the sensitivities of coUoidal particles to coagulation (39) are characteristic for ethyl alcohol concentrations of 25—30%, 40—60%, and above 60% alcohol, respectively. The effect of various catalysts also differs for different alcohol concentrations (35). [Pg.403]

Decomposition of hydrogen peroxide (H2O2) in aqueous solution with catalase. [Pg.833]

An example of a reaction that is subject to homogeneous catalysis is the decomposition of hydrogen peroxide in aqueous solution ... [Pg.306]

The catalyzed decomposition of hydrogen peroxide is believed to take place by a two-step path ... [Pg.306]

Many reactions that take place slowly under ordinary conditions occur readily in living organisms in the presence of catalysts called enzymes. Enzymes are protein molecules of high molar mass. An example of an enzyme-catalyzed reaction is the decomposition of hydrogen peroxide ... [Pg.306]

Decomposition of Hydrogen Peroxide by Catalysts in Homogeneous Aqueous Solution... [Pg.422]

One of the most used systems involves use of horseradish peroxidase, a 3-diketone (mosl commonly 2,4-pentandione), and hydrogen peroxide." " " Since these enzymes contain iron(II), initiation may involve decomposition of hydrogen peroxide by a redox reaction with formation of hydroxy radicals. However, the proposed initiation mechanism- involves a catalytic cycle with enzyme activation by hydrogen peroxide and oxidation of the [3-diketone to give a species which initiates polymerization. Some influence of the enzyme on tacticity and molecular... [Pg.440]

FIGURE 13.33 A small amount of catalyst—in this case, potassium iodide in aqueous solution—can accelerate the decomposition of hydrogen peroxide to water and oxygen, (a) The slow inflation of the balloon when no catalyst is present, (b) Its rapid inflation when a catalyst is present. [Pg.685]

Enzymes are nature s catalysts. For the moment it is sufficient to consider an enzyme as a large protein, the structure of which results in a very shape-specific active site (Fig. 1.3). Flaving shapes that are optimally suited to guide reactant molecules (usually referred to as substrates) in the optimum configuration for reaction, enzymes are highly specific and efficient catalysts. For example, the enzyme catalase catalyzes the decomposition of hydrogen peroxide into water and oxygen... [Pg.6]

It was found that the value of F, is markedly increased by ions which are effective catalysts of oxidation reactions of peroxydisulphate. These are silver(I) copper(n), and iron(III). Cobalt(II) and nickel(II) ions, although they are good catalysts for the decomposition of hydrogen peroxide, exert their effect merely as inert electrolytes in the induced reaction. Therefore it can be concluded that, in this process, activation of the rather less reactive 8203 is more important than that of hydrogen peroxide . ... [Pg.562]

Induced decomposition of hydrogen peroxide can be interpreted as follows. The HO2 radical formed in reaction (91) reduces OSO4, which will be re-oxidised... [Pg.563]

Carbon provokes violent or even explosive decomposition of hydrogen peroxide. However, the real cause of this may be linked to the presence of metallic impurities in carbon. [Pg.165]

Metal catalyses the explosive decomposition of hydrogen peroxide. [Pg.176]

This oxide catalyses the violent or even explosive decomposition of hydrogen peroxide. This reaction explains the numerous accidents mentioned involving the contact of hydrogen peroxide with rusted iron. Two accidents of this nature dealt with mixtures of hydrogen peroxide with ammonia and an alkaline hydroxide The detonations took place after a period of induction of respectively several hours and four minutes. Iron (III) oxide also catalyses the explosive decomposition of calcium hypochlorite. [Pg.204]

Cobalt (II, CoO) and (111, C02O3) oxides catalyse the explosive decomposition of hydrogen peroxide. [Pg.205]

Nickei powder gives rise to dangerous reactions, which has led to accidents with potassium perchlorate (ignition), with chlorine at 600°C (ignition) and with ammonium nitrate at about 200°C (detonation). It catalyses the explosive decomposition of hydrogen peroxide. [Pg.206]

Lead oxide reacts violently with numerous metals such as sodium powder (immediate ignition), aluminium (thermite reaction, which is often explosive), zirconium (detonation), titanium, some metalloids, boron (incandescence by heating), boron-silicon or boron-aluminium mixtures (detonation in the last two cases). Finally, silicon gives rise to a violent reaction unless it is combined with aluminium (violent detonation). It also catalyses the explosive decomposition of hydrogen peroxide. [Pg.232]

Figure 10.25 Effect of phosphate stabiliser on Fe(m)-catalysed decomposition of hydrogen peroxide in absence of substrate [237]. Initial concentration 2.9 g/l H202, Phosphonate stabiliser 2 g/l, 95 °C, pH 12...

Figure 10.27 Effect of sequestering agent concentration on the decomposition of hydrogen peroxide and degree of polymerisation of cotton cellulose [236]...

Certain metal salts effectively reduce the photoactivity of titanium dioxide pigments. Combination of these salts with an appropriate antioxidant and/or ultraviolet stabilizer provided highly efficient stabilization of polypropylene. The deactivation/ stabilization performance of the metal salts is adequately explained on the basis of their decomposition of hydrogen peroxide at the pigment surface and by annihilation of positive holes in the pigment crystal lattice. [Pg.161]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...