High density polyethylene correspondence

Hydrogenation pyrolysis has been applied to the determination of the composition of copolymers of a-olefins, the sequence of monomer units and the manner in which they are added (head-to-head and head-to-tail) [253]. Mikhailov et al. [251] used Py—GC to investigate the structure of low- and high-density polyethylenes and copolymers of ethylene with propylene. The pyrolysis products were hydrogenated. The method made it possible to examine alkanes up to Cjo, which facilitates the investigation of the polymer chain structure. The isoalkanes identified corresponded to the branched polyethylene structure. It has been established that the ethyl and butyl side-chains occur most frequently in polyethylenes. [Pg.130]

Miller et al. have recently reported infra-red dichroic data obtained for high density polyethylene crystallised under the orientation and pressure effects of a pressure capillary viscometer. Their data for a number of crystalline bands (including the 1894 cm" absorption) showed that the crystal c-axes were almost perfectly oriented (f 1) in the initial extrusion direction. The amorphous orientation functions were generally lower, but corresponded to an extension ratio between 2 and 7 when compared with the above results of Read and Stein and of Glenz and Peterlin. Further evidence was also obtained for the relatively high orientation of the amorphous component of the 2016 cm" band (U = 0-66-0-72). [Pg.180]

In Section 24.1.3 we have discussed among others the time-temperature correspondence principle. An example of application of that principle is shown in Fig. 24.10. The results pertain to high density polyethylene (HOPE) subjected to different levels of predrawing [58]. The draw ratio is defined as... [Pg.432]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...