Infinitesimals

Tracing the historical development of quantum physics, the author describes the baffling and seemingly lawless world of leptons, hadrons, gluons and quarks and provides a lucid and exciting guide for the layman to the world of infinitesimal particles. [Pg.440]

The equations of electrocapillarity become complicated in the case of the solid metal-electrolyte interface. The problem is that the work spent in a differential stretching of the interface is not equal to that in forming an infinitesimal amount of new surface, if the surface is under elastic strain. Couchman and co-workers [142, 143] and Mobliner and Beck [144] have, among others, discussed the thermodynamics of the situation, including some of the problems of terminology. [Pg.202]

In order to detennine the relationship between R translation where A X is infinitesimally small. In this case we can approximate the right hand side of... [Pg.163]

There are several different fomis of work, all ultimately reducible to the basic definition of the infinitesimal work Dn =/d/ where /is the force acting to produce movement along the distance d/. Strictly speaking, both/ and d/ are vectors, so Dn is positive when the extension d/ of the system is in the same direction as the applied force if they are in opposite directions Dn is negative. Moreover, this definition assumes (as do all the equations that follow in this section) that there is a substantially equal and opposite force resisting the movement. Otiierwise the actual work done on the system or by the system on the surroundings will be less or even zero. As will be shown later, the maximum work is obtained when tlie process is essentially reversible . [Pg.325]

Converting to current dQldt where dt is an infinitesimal time interval and to resistance SA one can rewrite this equation in the fomi... [Pg.327]

Wlien a specimen is moved in or out of an electric field or when the field is increased or decreased, the total work done on the whole system (charged condenser + field + specimen) in an infinitesimal change is... [Pg.328]

A particular path from a given initial state to a given final state is the reversible process, one in which after each infinitesimal step the system is in equilibrium with its surroundings, and one in which an infinitesimal change in the conditions (constraints) would reverse the direction of the change. [Pg.331]

In the example of pressure-volume work in die previous section, the adiabatic reversible process consisted simply of the sufficiently slow motion of an adiabatic wall as a result of an infinitesimal pressure difference. The work done on the system during an infinitesimal reversible change in volume is then -pdVand one can write equation (A2.1.11) in the fomi... [Pg.333]

Equation (A2.1.15) involves only state fiinctions, so it applies to any infinitesimal change in state whether the actual process is reversible or not (although, as equation (A2.1.14) suggests, dS is not experimentally accessible unless some reversible path exists). [Pg.335]

Essentially this requirement means that, during die irreversible process, innnediately inside die boundary, i.e. on the system side, the pressure and/or the temperature are only infinitesimally different from that outside, although substantial pressure or temperature gradients may be found outside the vicinity of the boundary. Thus an infinitesimal change in p or T would instantly reverse the direction of the energy flow, i.e. the... [Pg.340]

There exists a state function S, called the entropy of a system, related to the heat Dq absorbedfrom the surroundings during an infinitesimal change by the relations... [Pg.341]

Two subsystems a. and p, in each of which the potentials T,p, and all the p-s are unifonn, are pennitted to interact and come to equilibrium. At equilibrium all infinitesimal processes are reversible, so for the overall system (a + P), which may be regarded as isolated, the quantities conserved include not only energy, volume and numbers of moles, but also entropy, i.e. there is no entropy creation in a system at equilibrium. One now... [Pg.343]

Such an ensemble of systems can be geometrically represented by a distribution of representative points m the F space (classically a continuous distribution). It is described by an ensemble density fiinction p(p, q, t) such that pip, q, t)S Q is the number of representative points which at time t are within the infinitesimal phase volume element df p df q (denoted by d - D) around the point (p, q) in the F space. [Pg.384]

A homogeneous metastable phase is always stable with respect to the fonnation of infinitesimal droplets, provided the surface tension a is positive. Between this extreme and the other thennodynamic equilibrium state, which is inhomogeneous and consists of two coexisting phases, a critical size droplet state exists, which is in unstable equilibrium. In the classical theory, one makes the capillarity approxunation the critical droplet is assumed homogeneous up to the boundary separating it from the metastable background and is assumed to be the same as the new phase in the bulk. Then the work of fonnation W R) of such a droplet of arbitrary radius R is the sum of the... [Pg.754]

An electron or atomic beam of (projectile or test) particles A with density N, of particles per cm travels with speed V and energy E tln-ongh an infinitesimal thickness dv of (target or fielc0 gas particles B at rest with... [Pg.2005]

Figure C2.2.12. A Freedericksz transition involving splay and bend. This is sometimes called a splay defonnation, but only becomes purely splay in the limit of infinitesimal displacements of the director from its initial position [106]. The other two Freedericksz geometries ( bend and twist ) are described in the text.

Explicit forms of the coefficients Tt and A depend on the coordinate system employed, the level of approximation applied, and so on. They can be chosen, for example, such that a part of the coupling with other degrees of freedom (typically stretching vibrations) is accounted for. In the space-fixed coordinate system at the infinitesimal bending vibrations, Tt + 7 reduces to the kinetic energy operator of a two-dimensional (2D) isotropic haiinonic oscillator. [Pg.480]

A convenience of electronic basis functions (53) is that they reduce at infinitesimal-amplitude bending to (28) with the same meaning of the angle 9 we may employ these asymptotic forms in the computation of the matrix elements of the kinetic energy operator and in this way avoid the necessity of carrying out calculations of the derivatives of the electronic wave functions with respect to the nuclear coordinates. The electronic part of the Hamiltonian is represented in the basis (53) by... [Pg.522]

The present perturbative beatment is carried out in the framework of the minimal model we defined above. All effects that do not cincially influence the vibronic and fine (spin-orbit) stracture of spectra are neglected. The kinetic energy operator for infinitesimal vibrations [Eq. (49)] is employed and the bending potential curves are represented by the lowest order (quadratic) polynomial expansions in the bending coordinates. The spin-orbit operator is taken in the phenomenological form [Eq. (16)]. We employ as basis functions... [Pg.533]

In performing this series of integrations, it is understood that they are carried out in the conect order and always for consecutive infinitesimal sections along... [Pg.650]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...