Multiple analytes

Finally, quantitative problems involving multiple analytes and back titrations also can be solved by applying the principle of conservation of electron pairs. [Pg.329]

Kisner, H.J., et. al. "Multiple Analytical Frequencies and Standards for the Least-Squares Spectrometruc Analysis of Serun Lipids", Anal. Chem. 1983 (55) 1703-1707... [Pg.192]

Traditional analytical methods make extensive use of computers, but typically these methods still require constant restructuring of the data and multiple analytical tools. This endless restructuring wastes time and productivity and also makes the analytical processes difficult to document, audit, and reproduce in real time. This situation also makes it difficult to reconstruct and update analyses in real time when new adverse event data become available or when new questions need to be asked. The application of comprehensive data standards allows the use of integrated, reusable software for analyzing adverse event data. This integration facilitates the reproducibility of the results. [Pg.668]

A further extension of the DFG S19 method was achieved when polar analytes and those unsuitable for GC were determined by LC/MS or more preferably by liquid chromatography/tandem mass spectrometry (LC/MS/MS). Triple-quadrupole MS/MS and ion trap MS" have become more affordable and acceptable in the recent past. These techniques provide multiple analyte methods by employing modes such as time segments, scan events or multiple injections. By improving the selectivity and sensitivity of detection after HPLC separation, the DFG S19 extraction and cleanup scheme can be applied to polar or high molecular weight analytes, and cleanup steps such as Si02 fractionation or even GPC become unnecessary. [Pg.57]

The Array Biosensor developed at the Naval Research Laboratory (NRL) is an automated, portable detection device for simultaneous analysis of up to six samples for multiple analytes with the size of a shoebox (Figure 10) 42-43. [Pg.447]

Taitt C.R., Golden J.P., Shubin Y.S., Shriver-Lake L.C., Sapsford K.E., Rasooly A., Ligler F.S. A portable array biosensor for detecting multiple analytes in complex samples, J. Microbiol. Ecol. 2003 Feb 9. [Pg.455]

Chromatographic procedures applied to the identification of proteinaceous paint binders tend to be rather detailed consisting of multiple analytical steps ranging from solvent extractions, chromatography clean up, hydrolysis, derivatisation reactions, and measurement to data analysis. Knowledge of the error introduced at each step is necessary to minimise cumulative uncertainty. Reliable results are consequently obtained when laboratory and field blanks are carefully characterised. Additionally, due to the small amounts of analyte and the high sensitivity of the analysis, the instrument itself must be routinely calibrated with amino acid standards along with measurements of certified reference proteins. All of these factors must be taken into account because many times there is only one chance to take the measurement. [Pg.247]

C. Barzen, A. Brecht, and G. Gauglitz, Optical multiple-analyte immunosensor for water pollution control. Biosens. Bioelectron. 17, 289—295 (2002). [Pg.77]

As the preceding discussion of nitrogenase metal-sulfur clusters indicate, analysis of complex bioinorganic systems requires the use of multiple analytical techniques and the cooperative exchange of data and ideas of many researchers. The descriptions in this chapter have attempted to give students some idea of the scope and complexity of instrumental techniques available to the bioinorganic chemist. It has not been intended to be either comprehensive or theoretical in presentation. Students are encouraged to acquaint themselves further with the theory and practice of instrumental techniques, especially those that are important to their particular research interests. [Pg.121]

The use of high flow and fast gradient HPLC has gained a lot of popularity because of the ability to reduce LC/MS/MS cycle times during bioanalysis. In the case of fast gradient HPLC, peak shapes were improved and method development times were minimized, especially when multiple analytes with diverse functionalities had to be separated. Flows as high as 1.5 to 2 mL/min were achieved on a 2.1 x 30 mm Xterra C18 column.7 Details are discussed in a recent review.8... [Pg.75]

Selection of on-site analytical techniques involves evaluation of many factors including the specific objectives of this work. Numerous instrumental techniques, GC, GC-MS, GC-MS-TEA, HPLC, HPLC-MS-MS, IR, FTIR, Raman, GC-FTIR, NMR, IMS, HPLC-UV-IMS, TOF, IC, CE, etc., have been employed for their laboratory-based determination. Most, however, do not meet on-site analysis criteria, (i.e., are not transportable or truly field portable, are incapable of analyzing the entire suite of analytes, cannot detect multiple analytes compounded with environmental constituents, or have low selectivity and sensitivity). Therefore, there exists no single technique that can detect all the compounds and there are only a few techniques exist that can be fielded. The most favored, portable, hand-held instrumental technique is ion mobility spectrometry (IMS), but limitations in that only a small subset of compounds, the inherent difficulty with numerous false positives (e.g., diesel fumes, etc.), and the length of time it takes to clear the IMS back to background are just two of its many drawbacks. [Pg.126]

The importance of these surface-analysis techniques has resulted in the development of a range of highly automated instruments. In the effort to obtain multiple analytical data, a trend has occurred during the last ten years to build combined instruments, that is apparatus which will permit measurements by several techniques, in a single vacuum system. In this way, greater utilization of the complex instrumentation involved and a more economic use of the functional parameters of the instruments are ensured. [Pg.450]

Current security and health concerns require robust, cost-effective, and efficient tools and strategies for the simultaneous analysis, detection, and often even quantification of multiple analytes or events in parallel. The ability to screen for and quantify multiple targets in a single assay or measurement is termed multiplexing. [Pg.27]

Salas VM, Edwards BS, Sklar LA (2008) Advances in multiple analyte profiling. Adv Clin Chem 45 47-74... [Pg.227]

Polarography is able to determine multiple analytes (cf. Figure 6.11). [Pg.160]

Unfortunately, larger values of AE cause analyses of multiple-analyte mixtures to be more difficult since peak resolution is decreased... [Pg.183]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...