Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Light vacuum

Characteristics Atmospheric residue (Arabian light) Vacuum residue (VR) Visbroken residue (on VR) LCO (low sulfur) HCO (low sulfur)... [Pg.241]

Feedstocks are light vacuum distillates and/or heavy ends from crude distillation or heavy vacuum distillates from other conversion processes visbreaking, coking, hydroconversion of atmospheric and vacuum residues, as well as deasphalted oils. [Pg.391]

Extracts (petroleum), heavy naphthenic distillate solvent Extracts (petroleum), heavy paraffinic distillate solvent Extracts (petroleum), light naphthenic distillate solvent Extracts (petroleum), light paraffinic distillate solvent Extracts (petroleum), light vacuum gas oil solvent Euel oil no. 6... [Pg.94]

Residues (petroleum), heavy coker and light vacuum Residues (petroleum), catalytic reformer fractionator Residues (petroleum), hydrodesulphurized atmospheric tower Residues (petroleum), topping plant, low sulphur Residues (petroleum), heavy coker gas oil and vacuum gas oil Residues (petroleum), thermal cracked... [Pg.95]

Gas oils (petroleum), light vacuum, thermal-cracked hydrodesulphurized Gas oils (petroleum), hydrotreated vacuum... [Pg.123]

An aliquot of the diatom sample is brought down onto a Nucleopore filter (2.0 pm pore size will work for most diatoms) using a hand pump or light vacuum filter system. [Pg.205]

After the composite has been manufactured onto its mould, an anti-adherent flexible sheet is applied onto it, and then a light vacuum is created by a suitable system (see Figure 5.24). [Pg.746]

Light Vacuum Gas Oil CAS number Classification Hazard class TSCA Safety profile 64741-58-8 Flammable Liquid 3 Reported in inventory Possible carcinogen pulmonary aspiration can cause severe pneumonitis. [Pg.249]

A light vacuum gas oil (LVGO) is charged to the top plate of zone 3, removed from the bottom tray of this zone and pumped to furnace no. 1 that operates at 1000 psig and 1000°F. A heavy... [Pg.33]

This breakeven relationship between heavy gas oil (actually light vacuum gas oil) is shown more conveniently in Figure 4. [Pg.182]

Thus, at today s naphtha prices and by-product markets, pyrolysis of light vacuum gas oil appears closely competitive with naphtha for ethylene production. [Pg.182]

In Europe, cracking of either light vacuum gas oil or naphtha give very comparable ethylene production costs at current price levels. This holds for either premium or fuel value by-products. [Pg.192]

Property Arabian light vacuum residue Arabian heavy vacuum residue Orinoco Cerro Negro vacuum residue Offshore California atm. residue... [Pg.246]

Property Arabian light vacuum residuum Arabian heavy vacuum residuum Orinoco Cerro Negro vacuum residuum Offshore California atm. residuum... [Pg.356]

Figure 3. Angular dependence of the effective layer thickness (dr) and the "penetration depth (d ) for parallel and perpendicular polarization of the incident light ( vacuum wavelength of the light n, = 1.51 n2 = 1.0). Figure 3. Angular dependence of the effective layer thickness (dr) and the "penetration depth (d ) for parallel and perpendicular polarization of the incident light ( vacuum wavelength of the light n, = 1.51 n2 = 1.0).
Figure 4. Catalytic cracking yields from hydrotreated feeds. Shale oil arm Arabian Light vacuum gas oil at 975°F (O), shale oil containing 870 ppm N (0), shale oil containing 385 ppm N. Figure 4. Catalytic cracking yields from hydrotreated feeds. Shale oil arm Arabian Light vacuum gas oil at 975°F (O), shale oil containing 870 ppm N (0), shale oil containing 385 ppm N.
In the crucible-pulling process [8], this high-purity Si, in a light vacuum or in an atmosphere of Ar or He, is melted in an Si02 crucible supported by a carbon crucible. A seed Si crystal, with prominent (100) or (101) faces, on the tip of a rod, is made to touch the melt, then the rod is pulled slowly... [Pg.522]

Table IV lists the overall mean sizes and the mean sizes for the sulfur-, nickel-, and vanadium-containing molecules obtained for duplicate determinations on an Arabian Light vacuum asphaltene performed two years apart. The precision of the measurements shows the reproducibility of this technique. Table IV lists the overall mean sizes and the mean sizes for the sulfur-, nickel-, and vanadium-containing molecules obtained for duplicate determinations on an Arabian Light vacuum asphaltene performed two years apart. The precision of the measurements shows the reproducibility of this technique.
Since residuum hydroprocessing involves both demetallation and desulfurization reactions, the residuum metal and sulfur-containing molecules and their sizes are important. As shown in Table V and illustrated in Figure 5 for the Arabian Light vacuum asphaltene, the sulfur, nickel, and vanadium compounds for the asphaltene from any given residuum have similar sizes ... [Pg.150]

See other pages where Light vacuum is mentioned: [Pg.93]    [Pg.94]    [Pg.95]    [Pg.48]    [Pg.122]    [Pg.124]    [Pg.581]    [Pg.11]    [Pg.36]    [Pg.168]    [Pg.185]    [Pg.241]    [Pg.241]    [Pg.241]    [Pg.254]    [Pg.346]    [Pg.106]    [Pg.43]    [Pg.44]    [Pg.978]    [Pg.140]    [Pg.143]    [Pg.143]    [Pg.146]    [Pg.149]   
See also in sourсe #XX -- [ Pg.42 ]



SEARCH



Arabian light vacuum gas oil

Light vacuum distillation unit

Speed of light in vacuum

Vacuum Arabian Light

Vacuum ultra-violet light

Vacuum ultraviolet light

Velocity of light in vacuum

Wavelength of light in vacuum

© 2024 chempedia.info