Importing data

This first information about the reservoir is recorded, as a function of depth, in the form of several columns. Although rather qualitative in many respects, mudlogging is an important data gathering technique. It is of importance as a basis for operational decisions, e.g. at what depth to set casing, or where to core a well. Mudlogging is also cheap, as data is gathered while the normal drilling operations go on. [Pg.25]

Vibrational spectroscopy has been, and will continue to be, one of the most important teclmiques in physical chemistry. In fact, the vibrational absorption of a single acetylene molecule on a Cu(lOO) surface was recently reported [ ]. Its endurance is due to the fact that it provides detailed infonnation on structure, dynamics and enviromnent. It is employed in a wide variety of circumstances, from routine analytical applications, to identifying novel (often transient) species, to providing some of the most important data for advancing the understanding of intramolecular and intemiolecular interactions. [Pg.1175]

The JCAMP-DX file format is split into the sections CORE and NOTES with the intention of keeping less important data separated from the essential content. The CORE itself contains CORE HEADER and CORE DATA. NOTES are just between HEADER and DATA (see Figure 4-4 for an example). [Pg.210]

A very important data mining task is the discovery of characteristic descriptions for subsets of data, which characterize its members and distinguish it from other subsets. Descriptions can, for example, be the output of statistical methods like average or variance. [Pg.474]

The steps (reactions) by which normal ions fragment are important pieces of information that are lacking in a normal mass spectrum. These fragmentation reactions can be deduced by observations on metastable ions to obtain important data on molecular structure, the complexities of mixtures, and the presence of trace impurities. [Pg.231]

Two further expressions are used in discussions on isotope ratios. These are the atom% and the atom% excess, which are defined in Figure 48.6 and are related to abundance ratios R. It has been recommended that these definitions and some similar ones should be used routinely so as to conform with the system of international units (SI). While these proposals will almost certainly be accepted by mass spectrometrists, their adoption will still leave important data in the present format. Therefore, in this chapter, the current widely used methods for comparison of isotope ratios are fully described. The recommended Sl-compatible units such as atom% excess are introduced where necessary. [Pg.361]

Piers Import Data Journal of Commerce, New York, 1992. [Pg.529]

Derivatives. The most important data for 2-methyl a siridine and 1-(2-hydroxyethy1)asiridine, which previously had some industrial significance, are given in Table 1. Like ethyleneimine, these compounds ate used in polymer form and as intermediates. The use of activated asiridines, eg, /V-acylasiridines, for amino ethylation, under alkaline conditions, is of preparative interest (1). [Pg.14]

A development in the 1960s was that of on-line elemental analysis of slurries using x-ray fluorescence. These have become the industry standard. Both in-stream probes and centralized analyzers are available. The latter is used in large-scale operations. The success of the analyzer depends on how representative the sample is and how accurate the caUbration standards are. Neutron activation analyzers are also available (45,51). These are especially suitable for light element analysis. On-stream analyzers are used extensively in base metal flotation plants as well as in coal plants for ash analysis. Although elemental analysis provides important data, it does not provide information on mineral composition which is most cmcial for all separation processes. Devices that can give mineral composition are under development. [Pg.417]

Wea.ther lbillty. One of the more destmctive elements is exposure to sunlight specifically, ultraviolet (uv) light. AH sealants are affected by weathering, but there is much difference in the effect of weathering on different sealants. Most sHicones are stable with respect to uv exposure. Urethanes and polysulfides show effects of uv exposure, but can be formulated with uv absorbers to provide reasonable lifetimes in most appHcations. However, there are exceptions in aH classes of sealants and specifiers must be carehil to look for test data that has proven a specific sealant s durabHity. The source of the test data is also important data from an independent testing laboratory is generaHy apt to be more reHable. [Pg.309]

Year U.S. Capacity, t Quantity, t Import Data Value ... [Pg.315]

The challenges for visualization are at least twofold. Easter graphics hardware will be required to display and manipulate more complex data displays. More importantly, the human effort required to develop visualization systems must be reduced. It is the realm of the expert programmer to implement a usable visualization system. General purpose tools that allow the nonexpert to import data in different formats into robust visualization systems are just beginning to appear. [Pg.93]

Flammability—Flash Point The closed-cup flash point determination produces the most important data to determine the potential for fire. The flash point is the lowest temperature at which the vapors can be ignited under conditions defined by the test apparatus and method. [Pg.2313]

To provide a reference for those working on power projects or at sites, we provide some important data on different types of LT and HT power cables in this appendix. The cables described here are in use for all kinds of power distribution applications. Of these, XLPE cables are also used for power transmission applictiiions. To help a user to select the most appropriate types of cables, we also provide a brief comparative chart of the various types of cables being manufactured. Tables giving the technical particulars of such cables in all voltage ratings have also been provided. [Pg.531]

Galvanic anodes of cast iron were already in use in 1824 for protecting the copper cladding on wooden ships (see Section 1.3). Even today iron anodes are still used for objects with a relatively positive protection potential, especially if only a small reduction in potential is desired, e.g., by the presence of limiting values U" (see Section 2.4). In such cases, anodes of pure iron (Armco iron) are mostly used. The most important data are shown in Table 6-1. [Pg.185]

Information on 3,500 chemical substances that are hazardous and of economic importance. Data include chemical names,... [Pg.287]

This group of reactions has already been reviewed by Quilico and Barnes. However, the important data recently published make it advisable to reassess the subject. In 1891 Claisen first gave an example of the cleavage of the isoxazole ring he treated 5-phenylisoxazole with dilute sodium hydroxide or sodium ethylate at room temperature,the reaction involving the cleavage of the 0—N bond to yield a y8-ketonitrile (106). [Pg.398]

It is estimated that the earth s age is in the neighborhood of 4 to 7 billion years. These estimates are basically derived from carbon-14, potassium-40, uranium-235, and uranium-238 dating of earth rocks and meteorites. The meteorites give important data as to the age of our solar system. Geologic time is felt to be represented by the presence of rock intervals in the geologic column (layers of rock formations in vertical depth) or by the absence of equivalent rocks in correlative columns in adjacent locations [25,26]. The two basic factors that are used to determine geologic time are ... [Pg.241]

From this equation, it apparent that the bandwidth should be as small as possible to minimize the spacing and avoid missing important data. The typical number of lines of resolution is 100 to 12,800, but it is important to make sure that the selected bandwidth and resolution include all... [Pg.716]

Because of memory impairment and alterations in tilinking in some patients witii parkinsonism, a history obtained from tiie patient may be unreliable When necessary, tiie nurse obtains tiie health history from a family member. Important data to include is information regarding tiie symptoms of tiie disorder, tiie length of... [Pg.269]

Most of the information available concerns SOPh and S02Ph, with some about the effect of substituents in the phenyl. The most important data are summarized in Table 6. [Pg.505]

Despite the plethora of data in the scientific literature on thermophysical quantities of substances and mixtures, many important data gaps exist. Predictive capabilities have been developed for problems such as vapor-liquid equihbrium properties, gas-phase and—less accmately—liquid-phase diffusivities, aud solubilities of uouelectrolytes. Yet there are many areas where improved predictive models would be of great value. Au accrrrate and rehable predictive model can obviate the need for costly, extensive experimental measurements of properties that are critical in chemical manufactming processes. [Pg.209]

Data file FILLTUBE.xls.dat contains a set of 20 in-process controls (IPC) of n = 50 simulated weighings each. The first 10 vectors are for EU conditions (/i = 20.02 g), the others for Swiss regulations (/r = 20.35 g) a = 0.75 g. The default settings can be changed. Pressing [F9] initiates a new simulation. The results can be captured and incorporated into a. dat file, see program DATA, option (Import Data from Excel). For one specific simulation, the results were as follows. [Pg.241]

If uncontrolled forces are at work, or important data has not been collected. [Pg.368]

Instructions) and (Import Data from Excel) allow a portion of an Excel spreadsheet to be copied into a SMAC-data file the necessary steps are as follows (1) open the Excel file, mark the range to be copied and press [Copy] (2) open DATA and create a new or open an existing data file (3) select (Input Data) (Import Data from Excel) and position the cursor on an appropriate cell, e.g. cell (1,1). The imported data replaces any data that was in that cell range. If the imported cell range needs more columns or rows than are presently available, the data array is correspondingly increased in size. Headers and dimensions can be added later. [Pg.369]

The overall conclusion is that there is already some data available on the influence of stress on adherent cells but there is still important data missing to understand the behavior of adherent cells in bioreactors. [Pg.136]

The development of new rheological measuring devices has given us a wide range of possibilities to characterize pectins in solutions and gels. This may give us important data for... [Pg.407]

There are a number of light stable isotope measurements that provide very important data in the study of paleoclimates to better understand and interpret anthropogenic contributions to present-day climate change (Fritz and Fontes 1980). These measurements involve the determination of carbon and oxygen isotopes in fresh-... [Pg.228]

The adverse event form is a cornerstone of patient safety monitoring, and as such it contains very important data. There are several data issues for the statistical programmer to be concerned about here. [Pg.33]

In guidance document ICH E3, Structure and Content of Clinical Study Reports, the FDA defines treatment-emergent signs and symptoms (TESS) as events not seen at baseline and events that worsened even if present at baseline. As simple as that may sound, it can sometimes be quite difficult to program. The important data variables that come into play are dosing record dates and times, adverse event start and stop times, and adverse event severity. All of these data variables need to be completed accurately for TESS to be calculated properly. [Pg.33]

In most cases, the data that you use for clinical trial analyses are found in some kind of computer file external to the SAS System. The data you need may be found in a permanent SAS data set, a relational database table found in Oracle or Microsoft SQL Server, a Microsoft Access or Excel file, a simple delimited ASCII text file, or even an XML file. In any case SAS provides a wide array of ways in which to import data files into SAS. We explore these tools and the advantages and disadvantages of each in this chapter. [Pg.42]

On occasion you may find that you need to import data from ASCII text files for analysis. In this section, traditional rectangular ASCII text files are discussed. Although XML files are composed of ASCII text, they pose unique challenges that are discussed later in this chapter. Some examples of ASCII text data that you might need to import include... [Pg.44]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...