Alkene oxidation dihydroxylation

For alkene dihydroxylations, heavy metal oxides such as 0s04 and Ru04 can be applied. They are efficient catalysts but their toxitity makes their use less desirable and there is a dear need for non-toxic metal catalysts. Nevertheless, only a few reports have focused on the use of iron catalysts for alkene dihydroxylations. All systems described so far try to model the naturally occurring Rieske dioxygenase, an enzyme responsible for the biodegradation of arenes via cis-dihydroxylation by soil baderia [66]. [Pg.82]

Dihydroxylation.The conventional method of alkene dihydroxylation with OSO4 and Al-mcthylmorpholinc V-oxide (NMO) has been modified such that the latter reagent is replaced by substoichiometric A-methylmorpholine and 1.4 equiv of MCPBA. [Pg.131]

Group 8 metal-promoted oxidations alkene cleavage and asymmetric dihydroxylation... [Pg.19]

Sharpless applied the same principle of using a central metal that can hold a chiral directing group proximal to an alkene substrate in an enantloselective version of the OSO4-catalyzed alkene dihydroxylation (Section 12-11). Here, the essence of the chiral auxiliary is an amine derived from the family of natural alkaloids called the cinchona (Section 25-8). One of these amines is dihydroquinine, which is added in the linked dimeric form shown on the right. Instead of H2O2 as the stoichiometric oxidant (Section 12-11), Fe ... [Pg.512]

The carbon-carbon double bond of an alkene 8 can be cleaved oxidatively, by a dihydroxylation reaction-glycol cleavage sequence ... [Pg.139]

With this reaction, two new asymmetric centers can be generated in one step from an achiral precursor in moderate to good enantiomeric purity by using a chiral catalyst for oxidation. The Sharpless dihydroxylation has been developed from the earlier y -dihydroxylation of alkenes with osmium tetroxide, which usually led to a racemic mixture. [Pg.257]

In addition, also nonheme iron catalysts containing BPMEN 1 and TPA 2 as ligands are known to activate hydrogen peroxide for the epoxidation of olefins (Scheme 1) [20-26]. More recently, especially Que and coworkers were able to improve the catalyst productivity to nearly quantitative conversion of the alkene by using an acetonitrile/acetic acid solution [27-29]. The carboxylic acid is required to increase the efficiency of the reaction and the epoxide/diol product ratio. The competitive dihydroxylation reaction suggested the participation of different active species in these oxidations (Scheme 2). [Pg.85]

Syn-Dihydroxylation. When the reaction was first discovered, the syn-dihydroxylation of alkenes was carried out by using a stoichiometric amount of osmium tetroxide in dry organic solvent.56 Hoffman made the observation that alkenes could react with chlorate salts as the primary oxidants together with a catalytic quantity of osmium tetroxide, yielding syn-vicinal diols (Eq. 3.11). This catalytic reaction is usually carried out in an aqueous and tetrahydrofuran solvent mixture, and silver or barium chlorate generally give better yields.57... [Pg.54]

A very effective way of carrying out syn-dihydroxylation of alkenes is by using an osmium tetroxide-tertiary amine N-oxide system. This dihydroxylation is usually carried out in aqueous acetone in either one-or two-phase systems, but other solvents may be required to overcome problems of substrate solubility.61... [Pg.55]

The osmium-catalyzed dihydroxylation reaction, that is, the addition of osmium tetr-oxide to alkenes producing a vicinal diol, is one of the most selective and reliable of organic transformations. Work by Sharpless, Fokin, and coworkers has revealed that electron-deficient alkenes can be converted to the corresponding diols much more efficiently when the pH of the reaction medium is maintained on the acidic side [199]. One of the most useful additives in this context has proved to be citric acid (2 equivalents), which, in combination with 4-methylmorpholine N-oxide (NMO) as a reoxidant for osmium(VI) and potassium osmate [K20s02(0H)4] (0.2 mol%) as a stable, non-volatile substitute for osmium tetroxide, allows the conversion of many olefinic substrates to their corresponding diols at ambient temperatures. In specific cases, such as with extremely electron-deficient alkenes (Scheme 6.96), the reaction has to be carried out under microwave irradiation at 120 °C, to produce in the illustrated case an 81% isolated yield of the pure diol [199]. [Pg.173]

Oxidation of alkenes with osmium tetraoxide is much more moderate than similar oxidations with permanganate. This makes OSO4 a very reliable reagent for cis dihydroxylation. [Pg.894]

In summary, the reaction of osmium tetroxide with alkenes is a reliable and selective transformation. Chiral diamines and cinchona alkakoid are most frequently used as chiral auxiliaries. Complexes derived from osmium tetroxide with diamines do not undergo catalytic turnover, whereas dihydroquinidine and dihydroquinine derivatives have been found to be very effective catalysts for the oxidation of a variety of alkenes. OsC>4 can be used catalytically in the presence of a secondary oxygen donor (e.g., H202, TBHP, A -methylmorpholine-/V-oxide, sodium periodate, 02, sodium hypochlorite, potassium ferricyanide). Furthermore, a remarkable rate enhancement occurs with the addition of a nucleophilic ligand such as pyridine or a tertiary amine. Table 4-11 lists the preferred chiral ligands for the dihydroxylation of a variety of olefins.61 Table 4-12 lists the recommended ligands for each class of olefins. [Pg.224]

Also fifteen years of painstaking work and the gradual improvement of the system, the Sharpless team announced that asymmetric dihydroxylation (AD) of nearly every type of alkene can be accomplished using osmium tetraoxide, a co-oxidant such as potassium ferricyanide, the crucial chiral ligand based on a dihydroquinidine (DHQD) (21) or dihydroquinine (DHQ) (22) and metha-nesulfonamide to increase the rate of hydrolysis of intermediate osmate esters 1811. [Pg.20]

These cinchona esters also effect asymmetric dihydroxylation of alkenes in reactions with an amine N-oxide as the stoichiometric oxidant and 0s04 as the catalyst. Reactions catalyzed by 1 direct attack to the re-face and those catalyzed by 2 direct attack with almost equal preference for the 5i-face. [Pg.238]

In the case of prochiral alkenes the dihydroxylation reaction creates new chiral centers in the products and the development of the asymmetric version of the reaction by Sharpless was one of the very important accomplishments of the last years. He received the Nobel Price in Chemistry 2001 for the development of catalytic oxidation reactions to alkenes. [Pg.254]

Sharpless stoichiometric asymmetric dihydroxylation of alkenes (AD) was converted into a catalytic reaction several years later when it was combined with the procedure of Upjohn involving reoxidation of the metal catalyst with the use of N-oxides [24] (N-methylmorpholine N-oxide). Reported turnover numbers were in the order of 200 (but can be raised to 50,000) and the e.e. for /rara-stilbene exceeded 95% (after isolation 88%). When dihydriquinidine (vide infra) was used the opposite enantiomer was obtained, again showing that quinine and quinidine react like a pair of enantiomers, rather than diastereomers. [Pg.312]

Air or dioxygen can be used as an oxidant with non-chiral DABCO to give a low cost catalyst for dihydroxylation of alkenes into racemic mixtures dihydroquinidine modified catalysts with the air variant give lower e.e. s than the AD-mix catalysts [26],... [Pg.313]

After the "asymmetric epoxidation" of allylic alcohols at the very beginning of the 80 s, at the end of the same decade (1988) Sharpless again surprised the chemical community with a new procedure for the "asymmetric dihydroxylation" of alkenes [30]. The procedure involves the dihydroxylation of simple alkenes with N-methylmorpholine A -oxide and catalytic amounts of osmium tetroxide in acetone-water as solvent at 0 to 4 °C, in the presence of either dihydroquinine or dihydroquinidine p-chlorobenzoate (DHQ-pClBz or DHQD-pClBz) as the chiral ligands (Scheme 10.3). [Pg.284]

Other functionalized supports that are able to serve in the asymmetric dihydroxylation of alkenes were reported by the groups of Sharpless (catalyst 25) [88], Sal-vadori (catalyst 26) [89-91] and Cmdden (catalyst 27) (Scheme 4.13) [92]. Commonly, the oxidations were carried out using K3Fe(CN)g as secondary oxidant in acetone/water or tert-butyl alcohol/water as solvents. For reasons of comparison, the dihydroxylation of trons-stilbene is depicted in Scheme 4.13. The polymeric catalysts could be reused but had to be regenerated after each experiment by treatment with small amounts of osmium tetroxide. A systematic study on the role of the polymeric support and the influence of the alkoxy or aryloxy group in the C-9 position of the immobilized cinchona alkaloids was conducted by Salvadori and coworkers [89-91]. Co-polymerization of a dihydroquinidine phthalazine derivative with hydroxyethylmethacrylate and ethylene glycol dimethacrylate afforded a functionalized polymer (26) with better swelling properties in polar solvents and hence improved performance in the dihydroxylation process [90]. [Pg.218]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...