Numerical techniques

Both in the SCF theory and in the EP theory the central numerical task is to solve a closed set of self-consistent equations one or many times. This is usually achieved with the following general scheme [Pg.19]

Mix the old fields and the new fields according to some appropriate prescription. [Pg.19]

Go back to (1). Continue this until the fields have converged to some value within a pre-defined accuracy. [Pg.19]

The numerical challenge is thus twofold. First, one needs an efficient iteration prescription. Second, one needs a fast method to solve the diffusion equation. [Pg.19]

We will begin with presenting some possible iteration prescriptions. Our list is far from complete. We will not derive the methods, nor discuss the numerical background and the numerical stability. For more information, the reader is referred to the references. [Pg.19]

In order to compute the densities for a given guess for the fields, the modified diffusion and the Poisson-Boltzmann equations need to be solved. A number of numerical techniques for solving the modified diffusion equation in the context of neutral polymers already exist in the literature [55,80]. Similar techniques can be used for solving the modified diffusion equation encountered in the case of polyelectrolytes. Furthermore, these techniques can be readily generalized to solve the Poisson-Boltzmann equation. [Pg.315]

We will not attempt here to give a detailed explanation of the numerical aspects (fundamentals of discretization, error estimates, and error control) of CFD since a number of excellent texts are available in the literature that deal in depth with this matter (Fletcher, 1988a,b Hirsch, 1988, 1990). First some general aspects of the numerical techniques used for solving fluid flow problems are discussed and, subsequently, a distinction is made between single-phase flows and [Pg.244]

Structured grids offer better possibilities to represent systems with complex geometric features. Furthermore, staggered and nonstaggered (collocated) computational grids can be distinguished (see Fig. 5). [Pg.246]

IWW1 CkMittol volume x-momentum I yyyA Control volume y-momemum [Pg.246]

The solution of the resulting nonlinear equations is usually achieved via an iterative algorithm. Once a converged solution has been obtained it is essential to assess the invariance of the computational results with respect to the temporal and/or spatial discretisation. This aspect is unfortunately often not addressed in computational studies due to, amongst others, computer time constraints. [Pg.247]

Postprocessing constitutes a very important final step, especially for the chemical engineer because in many chemical processes besides fluid phenomena many other aspects have to be considered (i.e., fouling, catalyst deactivation). [Pg.247]

Frenkel D 1995 Numerical techniques to study complex liquids Observation, Prediction and Simuiation of Phase Transitions in Oompiex Fiuids vol 460 NATO ASi Series C ed M Baus, L F Rull and J-P Ryckaert (Dordrecht Kluwer) pp 357-419... [Pg.2285]

The simplest of the numerical techniques for the integration of equations of motion is leapfrog-Verlet algorithm (LFV), which is known to be symplectic and of second order. The name leapfrog steams from the fact that coordinates and velocities are calculated at different times. [Pg.335]

In this paper, we focus on numerical techniques for integrating the QCMD equations of motion. The aim of the paper is to systematize the discussion concerning numerical integrators for QCMD by ... [Pg.396]

In most real life applications, the evaluation of the forces acting on the classical particles (i.e., the evaluation of the gradient of the interaction potential) is by far the most expensive operation due to the large number of classical degrees of freedom. Therefore we will concentrate on numerical techniques which try to minimize the number of force evaluations. [Pg.399]

The simplest case of fluid modeling is the technique known as computational fluid dynamics. These calculations model the fluid as a continuum that has various properties of viscosity, Reynolds number, and so on. The flow of that fluid is then modeled by using numerical techniques, such as a finite element calculation, to determine the properties of the system as predicted by the Navier-Stokes equation. These techniques are generally the realm of the engineering community and will not be discussed further here. [Pg.302]

Trace Mercury. There are a number and variety of methods and instmments to determine trace quantities of both inorganic and organic mercury ia natural or synthetic substances (19) (see also Trace and residue analysis). Literature describiag numerous techniques and trace element analysis of a myriad of mercury-containing substances is available (20). Only the most commonly used methods are mentioned hereia. [Pg.108]

The stmcture of the parent ring has been studied by numerous techniques. The precise data from microwave studies (8) on the dimensions and bond angles is given in Fig. 1. [Pg.17]

Fig. 7. Comparison of various transport schemes for advecting a cone-shaped puff in a rotating windfield after one complete rotation (a), the exact solution (b), obtained by an accurate numerical technique (c), the effect of numerical diffusion where the peak height of the cone has been severely tmncated and (d), where the predicted concentration field is very bumpy, showing the effects of artificial dispersion. In the case of (d), spurious waves are...

Correlation methods discussed include basic mathematical and numerical techniques, and approaches based on reference substances, empirical equations, nomographs, group contributions, linear solvation energy relationships, molecular connectivity indexes, and graph theory. Chemical data correlation foundations in classical, molecular, and statistical thermodynamics are introduced. [Pg.232]

The mathematical details outlined here include both analytic and numerical techniques usebil in obtaining solutions to problems. [Pg.426]

Adjugate Matrix of a Matrix Let Ay denote the cofactor of the element Oy in the determinant of the matrix A. The matrix B where B = (Ay) is called the adjugate matrix of A written adj A = B. The elements by are calculated by taking the matrix A, deleting the ith row and Jth. column, and calculating the determinant of the remaining matrix times (—1) Then A" = adj A/lAl. This definition may be used to calculate A"h However, it is very laborious and the inversion is usually accomplished by numerical techniques shown under Numerical Analysis and Approximate Methods. ... [Pg.465]

Numerical techniques therefore do not yield exact results in the sense of the mathematician. Since most numerical calculations are inexact, the concept of error is an important feature. The error associated with an approximate value is defined as... [Pg.467]

Normal distribution (integrate using numerical techniques or use SND table)... [Pg.358]

Errors in advection may completely overshadow diffusion. The amplification of random errors with each succeeding step causes numerical instability (or distortion). Higher-order differencing techniques are used to avoid this instability, but they may result in sharp gradients, which may cause negative concentrations to appear in the computations. Many of the numerical instability (distortion) problems can be overcome with a second-moment scheme (9) which advects the moments of the distributions instead of the pollutants alone. Six numerical techniques were investigated (10), including the second-moment scheme three were found that limited numerical distortion the second-moment, the cubic spline, and the chapeau function. [Pg.326]

In this chapter, I propose to take a strongly historical approach to the field, and focus on just a few of the numerous techniques of investigation and characterisation . What is not in doubt is that these techniques, and the specialised research devoted to improving them in detail, are at the heart of modern materials science. [Pg.214]

Numerous techniques of eharaeterisation have had to be excluded from this historieal overview, for simple lack of space. A few are treated elsewhere in the book. Diffraetion methods, apart from a few words about neutron diffraction, including the powerful small-angle seattering methods, were left out, partly because X-ray diffraetion has also received due attention elsewhere in the book methods of measuring eleetrieal and magnetie properties have not been diseussed the important... [Pg.245]

There are numerous techniques which provide information related to the surface energy of solids. A large array of high-vacuum, destructive and non-destructive techniques is available, and most of them yield information on the atomic and chemical composition of the surface and layers just beneath it. These are reviewed elsewhere [83,84] and are beyond the scope of the present chapter. From the standpoint of their effect on wettability and adhesion, the property of greatest importance appears to be the Lifshitz-van der Waals ( dispersion) surface energy, ys. This may be measured by the simple but elegant technique of... [Pg.34]

Selecting the most suitable numerical techniques to solve the equations. [Pg.813]

Choosing or developing a suitable computer program (also refeiTcd to as a code) to implement the numerical techniques. [Pg.813]

Numerous techniques may be used, each with disadvantages and advantages. The methods used are... [Pg.162]

These coupled second-order partial differential equations do not have a closed-form solution. Accordingly, the approximate numerical technique of finite differences is employed. First, however, the boundary conditions must be prescribed in order to complete the formulation of the problem. Symmetry of the laminate about several planes permits reduction of the region of consideration to a quarter of the laminate cross section in the y-z plane at any value of x as shown in Figure 4-52. There, along the stress-free upper surface. [Pg.266]

The interlaminar shear stress, t, has a distribution through half the cross-section thickness shown as several profiles at various distances from the middle of the laminate in Figure 4-54. Stress values that have been extrapolated from the numerical data at material points are shown with dashed lines. The value of is zero at the upper surface of the laminate and at the middle surface. The maximum value for any profile always occurs at the interface between the top two layers. The largest value of occurs, of course, at the intersection of the free edge with the interface between layers and appears to be a singularity, although such a contention cannot be proved by use of a numerical technique. [Pg.267]

The availability of large and fast computers, in combination with numerical techniques to compute transient, turbulent flow, has made it possible to simulate the process of turbulent, premixed combustion in a gas explosion in more detail. Hjertager (1982) was the first to develop a code for the computation of transient, compressible, turbulent, reactive flow. Its basic concept can be described as follows A gas explosion is a reactive fluid which expands under the influence of energy addition. Energy is supplied by combustion, which is modeled as a one-step conversion process of reactants into combustion products. The conversion (combustion)... [Pg.109]

The incorporation of thermally labile azo groups into polymer backbones was first reported in the early 1950s [2]. Since then, numerous techniques for synthesizing azo-containing polymers have been developed. The effort to create new azo-containing polymeric materials has been reviewed by several authors [3-8]. [Pg.736]

Site Investigations. Numerous techniques are used for site investigations. The techniques vary in cost from relatively low-cost visual investigations to costly subsurface explorations and laboratory tests [39,40]. [Pg.273]

The mobility of lithium ions in cells based on cation intercalation reactions in clearly a crucial factor in terms of fast and/or deep discharge, energy density, and cycle number. This is especially true for polymer electrolytes. There are numerous techniques available to measure transport... [Pg.510]

Chemometrics, in the most general sense, is the art of processing data with various numerical techniques in order to extract useful information. It has evolved rapidly over the past 10 years, largely driven by the widespread availability of powerful, inexpensive computers and an increasing selection of software available off-the-shelf, or from the manufacturers of analytical instruments. [Pg.1]

In particular, it should be noted that the past traditional equations that have been developed for other materials, principally steel, use the relationship that stress equals the modulus times strain, where the modulus is constant. Except for thermoset-reinforced plastics and certain engineering plastics, most plastics do not generally have a constant modulus of elasticity. Different approaches have been used for this non-constant situation, some are quiet accurate. The drawback is that most of these methods are quite complex, involving numerical techniques that are not attractive to the average designers. [Pg.40]

The upper envelope of E as a function of R maximized over p and p can now be found. We first maximize E over p for each value of p numerical techniques or Eqs. (4-104) and (4-106) can be used. Then we maximize this result over p either by using graphical techniques to find the upper envelope or by using Eqs. (4-97) and (4-98). This optimum E,R curve is generally called the reliability curve for the given channel. [Pg.226]

The marching-ahead technique systematically overestimates when component A is a reactant since the rate is evaluated at the old concentrations where a and 0t A are higher. This creates a systematic error similar to the numerical integration error shown in Figure 2.1. The error can be dramatically reduced by the use of more sophisticated numerical techniques. It can also be reduced by the simple expedient of reducing At and repeating the calculation. [Pg.40]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...