Oximes carbamates

Of the oxime carbamates, the herbicidal action of one derivative. 0-(N-phenyl-carbamoyDpropanon oxime (proximpham. 11) meets practical requirements. [Pg.626]

The herbicidal activity of this group was recognised by Kiihle el al. (1957). Jumar and Griinzel (1966. 1968) continued the investigation of the relationships between [Pg.626]

Enlargement of the oxime group reduces activity however, halogen substitution in the dimethyloxime group results in a compound with good activity. [Pg.627]

The two possible methods of proximpham synthesis are shown by the following reaction schemes [Pg.627]

Proximpham is a selective soil herbicide, but it is absorbed also through the leaves. It is used in beet, onion, vegetables and ornamental plant cultures for the control of Compositae, Labiatae and Cruciferae weeds, which are tolerant to the other phenylcarbamates. [Pg.627]

Oxime carbamates have high polarity and solubility in water and are relatively chemically and thermally unstable. They are relatively stable in weakly acidic to neutral media (pH 4-6) but unstable in strongly acidic and basic media. Rapid hydrolysis occurs in strongly basic aqueous solutions (pH > 9) to form the parent oxime/alcohol and methylamine, which is enhanced at elevated temperature. Additionally, oxime carbamates are, generally, stable in most organic solvents and readily soluble in acetone, methanol, acetonitrile, and ethyl acetate, with the exception of aliphatic hydrocarbons. Furthermore, most oxime carbamates contain an active -alkyl (methyl) moiety that can be easily oxidized to form the corresponding sulfoxide or sulfone metabolites. [Pg.1144]

Oxime carbamates are not directly amenable to gas chromatography (GC) because of their high thermal instability, which often leads to their breakdown at the injection port or in the column during analysis. Analysis of oxime carbamates by GC with sulfur detection or flame photometric detection involves oxidation of the intact insecticides or alkaline hydrolysis to form the more volatile but stable oxime compound. Enzymatic techniques have been reported for the analysis of these compounds. Enzyme-linked immunosorbent assay (ELISA) has been used to determine aldicarb and its sulfone and sulfoxide metabolites and methomyl in water, soil, and sediment samples. [Pg.1144]

Table 1 Chemical names and properties of selected oxime carbamates... [Pg.1145]

The analytical methods summarized in this article are generally multiresidue methods for the determination of oxime carbamates in different sample matrices (crops, animal tissues, soil, and water). These methods include HPLC with fluorescence, MS, and MS/MS detection. [Pg.1146]

Reversed-phase HPLC followed by post-column derivatization and subsequent fluorescence detection is the most common technique for quantitative determination of oxime carbamate insecticides in biological and environmental samples. However, for fast, sensitive, and specific analysis of biological and environmental samples, detection by MS and MS/MS is preferred over fluorescence detection. Thus, descriptions and recommendations for establishing and optimizing HPLC fluorescence, HPLC/ MS, and HPLC/MS/MS analyses are discussed first. This is followed by specific rationales for methods and descriptions of the recommended residue methods that are applicable to most oxime carbamates in plant, animal tissue, soil, and water matrices. [Pg.1147]

The recommended technique for the determination of oxime carbamates and their metabolites by HPLC/MS and HPLC/MS/MS is positive ESI. Electrospray is a soft ionization technique and is suitable for thermally labile compounds. Ions are produced in the liquid phase at quasi-ambient temperature and atmospheric pressure, thus leaving the fragile pesticides intact. For oxime carbamates, the molecular adducts that can be monitored during HPLC/MS analysis with electrospray in positive mode are [M- -H]+, [M- -Na]+, or [M- -NH4]+, depending on the nature of mobile phase used. ... [Pg.1148]

For HPLC/MS/MS analysis, a triple-quadrupole mass spectrometer with an electrospray interface is recommended for achieving the best sensitivity and speciflcity in the quantitative determination of oxime carbamates and their metabolites. This allows... [Pg.1148]

A complete post-column LC system for the analysis of oxime carbamates using this approach is commercially available (Pickering Laboratories). Alternative post-column hydrolysis conditions 50 X 4.0-mm i.d., 15 p.m, Aminex A-27 column (Bio-Rad), 120°C. [Pg.1150]

Oxime carbamates are generally applied either directly to the tilled soil or sprayed on crops. One of the advantages of oxime carbamates is their short persistence on plants. They are readily degraded into their metabolites shortly after application. However, some of these metabolites have insecticidal properties even more potent than those of the parent compound. For example, the oxidative product of aldicarb is aldicarb sulfoxide, which is observed to be 10-20 times more active as a cholinesterase inhibitor than aldicarb. Other oxime carbamates (e.g., methomyl) have degradates which show no insecticidal activity, have low to negligible ecotoxicity and mammalian toxicity relative to the parent, and are normally nondetectable in crops. Therefore, the residue definition may include the parent oxime carbamate (e.g., methomyl) or parent and metabolites (e.g., aldicarb and its sulfoxide and sulfone metabolites). The tolerance or maximum residue limit (MRL) of pesticides on any food commodity is based on the highest residue concentration detected on mature crops at harvest or the LOQ of the method submitted for enforcement purposes if no detectable residues are found. For example, the tolerances of methomyl in US food commodities range from 0.1 to 6 mg kg for food items and up to 40 mg kg for feed items. ... [Pg.1153]

The first recommended soil method for oxime carbamates is the method of Honing et al. by HPLC/MS. The LOQ of the method, specifically for aldicarb, methomyl, and oxamyl, is 0.05mgkg. Soil (lOg) is Soxhlet extracted for 16h with acetone-dichloromethane (1 1) using double-thickness cellulose extraction thimbles (80 X 22-mm i.d.). Prior to extraction, the Soxhlet system and the thimbles are cleaned for 14 h by refluxing with methanol. The extracts are removed and concentrated nearly to dryness in a rotary evaporator operating at 35 °C evaporation to dryness... [Pg.1158]

Oxime carbamates are generally stable in aqueous solutions at pH 4-6. Their chemical degradation (hydrolysis) in water depends strongly on pH. Strongly basic conditions... [Pg.1159]

The European drinking water guidelines set a maximum admissible concentration of 0.10 pgL for individual pesticides and their related compounds in drinking water. The recommended methods for oxime carbamates and their metabolites in groundwater and surface water are suitable for detection limits below 0.10 pgL. The first method is the HPLC/lluorescence multiresidue method of de Kok et al The second method is an HPLC/MS/MS method of DuPont Crop Protection which is specific for oxamyl and may be applicable for the analysis of other oxime carbamates in heavily polluted waters. [Pg.1160]

A sensitive and selective method, which is specific for oxamyl and may be applicable to other oxime carbamates and their metabolites in heavily polluted waters, involves the use of HPLC/MS/MS. A 75-mL reservoir is attached on top of a Bond-Elut SAX (l-g/6-mL) (Varian), which is connected to an Oasis HLB (l-g/20-mL)... [Pg.1160]

Currently, HPLC/fiuorescence is still the most common technique for the determination of residues of oxime carbamates. With the introduction of ESI and APCI MS interfaces, HPLC/MS analysis for oxime carbamates in various sample matrices has become widespread. However, for a rapid, sensitive, and specific analysis of biological and environmental samples, HPLC/MS/MS is preferred to HPLC/MS and HPLC/fiuorescence. With time, improved and affordable triple-quadrupole mass spectrometers will be available in more analytical laboratories. With stricter regulatory requirements, e.g., highly specific and conclusive methods with lower LOQ, HPLC/MS/MS will be a method of choice for oxime carbamates and their metabolites. [Pg.1161]

Alanycarb is an oxime carbamate insecticide with outstanding control of many important Lepidoptera pests of agricultural crops. Major features of this product include mammalian safety, excellent residual activity and absence of phytotoxicity on many agricultural crops... [Pg.1250]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...