Polymer/chemical Interactions

The use of CP-coated electrodes for metal electrodeposition, instead of the typical conducting (metal, glassy carbon etc.) substrates, results in the interference in this process of various specific factors that closely relate to the intrinsic propertiesof CPs. Among them are the initial oxidation state of the CP material, its surface morphology and surface chemical state, and also bulk characteristics, such as porosity and metal-polymer chemical interactions. These factors are often inter-related and therefore it is difficult to differentiate clearly their effect on the characteristics of the obtained metal deposit. [Pg.298]

PLA polymers. First, it describes the main factors that influence polymer/ chemical interactions. Second, it details the basic properties of PLA polymers, and finally it describes the interaction of PLA with gases, vapors, and organic compounds. [Pg.344]

Experimental determinations of polymer/chemical interactions are time consuming and expensive, requiring slow and tedious testing. Therefore, methods to predict affinity and interaction in these systems can reduce testing... [Pg.362]

Viscoelastic polymers essentially dominate the multi-billion dollar adhesives market, therefore an understanding of their adhesion behavior is very important. Adhesion of these materials involves quite a few chemical and physical phenomena. As with elastic materials, the chemical interactions and affinities in the interface provide the fundamental link for transmission of stress between the contacting bodies. This intrinsic resistance to detachment is usually augmented several folds by dissipation processes available to the viscoelastic media. The dissipation processes can have either a thermodynamic origin such as recoiling of the stretched polymeric chains upon detachment, or a dynamic and rate-sensitive nature as in chain pull-out, chain disentanglement and deformation-related rheological losses in the bulk of materials and in the vicinity of interface. [Pg.122]

In an ideal SEC separation, the mechanism is purely sieving, with no chemical interaction between the column matrix and the sample molecules. In practice, however, a small number of weakly charged groups on the surface of all TSK-GEL PW type packings can cause changes in elution order from that of an ideal system. Fortunately, the eluent composition can be varied greatly with TSK-GEL PW columns to be compatible with a wide range of neutral, polar, anionic, and cationic samples. Table 4.8 lists appropriate eluents for GFC of all polymer types on TSK-GEL PW type columns (11). [Pg.111]

Equation (40) relates the lifetime of potential-dependent PMC transients to stationary PMC signals and thus interfacial rate constants [compare (18)]. In order to verify such a correlation and see whether the interfacial recombination rates can be controlled in the accumulation region via the applied electrode potentials, experiments with silicon/polymer junctions were performed.38 The selected polymer, poly(epichlorhydrine-co-ethylenoxide-co-allyl-glycylether, or technically (Hydrine-T), to which lithium perchlorate or potassium iodide were added as salt, should not chemically interact with silicon, but can provide a solid electrolyte contact able to polarize the silicon/electrode interface. [Pg.497]

It has been well established that wear resistance of filled rubber is essentially determined by filler loading, filler morphology, and polymer-filler interaction. For fillers having similar morphologies, an increase in polymer-filler interaction, either through enhancement of physical adsorption of polymer chains on the filler surface, or via creation of chemical linkages between filler and polymer, is crucial to the enhancement of wear resistance. In addition, filler dispersion is also essential as it is directly related to the contact area of polymer with filler, hence polymer-filler interaction. [Pg.945]

Due to its unique chemical composition and structure, DNA can interact with a plethora of chemical structures via numerous types of bonds. This property ultimately defines the ability of DNA fragments to serve as the building blocks in the complex three-dimensional self-assembled structures. Following we Ust four major types of polymer/DNA interactions that can lead to formation of supramolecular structures ... [Pg.433]

PMo 12-polymer composite film catalyst [9]. This demonstrates that PM012 catalyst was not in a crystal state but in an amorphous-like state, indicating that PM012 catalyst was molecularly dispersed on the PS support via chemical interaction. As attempted in this work, it is believed that heteropolyanions (PMoi204o ) were strongly immobilized on the cationic sites of the PS bead as charge-compensating components. [Pg.299]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...