Blends high-density polyethylene

Akhtar has studied the morphology and physical properties of NR and high-density polyethylene blends prepared in Brabender plasticorder at 150°C at a rotor speed of 60 rpm [53]. Films were molded between two chromium plates at a pressure of 0.34 MPa. The films along with mold were... [Pg.339]

Similar results are also obtained from the CNT-filled polymer blends such as CNT-filled polyethylene terephthalate (PET)/polyvinylidene fluoride, PET/nylon 6,6, PET/polypropylene, and PET/high-density polyethylene blends. [Pg.197]

V(L)Cl2(TpMs )] (L = N Bu L = O) were in situ supported onto SiC>2 and onto MAO and trimethylaluminum. All catalyst systems were shown to be active in ethylene polymerization. The systems were stable at different [A1]/[V] molar ratios and polymerization temperatures.21 Branched polyethylene/high-density polyethylene blends were prepared using the combined [NiChfa-diimine)] and V(T(Tp-vls )(N Bu) catalysts. The polymerization reactions were performed in hexane or toluene at three different polymerization temperatures (CPC, 30°C and 50°C) and several nickel molar fractions, using MAO as cocatalyst.22 TpMs- and TpMs -imido vanadium (V) were immobilized onto a series of inorganic supports All the systems were shown to be active in ethylene polymerization in the presence of MAO or TiBA/MAO mixture.23... [Pg.443]

Polyvinylidene Fluoride or High Density Polyethylene Blends, LCP/PVDF or HDPE... [Pg.843]

N.K. Madi, Thermal and mechanical properties of injection molded recycled high density polyethylene blends with virgin isotactic polypropylene. Mater. Des. 46, 435-441 (2013)... [Pg.151]

A. Argoud, L. Trouillet-Eonti, S. Ceccia, P. Sotta, Morphologies in polyamide 6/high density polyethylene blends with high amounts of reactive compatibilizer. Eur. Polymer J. 50, 177-189 (2014)... [Pg.152]

S. Mallick, B.B. Khatua, Morphology and properties of nylon6 and high density polyethylene blends in absence and presence of nanoclay. J. Appl. Polym. Sd. 121, 359-368 (2011)... [Pg.152]

S. Charoenpongpool, M. Nithitanakul, B.P. Grady, Melt-neutralization of maleic anhydride grafted on high-density polyethylene compatibilizer for polyamide-6/high-density polyethylene blend effect of neutralization level on compatibility of the blend. Polym. Bull. 70, 293-309 (2013)... [Pg.152]

E. Elshereafy, M.A. Mohamed, M.M. EL-Zayat, A.A. El Miligy. Gamma radiation curing of nitrile rubber/high density polyethylene blends. J. Radioanal. Nucl. Chem. 293, 941-947 (2012)... [Pg.153]

Monika, P. Upadhyaya, N. Chand, Vi Kumar, Effect of poly lactic acid on morphological, mechanical, and optical properties of compatibilized polypropylene and high density polyethylene blend. Compos. Interfaces 21, 133-141 (2014)... [Pg.154]

Journal of Polymer Science Polymer Physics Edition 31, No. 12, Nov. 1993, p.l769-77 DYNAMIC RHEO-OPTICAL CHARACTERISATION OF A LOW DENSITY POLYETHYLENE/PERDEUTERATED HIGH DENSITY POLYETHYLENE BLEND BY TWO DIMENSIONAL STEP-SCAN FTIR SPECTROSCOPY... [Pg.116]

S. MaUick, A.K. Dhibar, B.B. Khatua, Effect of nanoclay on the morphology and properties of poly(methyl methacrylate)/high-density polyethylene blends. Journal of Applied Polymer Science 116 (2) (2010) 1010-1020. [Pg.49]

Padilla-Lopez H, Vazquez M 0, Gonzalez-Nunez R and Rodrigue D (2003) Influence of postextrusion parameters on the final morphology of polystyrene/high density polyethylene blends, Polym Eng i cf 43 1646-1656. [Pg.397]

Jiang C H, Zhong G J and Li Z M (2007) Recyclability of in situ microfibrillar poly(ethylene terephthalate)/high-density polyethylene blends, Macromol Mater Eng 292 362-372. [Pg.436]

Jose S, Aprem A S, Francis B, Chandy M G, Werner P, Alstaedt V and Thomas S (2004) Phase morphology, crystallisation behaviour and mechanical properties of isotactic polypropylene/high density polyethylene blends, Eur Polym J 40 2105-2115. [Pg.560]

Liang S, Wang K, Tang C, Zhang Q, Du R and Fu Q (2008) Unexpected molecular weight dependence of shish kebab structure in the oriented linear low density polyethylene/high density polyethylene blends, J Chem Phys 128 174902. [Pg.768]

M. Palabiyik,S. Bahadur (2002) THbological studies of polyamide 6 and high density polyethylene blends filled with PTFE and copper oxide and reinforced with short glass fibers. Wear 253, 369. [Pg.187]

Dhibar AK, Kim JK, Khatua BB. Co-continuous phase morphology of asymmetric compositions of polypropylene/high-density polyethylene blend by the addition of clay. J Appl Polym Sci 2011 119(5) 3080-92. [Pg.383]

Journal of Applied Polymer Science 82, No.6, 7th Nov.2001, p. 13 82-90 PROPERTIES AND MORPHOLOGY OF POLY(ETHYLENE TEREPHTHALATE) AND HIGH-DENSITY POLYETHYLENE BLEND Guerrero C Lozano T Gonzalez V Arroyo E Nuevo Leon,Universidad Autonoma... [Pg.61]

Kojima M, Satake H (1984) Morphological and structural features of heat-treated drawn polypropylene/high-density polyethylene blends. J Polym Sci Polym Phys Ed 22(2) 285-294... [Pg.248]

Novel olefin block copolymers synthesized via catalytic block technology were evaluated for polyolefin blend compatibilization. It was found that OBC is an effective polyolefin blend compatibilizer for polypropylene-high density polyethylene blend. Significant improvements in mechanical properties were observed. Morphology showed that OBC compatibilized blends displayed reduction in phase size. Cryo-fractured surface analysis and adhesion data from microlayered tapes with OBC as tie layers suggested improved interfacial adhesion for OBC compatibilized blends. [Pg.804]

Polystyrene/High-Density Polyethylene Blends by Styrene/Ethylene-Butylene/Styrene Block Copolymer, Journal of Applied Polymer Science, 91, 742-755 (2004). [Pg.1217]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...