Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Formamide, dimethyl

DMF, Me2NC(0)H. Dimethyl formamide. DMSO, Mc2SO. Dimethyl sulphoxide. [Pg.145]

Dimeihylamine, C2H7N, (CH3)2NH. Colourless, inflammable liquid with an ammoniacal odour, mp -96" C, b.p. 7°C. Occurs naturally in herring brine. Prepared in the laboratory by treating nitrosodimetbyl-aniline with a hot solution of sodium hydroxide. Dimethylamine is largely used in the manufacture of other chemicals. These include the solvents dimethylacetamide and dimethyl-formamide, the rocket propellant unsym-metrical dimethylhydrazine, surface-active agents, herbicides, fungicides and rubber accelerators. [Pg.260]

Vilsmeier reagent The reagent obtained from POCI3 mixed with either N,N-dimethyl-formamide or N-methylformanilide. Used for introducing the methanoyl (formyl) (-CHO) group into activated aromatic substrates. [Pg.419]

HC0N(CH3)2, also possess exceptional solvent properties. The alkyl-glycols, dioxan and dimethyl-formamide should be used with caution, however, as their hot vapours are poisonous. [Pg.15]

The 2-[2-thienyl]selenazole is formylated in the 5-position by action of n-butyllithium. dimethyl formamide. and hydrolysis (106). [Pg.239]

THF, tetrahydrofuran DMSO. dimethylsulfoxide TEA, triethylamine DMF. dimethyl-formamid. [Pg.73]

The intrinsic viscosity of poly(7-benzyl-L-glutamate) (Mq = 219) shows such a strong molecular weight dependence in dimethyl formamide that the polymer was suspected to exist as a helix which approximates a prolate ellipsoid of revolution in its hydrodynamic behaviorf ... [Pg.652]

Poly(7-benzyl-L-glutamate) is known to possess a helical structure in certain solvents. As part of an investigationf of this molecule, a fractionated sample was examined in chloroform (CHCI3) and chloroform saturated ( 0.5%) with dimethyl formamide (DMF). The following results were obtained ... [Pg.708]

In the examples, a nitro group is substituted for a hydrogen atom, and water is a by-product. Nitro groups may, however, be substituted for other atoms or groups of atoms. In Victor Meyer reactions which use silver nitrite, the nitro group replaces a hahde atom, eg, I or Br. In a modification of this method, sodium nitrite dissolved in dimethyl formamide or other suitable solvent is used instead of silver nitrite (1). Nitro compounds can also be produced by addition reactions, eg, the reaction of nitric acid or nitrogen dioxide with unsaturated compounds such as olefins or acetylenes. [Pg.32]

The physical properties of finish removers vary considerably due to the diverse uses and requirements of the removers. Finish removers can be grouped by the principal ingredient of the formula, method of appHcation, method of removal, chemical base, viscosity, or hazardous classification. Except for method of apphcation, a paint remover formulation usually has one aspect of each group, by which it can be used for one or more appHcations. A Hst of the most common organic solvents used in finish removers has been compiled (3). Many are mentioned throughout this article others include ethyl lactate [97-64-3] propylene carbonate [108-32-7] furfural alcohol [98-01-1/, dimethyl formamide [68-12-2] tetrahydrofuran [109-99-9] methyl amyl ketone [110-43-0] dipropylene glycol methyl ether [34590-94-8] and Exxate 600, a trade name of Exxon Chemicals. [Pg.550]

V,/V-dimethy1-form amide [68-12-2] dimethyl formamide C3H2ON 24.7... [Pg.270]

Eig. 7. CycHc voltammograms for the reduction of 1.0 mAf [2,2 -ethylene-bis(nitrilomethyHdyne)diphenolato]nickel(II) in dimethyl formamide at a glassy carbon electrode, in A, the absence, and B and C the presence of 2.0 and 5.0 mAf 6-iodo-l-phenyl-l-hexyne, respectively (14). [Pg.54]

Amino-pyridazines and -pyridazinones react with monomethyl- or iV,A-dimethyl-formamide and other aliphatic amides in the presence of phosphorus trichloride, thionyl chloride, phosgene or benzenesuUonyl chloride to give mono- or di-alkylaminomethyl-eneamino derivatives. The same compounds can be prepared conveniently with A,iV-dimethylformamide dimethyl acetal in high yield (Scheme 50). [Pg.35]

Dimethyl formamide with cyclohexane or petroleum ether. [Pg.30]

Petroleum ether with aniline, benzyl alcohol, dimethyl formamide, dimethyl sulfoxide, formamide, furfuryl alcohol, phenol or water. [Pg.30]

Dimethyl formamide with benzene, ethanol or ether. [Pg.37]

Organic salts (e.g. trimethylammonium benzoate) are usually purified by recrystallisation from polar solvents (e.g. water, ethanol or dimethyl formamide). If the salt is too soluble in a polar solvent, its concentrated solution should be treated dropwise with a miscible nonpolar, or less polar, solvent (see Table 8, Chapter 1) until crystallisation begins. [Pg.68]

The commercial polymers are generally resistant to aqueous acids and alkalis although they are attacked by concentrated sulphuric acid. As might be expected of a highly polar polymer it is not dissolved by aliphatic hydrocarbons but solvents include dimethyl formamide and dimethyl acetamide. [Pg.600]

A. p-Xylylene-bis(lriphenylphosphonium chloride). A mixture of 262 g. (1.0 mole) of triphenylphosphine (Note 1) and 84 g. (0.48 mole) of J)-xylylene dichloride (Note 2) in 1 1. of dimethyl-formamide is heated at reflux with stirring for 3 hours (Note 3). The mixture is then allowed to cool to room temperature with stirring, and the white crystalline solid is collected, washed with 100 ml. of dimethylformamidc followed by 300 ml. of ether, and... [Pg.85]

The product can be recrystallized readily from dimethyl-formamide to give yellow leaflets, m.p. 290-293°. However, it is pure enough to be used in the next step. This synthesis has also been applied to the preparation of l,4-bis-[4-( -tolyl)buta-dienyljbenzene (100%), l,4-bis-[4-(3-nitrophenyl)butadienyl]-benzene (56%), and l,4-bis-(3-methyl-4-phenylbutadienyl)ben-zene (87%). [Pg.87]

Dimethyl butyl acetate (sec-hexyl acetate) Dimethyl formamide... [Pg.367]

One approach is to uses solvent extraction with dimethyl formamide (DMF) to remove Cj acetylene and a C, acetylene-propadiene mixture from their steam cracked ethylene and propylene streams. The simple acetylene is sold as welding gas, and the C, stream is sold as starting material for chemical synthesis. [Pg.110]

A condensible blowdown tank, designed on a similar basis to that described above for phenol, may be provided in other services where a conventional condensible blowdown drum would not be acceptable (e.g., due to effluent water pollution considerations). Examples of such cases are methyl ethyl ketone (MEK) and dimethyl formamide (DMF). A suitable absorbing material is specified (e.g., a lube oil stock for MEK water for DMF), and the design must include consideration of maximum permissible operating temperatures to prevent excessive vapor evolution or the boiling of water. [Pg.239]

A mixture of 3.18 g (10 mmoles) of 17 -hydroxy-2-hydroxymethylene-5a-androstan-3-one, 20 ml dry dimethyl formamide and 0.3 g (13 mmoles) of sodium hydride is stirred for 0.5 hr at room temperature under nitrogen. A total of 1.51 g (12.5 mmoles) of redistilled allyl bromide is added and the mixture is stirred for 1 hr on the steam bath. Aqueous potassium hydroxide (2 g in 5 ml of water) is added and stirring is continued for 1 hr on the steam bath. The reaction mixture is diluted with 50 ml of methylene dichloride followed by careful addition of 300 ml of water. The organic phase is separated and the aqueous phase is again extracted with 50 ml of methylene dichloride. The combined extracts are washed with water, dried over sodium sulfate, filtered and chromatographed on 200 g of silica gel. Elution with pentane-ether (4 1) provides 2a-allyl-17j -hydroxy-5a-androstan-3-one 0.85 g (26%) mp 118-119° [aj 14° (CHCI3), after crystallization from ether-hexane. [Pg.95]

Dehydrochlorination of bis(tnfluoromethylthio)acetyl chloride with calcium oxide gives bis(trifluoromethylthio)ketene [5] (equation 6) Elimination of hydrogen chloride or hydrogen bromide by means of tetrabutylammonium or potassium fluoride from vinylic chlorides or bromides leads to acetylenes or allenes [6 (equation 7) Addition of dicyclohexyl-18-crown-6 ether raises the yields of potassium fluoride-promoted elimination of hydrogen bromide from (Z)-P-bromo-p-ni-trostyrene in acetonitrile from 0 to 53-71 % In dimethyl formamide, yields increase from 28-35% to 58-68%... [Pg.889]

Select mobile phases for HPSEC based on their ability to dissolve the sample and their compatibility with the column. Zorbax PSM columns are compatible with a wide variety of organic and aqueous mobile phases (Table 3.4), but analysts should avoid aqueous mobile phases with a pH greater than 8.5. As mentioned earlier, select mobile phases that minimize adsorption between samples and silica-based packings. Sample elution from the column after the permeation volume indicates that adsorption has occurred. If adsorption is observed or suspected, select a mobile phase that will be more strongly adsorbed onto the silica surface than the sample. For example, N,N-dimethyl-formamide (DMF) is often used for polyurethanes and polyacrylonitrile because it eliminates adsorption and dissolves the polymers. When aqueous mobile phases are required, highly polar macromolecules such as Carbowax can be used to coat the silica surface and eliminate adsorption. Table 3.5 provides a list of recommended mobile-phase conditions for some common polymers. [Pg.82]

See other pages where Formamide, dimethyl is mentioned: [Pg.171]    [Pg.629]    [Pg.359]    [Pg.159]    [Pg.605]    [Pg.261]    [Pg.145]    [Pg.512]    [Pg.126]    [Pg.169]    [Pg.94]    [Pg.141]    [Pg.67]    [Pg.37]    [Pg.63]    [Pg.62]    [Pg.70]    [Pg.208]    [Pg.1029]    [Pg.328]    [Pg.199]    [Pg.31]   
See also in sourсe #XX -- [ Pg.191 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.478 ]

See also in sourсe #XX -- [ Pg.77 , Pg.82 , Pg.96 , Pg.135 ]

See also in sourсe #XX -- [ Pg.306 ]

See also in sourсe #XX -- [ Pg.295 ]

See also in sourсe #XX -- [ Pg.304 , Pg.373 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.10 ]

See also in sourсe #XX -- [ Pg.438 ]

See also in sourсe #XX -- [ Pg.232 ]

See also in sourсe #XX -- [ Pg.517 ]

See also in sourсe #XX -- [ Pg.374 ]

See also in sourсe #XX -- [ Pg.118 ]

See also in sourсe #XX -- [ Pg.3 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.418 ]

See also in sourсe #XX -- [ Pg.92 ]

See also in sourсe #XX -- [ Pg.238 ]

See also in sourсe #XX -- [ Pg.27 , Pg.33 ]

See also in sourсe #XX -- [ Pg.190 ]

See also in sourсe #XX -- [ Pg.115 ]

See also in sourсe #XX -- [ Pg.321 ]

See also in sourсe #XX -- [ Pg.9 , Pg.56 , Pg.203 ]

See also in sourсe #XX -- [ Pg.12 , Pg.815 ]

See also in sourсe #XX -- [ Pg.307 ]

See also in sourсe #XX -- [ Pg.212 ]

See also in sourсe #XX -- [ Pg.536 ]

See also in sourсe #XX -- [ Pg.67 ]

See also in sourсe #XX -- [ Pg.209 ]

See also in sourсe #XX -- [ Pg.114 ]

See also in sourсe #XX -- [ Pg.184 ]

See also in sourсe #XX -- [ Pg.74 ]

See also in sourсe #XX -- [ Pg.286 ]

See also in sourсe #XX -- [ Pg.461 , Pg.462 ]

See also in sourсe #XX -- [ Pg.546 ]

See also in sourсe #XX -- [ Pg.152 ]

See also in sourсe #XX -- [ Pg.171 , Pg.366 ]

See also in sourсe #XX -- [ Pg.41 , Pg.50 , Pg.203 , Pg.204 , Pg.206 , Pg.207 ]

See also in sourсe #XX -- [ Pg.50 , Pg.60 , Pg.143 , Pg.144 ]

See also in sourсe #XX -- [ Pg.97 ]

See also in sourсe #XX -- [ Pg.500 ]

See also in sourсe #XX -- [ Pg.52 ]

See also in sourсe #XX -- [ Pg.237 ]

See also in sourсe #XX -- [ Pg.331 ]

See also in sourсe #XX -- [ Pg.390 ]

See also in sourсe #XX -- [ Pg.272 ]



SEARCH



Carbonylation dimethyl formamide

Chemical synthesis dimethyl formamide

DMF—See Dimethyl formamide

Dimethyl formamide , molecular

Dimethyl formamide adduct

Dimethyl formamide chemistry

Dimethyl formamide derivatives

Dimethyl formamide solubility parameter

Dimethyl formamide toxicity

Dimethyl formamide viscosity

Dimethyl-formamide DMF

Formamid

Formamidate

Formamide

Formamide, dimethyl-, compound with

Formamides

Hydroxyl reaction with dimethyl formamide

Organic solvents dimethyl formamide

Organic solvents effect dimethyl formamide

Solvents dimethyl formamide

© 2024 chempedia.info