High-current

H0S(0)200S(0)20H. Dibasic acid formed as salts by electrolysis of sulphates at low temperatures and high current density. The acid and persulphates are strong oxidizing agents ( "[S20a] to S04 -t-2 01 volts in acid) but the reactions are often slow. Compare permonosulphuric acid. [Pg.301]

During many years in Scientific Research Institutes of Nuclear Physics and Introscopy at Tomsk Polytechnical University (TPU) researches into induction electron accelerators and their uses for non-destructive radiation quality control of materials and articles have been conducted. Control sensitivity and efficiency detection experimental researches have been conducted with the high-current stereo-betatron modifications [1], and KBC-25 M and BC-50 high-current betatrons [2,3] in range of 11 MeV and 25-50 MeV radiation energy. [Pg.513]

Because of the large thickness x-rayed by high-current betatron (more than 1500 ram on plastic) the picture of defect situated near the front wall of the sample is too increased what makes difficult to detect in practice real dimensions of the defect. But there is a possibility of stereosurvey due to existence of two radiation beams simultaneously generated by betatron. [Pg.514]

Researches on detection of sensitivity and control efficiency with high-current betatron modifications KEC-25 and EC-50 were conducted in radiation energy range of 25-45 MeV. [Pg.514]

Transportable high-current KEC-25M betatron on 25 MeV energy with power dose of radiation on 1 m away from the target of 30 Gr/min is the source of penetrating radiation intended for flaw detection in field conditions and radiation visualization of dynamic processes [2]. [Pg.514]

High-current EC-50 betatron with maximal energy of accelerated electrons equaled to 50 MeV and radiation dose power 220 Gr/min on the distance of Im from the target [3] was made for experimental physical researches and activated analysis. [Pg.514]

High-current betatrons experiments confirm the wide practical possibilities of use of these installations for radiative control of the articles and materials with big thickness. [Pg.515]

Ozone is formed in certain chemical reactions, including the action of fluorine on water (p. 323) and the thermal decomposition ofiodic(VII) (periodic) acid. It is also formed when dilute (about 1 M) sulphuric acid is electrolysed at high current density at low temperatures the oxygen evolved at the anode can contain as much as 30% ozone. [Pg.263]

These ion lasers are very inefficient, partly because energy is required first to ionize the atom and then to produce the population inversion. This inefficiency leads to a serious problem of heat dissipation, which is partly solved by using a plasma tube, in which a low-voltage high-current discharge is created in the Ar or Kr gas, made from beryllium oxide, BeO, which is an efficient heat conductor. Water cooling of the tube is also necessary. [Pg.354]

The Fe, Co, and Ni deposits are extremely fine grained at high current density and pH. Electroless nickel, cobalt, and nickel—cobalt alloy plating from fluoroborate-containing baths yields a deposit of superior corrosion resistance, low stress, and excellent hardenabiUty (114). Lead is plated alone or ia combination with tin, iadium, and antimony (115). Sound iasulators are made as lead—plastic laminates by electrolyticaHy coating Pb from a fluoroborate bath to 0.5 mm on a copper-coated nylon or polypropylene film (116) (see Insulation, acoustic). Steel plates can be simultaneously electrocoated with lead and poly(tetrafluoroethylene) (117). Solder is plated ia solutioas containing Pb(Bp4)2 and Sn(Bp4)2 thus the lustrous solder-plated object is coated with a Pb—Sn alloy (118). [Pg.168]

The blue-emitting component of most television screens and computer terminals is another sulfide, ZnS Ag,Al. Although rare-earth activated blue-emitting phosphors ZnS Tm " and Sr (P0 2d-Eu (30) have also been evaluated for this appHcation, the search for a good blue phosphor that does not saturate at high current densities and maintains weU continues. [Pg.292]

The means by which high current densities are obtained can be understood from an examination of the electrolyte conductivity and the interelectrode gap width. These parameters are related to the current through Ohm s law, which states that the current I fiowing in a conductor of resistance Ris directly proportional to the appHed voltage IN... [Pg.306]

The anodes can be made of graphite which tolerates high current densities without passivation, but are subject to gradual corrosive attack causing a... [Pg.513]

Arc melting also can be used to consoHdate bars of metal that are pressed from powder or sponge and used as consumable electrodes in a low voltage, high current arc. The bar is suspended vertically and the molten metal falls from the bottom of the bar onto a water-cooled copper cmcible, from which it is removed as an ingot. [Pg.23]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...