Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Materials science glass

Frontiers in Material Science Glasses and Amorphous Materials, Special Issue, Science 267, 1924—1953 (1995). [Pg.508]

Department of Materials Science (Glass and Ceramics), University of Erlangen-Nuemberg, D-91058... [Pg.421]

Light microscopy is of great importance for basic research, analysis in materials science and for the practical control of fabrication steps. Wlien used conventionally it serves to reveal structures of objects which are otherwise mvisible to the eye or magnifying glass, such as micrometre-sized structures of microelectronic devices on silicon wafers. The lateral resolution of the teclmique is detennined by the wavelength of tire light... [Pg.1654]

L. D. Pye and co-workers. Borate Glasses Structure, Properties, Applications, Vol. 12, Materials Science Research, Plenum Press, New York, 1978. [Pg.317]

Materials science has in its time suffered a great deal of the second type of criticism. Thus Calvert (1997) asserts that metallurgy remains a proper discipline, with fundamental theories, methods and boundaries. Things fell apart when the subject extended to become materials science, with the growing use of polymers, ceramics, glasses and composites in engineering. The problem is that all materials are different and we no longer have a discipline. ... [Pg.22]

Figure 3-53 Photoelastic Stress Patterns for Three E-glass Fibers Embedded in an Epoxy Matrix (Courtesy of Materials Sciences Corporation)... Figure 3-53 Photoelastic Stress Patterns for Three E-glass Fibers Embedded in an Epoxy Matrix (Courtesy of Materials Sciences Corporation)...
Section V Crack Growth and Fatigue in Strength of Inorganic Glass , ed. Kurkjian, C. R., NATO Conference Series VI, Materials Science, Volume II, Plenum Press, New York (1985)... [Pg.886]

Tanaka K (2001) Chalcogenide Glasses. In Encyclopedia of Materials Science and Technology, Elsevier Science Ltd Oxford ISBN 0-08-0431526, pp. 1123-1131 Ovshinsky SR (1968) Reversible Electrical Switching Phenomena in Disordered Stmctures. Phys Rev Lett 21 1450-1453... [Pg.54]

The invention and development of the zinc polycarboxylate and glass-ionomer cements was brought about by a change in basic attitudes in materials science in dentistry. This largely revolved around the necessity of inventing materials which would adhere to tooth enamel and dentine. [Pg.91]

Hill, R. G., Wilson, A. D. Warrens, C. P. (1989). The influence of poly(acrylic acid) molecular weight on the fracture toughness of glass-ionomer cements. Journal of Materials Science, 24, 363-71. [Pg.182]

During past decades, a relatively new method attracted much of attention of experimentalists, namely, the sol-gel method widely implemented in numerous scientific and industrial applications. Actually, it caused a breakthrough in material science it is worth mentioning that sol-gel routes are cmcial for synthesis of nanomaterials, and one of methods of the 21st century namely, commercial nanoporous glasses are readily available on the market just thanks to sol-gel technologies. [Pg.502]

Juhasz, J.A., Best, S.M., Bonfield, W., Kawashita, M., Miyata, N., Kokubo, T. and Nakamura, T. (2003) Apatiteforming ability of glass-ceramic apatite-wollastonite — polyethylene composites effect of filler content Journal of Materials Science-Materials in Medicine, 14, 489-95. [Pg.361]

Secondary ion mass spectrometry (SIMS) is a widespread analytical technique for the study of surfaces in materials science. Mostly used for elemental analyses and depth profiling, it is particularly relevant for many different fields of research including cultural heritage studies. Reviews of its use for the study of ancient glasses or metal artefacts already exist in the literature [Spoto 2000, Darque-Ceretti and Aucouturier 2004, Dowsett and Adriaens 2004, Adriens and Dowsett 2006, Anderle et al. 2006, McPhail 2006], but as only elemental information is obtained, these studies are limited to inorganic materials. [Pg.433]

Cox, G.A. and Cooper, G.I. (1995). Stained glass in York in the mid-16th century - analytical evidence for its decay. Glass Technology 36 129-134. Cox, G.A. and Ford, B.A. (1993). The long-term corrosion of glass by ground-water. Journal of Materials Science 28 5637-5647. [Pg.188]

Paul, A. (1977). Chemical durability of glasses a thermodynamic approach. Journal of Materials Science 12 2246-2268. [Pg.190]

Redwine, R.H. and Field, M.B. (1968). The effect of microstructure on the physical properties of glasses in the sodium silicate system. Journal of Materials Science 3 380-388. [Pg.191]

J. Zarzycki, Ed., Glasses and Amorphous Materials, Materials Science and Technology,... [Pg.57]

Some important everyday items that are made from polymers with widely different properties Include billiard balls, plastic dishes, soda bottles, barrier and decorative films, egg cartons, polymeric drinking glasses, foam seats, and automotive tires. These applications for synthetic polymers have developed over about 150 years. As shown in Table 2.1, modern polymer material science and technology can be traced back to as early as 1770 [1]. Some Important advances In the understanding of polymer production were developed before World War II. [Pg.27]

See other pages where Materials science glass is mentioned: [Pg.107]    [Pg.107]    [Pg.248]    [Pg.562]    [Pg.316]    [Pg.39]    [Pg.210]    [Pg.140]    [Pg.4]    [Pg.127]    [Pg.291]    [Pg.302]    [Pg.303]    [Pg.304]    [Pg.308]    [Pg.384]    [Pg.506]    [Pg.157]    [Pg.95]    [Pg.179]    [Pg.33]    [Pg.96]    [Pg.288]    [Pg.26]    [Pg.73]    [Pg.314]    [Pg.77]    [Pg.126]    [Pg.151]    [Pg.117]    [Pg.172]   


SEARCH



Glass material

Glass materials science and

Materials Science of the Glass Transition Its

Materials science

© 2024 chempedia.info