Gas sensing electrodes

Gas-sensing electrodes have been developed for a variety of gases, the characteristics for which are listed in Table 11.4. The composition of the inner solution changes with use, and both it and the membrane must be replaced periodically. Gas-sensing electrodes are stored in a solution similar to the internal solution to minimize their exposure to atmospheric gases. [Pg.484]

Potcntiomctric Biosensors Potentiometric electrodes for the analysis of molecules of biochemical importance can be constructed in a fashion similar to that used for gas-sensing electrodes. The most common class of potentiometric biosensors are the so-called enzyme electrodes, in which an enzyme is trapped or immobilized at the surface of an ion-selective electrode. Reaction of the analyte with the enzyme produces a product whose concentration is monitored by the ion-selective electrode. Potentiometric biosensors have also been designed around other biologically active species, including antibodies, bacterial particles, tissue, and hormone receptors. [Pg.484]

Few potentiometric biosensors are commercially available. As shown in Figures 11.16 and 11.17, however, available ion-selective and gas-sensing electrodes may be easily converted into biosensors. Several representative examples are described in Table 11.5, and additional examples can be found in several reviews listed in the suggested readings at the end of the chapter. [Pg.485]

Potentiometric electrodes also can be designed to respond to molecules by incorporating a reaction producing an ion whose concentration can be determined using a traditional ion-selective electrode. Gas-sensing electrodes, for example, include a gas-permeable membrane that isolates the ion-selective electrode from the solution containing the analyte. Diffusion of a dissolved gas across the membrane alters the composition of the inner solution in a manner that can be followed with an ion-selective electrode. Enzyme electrodes operate in the same way. [Pg.532]

Biocatalytic membrane electrodes have an ISE or a gas sensing electrode in contact with a thin layer of biocatalytic material, which can be an immobilized enzyme, bacterial particles or a tissue slice, as shown in Fig. 3 The biocatalyst converts substrate (the analyte) into product, which is measured by the electrode. Electrodes of this type are often referred to as biosensors . [Pg.7]

Conventional ion-selective electrodes have been used as detectors for immunoassays. Antibody binding measurements can be made with hapten-selective electrodes such as the trimethylphenylammonium ion electrode Enzyme immunoassays in which the enzyme label catalyzes the production of a product that is detected by an ion-selective or gas-sensing electrode take advantage of the amplification effect of enzyme catalysis in order to reach lower detection limits. Systems for hepatitis B surface antigen and estradiol use horseradish peroxidase as the enzyme label and... [Pg.15]

Foil of PTFE or polythene Chemical reagent + glass membrane Gas-sensing electrode H+ (or OH -) as an indirect measure of NH3, S02, nitrous vapours, H2S, HCN, CMXa), C02... [Pg.72]

Gas-sensing electrodes. A gas-sensing electrode consists of a combination electrode that is normally used to detect a gas in its solution by immersion. The sensor contains the inner sensing element, usually a glass electrode or another ISE, and around this a layer of a 0.1 Af electrolyte, surrounded by a gas-permeable membrane. On immersion of the sensor this membrane contacts the solution of the gas which diffuses through it until an overall equilibrium is established, i.e., the partial pressure of the gas attains an equilibrium between sample solution and membrane and between membrane and sensor electrolyte. For a better understanding of the interaction between this electrolyte and the... [Pg.84]

Orion Model 95-64). In practice, one simply determines E ntot by calibration with a standard solution without the necessity of knowing the various constants mentioned. The S02 electrode allows the determination of concentrations down to 10 8 Af with a response time of a few minutes. From the above it appears that the gas-sensing electrodes show Nemstian behaviour provided that the concentrations to be measured are not high there is little or no interference by other components in the sample solution. [Pg.86]

Neither the usual membrane ISEs nor the gas-sensing electrodes, in which their internal indicator electrode functions as a zero-current potentiometric half-cell, are under consideration here. [Pg.369]

D.L. Simpson and R.K. Kobos, Potentiometric microbiological assay of gentamicin, streptomycin, and neomycin with a carbon dioxide gas-sensing electrode. Anal. Chem. 55, 1974-1977 (1983). [Pg.279]

Besides, potentiometric sensors with ion-selective ionophores in modified poly(vinyl chloride) (PVC) have been used to detect analytes from human serum [128], Cellular respiration and acidification due to the activity of the cells has been measured with CMOS ISFETS [129], Some potentiometric methods employ gas-sensing electrodes for NH3 (for deaminase reactions) and C02 (for decarboxylase reactions). Ion-selective electrodes have also been used to quantitate penicillin, since the penicillinase reaction may be mediated with I or GST. [Pg.382]

Schematic diagram of a gas-sensing electrode. Selective ion electrode is shown as a glass electrode. The reference electrode is an Ag-AgCl electrode. Other electrode combinations are possible.

Gas-sensing electrodes differ from ion-selective electrodes in that no species in solution can interfere with the electrode response as only gases can diffuse through the membrane. However, it should be noted that any gas which causes a pH change in the internal electrolyte solution will affect electrode response. [Pg.242]

There are three concerns in using gas sensing electrodes in soil (1) some electrodes have membranes that have a limited shelf life and must be changed regularly (2) the membrane is relatively delicate, so electrodes must be placed in soil carefully and cannot be subject to movement and (3) many membranes must be kept moist to function properly, and thus they cannot be used in dry soils or situations where the soil may dry out during measurement [7],... [Pg.203]

Crystalline membrane electrodes, and (iv) Gas-sensing electrodes, which will be described below briefly ... [Pg.244]

The schematic diagram of a gas-sensing electrode is illustrated in Figure 16.8, that comprises of essentially a reference electrode (E), a specific-ion electrode (B), and an internal electrolyte solution (F) contained in a cylindrical plastic tube (G). One end of the plastic tubing is provided with a thin, replaceable, gas-permeable membrane that separates the internal electrolyte solution from the external solution containing gaseous analyte. However, the exact composition and specifications of this gas-permeable membrane is usually described by its respective manufacturers. It is normally made up of a thin microporous film fabricated from a hydrophobic plastic material. [Pg.247]

Selectivity of Gas-sensing Electrode The selectivity of the gas-sensing electrode may be enhanced by making use of such an internal electrode which is particularly sensitive enough to certain species other than the H+ ion. [Pg.248]

These measure the potential difference between the transducing electrode and a reference electrode under conditions of zero current. Three types of potentiometric detectors are commonly employed ion-selective electrodes (ISE), gas-sensing electrodes and field effect transistors (FET). [Pg.193]

Optimized steam requirement is relatively insensitive to solution pH. Solution capacity for SO2 absorption can reasonably vary from 0.1 to 0.4 g-moles S02/liter. The SO2 gas sensing electrode is an effective tool for vapor/liquid equilibrium at room temperature. [Pg.289]

Membrane electrodes used to measure species such as NHj that are in equilibrium with the gaseous form (i.e., NH-,) in solution are known as gas-sensing electrodes. In this case, the solution to be analyzed is separated from the analyzing solution by a gas-permeable membrane. The gas in the solution to be analyzed diffuses through the membrane and changes the pH of the internal solution, which is monitored using a standard glass electrode. [Pg.623]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...