Parent materials

The CamuS system is intended to be applied mainly in the field of weld inspection, where it is anticipated that the benefits of the analysis and visualisation facilities will be greatest. The specification for the prototype recognised that the system should be applicable to joints where the parent material is between 6mm and 150mm thick, and where the configuration and geometry of the weld preparation are of the types described in prEN1714 (see Figure 2). [Pg.765]

Many newer poly(phenylene oxide)s have been reported ia the early 1990s. Eor example, a number of poly(2,6-diphenyl-l,4-phenylene oxide)s were prepared with substituents ia the 4-positions of the pendent phenyl groups. Of particular iaterest is the 4-fluoro substitueat, which imparts a lower melting poiat, enhanced solubiUty, and a lesser tendency to crystallize than has been found for the parent material (1). [Pg.326]

There are areas (22) where selenium levels in the soil are very low these include regions of volcanic activity like that adjacent to the Cascade mountains in the Pacific Northwest states of the United States and the central north island of New Zealand. There, because the heat of emption volatilized the selenium, the residual soil parent material is virtually devoid of selenium. Other areas of low soil-selenium reflect leaching of selenium out of the top soil, as in the Canterbury plain on New Zealand s south island. Areas of selenium deficiency have negative implications for animal and human health. [Pg.327]

The induction of systemic toxicity may involve a variety of complex interrelationships between the absorbed parent material, any conversion products, and their concentration and distribution in body tissues and fluids. The general pathway that a material may foUow after its absorption is shown schematically in Eigure 2. [Pg.230]

Parent substances and metaboHtes may be stored in tissues, such as fat, from which they continue to be released following cessation of exposure to the parent material. In this way, potentially toxic levels of a material or metaboHte may be maintained in the body. However, the relationship between uptake and release, and the quantitative aspects of partitioning, may be complex and vary between different materials. For example, volatile lipophilic materials are generally more rapidly cleared than nonvolatile substances, and the half-Hves may differ by orders of magnitude. This is exemplified by comparing halothane and DDT (see Anesthetics Insectcontholtechnology). [Pg.231]

MetaboHsm is concerned with a deterrnination of the biotransformation of the parent material, the sites at which this occurs, and the mechanism of the biotransformation. [Pg.237]

The results of the study should allow decisions on whether injury is a direct result of toxicity or secondary to other events. In addition to confirming a causal relationship between exposure to the test material and development of an injury, the study should be reviewed in order to assess whether information is available to determine if the effect is traceable to parent material or metaboUte. [Pg.238]

Kaolin most commonly originates by the alteration of feldspar or other aluminum siHcates via an intermediate solution phase (97,98) usuaHy by surface weathering (26,99) or by rising warm (hydrothermal) waters. A mica, or hydrated alumina soHd may form as an intermediate phase during the alteration from parent material to kaolin minerals. [Pg.196]

The condition of any soil represents a stage in the changing process of soil evolution. Soils develop, mature and change with the passage of time. Whereas the time required for a true soil to develop from the parent rock of the earth may be thousands of years, rapid changes can result in a few years when soils are cultivated, irrigated, or otherwise subjected to man s manipulation. The type of soil that develops from the parent material will depend upon the various physical, chemical and biological factors of the environment. [Pg.377]

The weathering process which eventually reduces the rock of the parent material to the inorganic constituents of soil comprises both physical and chemical changes. Size reduction from rocks to the colloidal state depends not only upon the mechanical action of natural forces but also on chemical solubilisation of certain minerals, action of plant roots, and the effects of organic substances formed by biological activity. [Pg.377]

These characteristics always give a weld which has less ductility than the parent material and no method of welding is entirely satisfactory particularly if the joint is to be stressed. [Pg.841]

Welded joints should be ground flush to enable good coating adhesion and performance. In addition, weld metal should be selected such that it is cathodic to the parent material(s) being welded (Fig. 9.23). [Pg.69]

Fig. 9.23 Welded areas of an offshore platform structural tubular displaying premature corrosion due to (a) lack of surface grinding (resulting in poor paint adhesion and performance) and (b) the fact that the weld metal is anodic relative to the parent material of the tubular...

Weld a union between pieces of metal at faces rendered plastic or liquid by heat or by pressure, or by both. A filler metal whose melting temperature is of the same order as that of the parent material may or may not be used. [Pg.106]

Weld strengths are based on destructive testing. 100 + % results indicate that parent material of plastic part g. way while weld remained intact. [Pg.550]

Siloxane containing interpenetrating networks (IPN) have also been synthesized and some properties were reported 59,354 356>. However, they have not received much attention. Preparation and characterization of IPNs based on PDMS-polystyrene 354), PDMS-poly(methyl methacrylate) 354), polysiloxane-epoxy systems 355) and PDMS-polyurethane 356) were described. These materials all displayed two-phase morphologies, but only minor improvements were obtained over the physical and mechanical properties of the parent materials. This may be due to the difficulties encountered in controlling the structure and morphology of these IPN systems. Siloxane modified polyamide, polyester, polyolefin and various polyurethane based IPN materials are commercially available 59). Incorporation of siloxanes into these systems was reported to increase the hydrolytic stability, surface release, electrical properties of the base polymers and also to reduce the surface wear and friction due to the lubricating action of PDMS chains 59). [Pg.62]

Soils that have developed in different environments, or with different parent materials or ages... [Pg.171]

Andisols Andie soil properties (A1 humates, low pH, darkly colored A) Volcanic parent materials... [Pg.173]

Figure 8-5 shows soil orders that form in relation to climate and vegetation along a transect from the poles to the equator along with processes occurring in the soil. In this conceptual diagram, it is assumed that there is a uniform parent material, similar topography and... [Pg.173]

One shortcoming in many field studies is a failure to address adequately exposure to toxic transformation products. In efforts to manage time and cost constraints, the concentrations of parent materials and transformation products are often added together to produce a total toxic residue amount. However, it is more appropriate to evaluate individual transformation products as their toxicity may be significantly increased (e.g. active oxons) or decreased (e.g. dehalogenation or dealkylation products) relative to the parent compound. [Pg.940]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...