Quantification techniques

Historically, measurements have classified ambient hydrocarbons in two classes methane (CH4) and all other nonmethane volatile organic compounds (NMVOCs). Analyzing hydrocarbons in the atmosphere involves a three-step process collection, separation, and quantification. Collection involves obtaining an aliquot of air, e.g., with an evacuated canister. The principal separation process is gas chromatography (GC), and the principal quantification technique is wdth a calibrated flame ionization detector (FID). Mass spectroscopy (MS) is used along with GC to identify individual hydrocarbon compounds. [Pg.202]

In addition, the chapter will provide an overview of htunan reliability quantification techniques, and the relationship between these techniques and qualitative modeling. The chapter will also describe how human reliability is integrated into chemical process quantitative risk assessment (CPQRA). Both qualitative and quantitative techniques will be integrated within a framework called SPEAR (System for Predictive Error Analysis and Reduction). [Pg.202]

All quantification techniques follow the same four basic stages ... [Pg.225]

This technique is the longest established of all the human reliability quantification methods. It was developed by Dr. A. D. Swain in the late 1960s, originally in the context of military applications. It was subsequently developed further in the nuclear power industry. A comprehensive description of the method and the database used in its application, is contained in Swain and Guttmann (1983). Further developments are described in Swain (1987). The THERP approach is probably the most widely applied quantification technique. This is due to the fact that it provides its own database and uses methods such as event trees which are readily familiar to the engineering risk analyst. The most extensive application of THERP has been in nuclear power, but it has also been used in the military, chemical processing, transport, and other industries. [Pg.227]

The SLIM technique is a highly flexible method that allows considerable freedom in performing what-if analyses. In common with most human reliability quantification techniques, it requires defensible data, preferably from a plant environment, to be effective. In the absence of such data, the calibration values have to be generated by expert judgments made by experienced plant personnel. [Pg.239]

Some examples of major quantification techniques have been provided, together with case studies illustrating their application. It must be recognized that quantification remains a difficult area, mainly because of the limitations of data, which will be discussed in Chapter 6. However, the availability of a... [Pg.241]

Appendix IV contains a thorough discussion of quantification techniques and engineering studies of common mode failures. Large LOCA, small LOCA, and transient sequences are considered. [Pg.125]

Simple molecular design to avoid the production of complex metabohtes that may interfere with detection and quantification techniques. [Pg.36]

Once determined, the concentration (as determined above) is multiplied by the response factor. This quantification technique is used when the primary objective is to evaluate treatment effects on lipid oxidation, and greater accuracy is desired. [Pg.533]

Although at present these biosensors cannot be considered as an accurate quantification technique, the applicability as tools for a first and extremely useful screening of the toxicity of real environmental samples is demonstrated. The simplicity of both the biosensor construction and the electrochemical measurement, together with the electrode disposability and the sufficient sensitivity, make the amperometric biosensors attractive for routine analysis, even at home. [Pg.347]

Isotope dilution is usually the most accurate and most sensitive quantification technique when sample size is limited. It has in recent years even been used in certifying the compositions of reference materials [2]. The use of isotope dilution mass spectrometry in the standard reference materials program of the National... [Pg.223]

In addition, a secondary screening HT method is well suited to test the catalytic properties of materials using a parallel flow-through reactor system (i.e. the Multi Fixed Bed Reactor System—MFBR) fitted with parallel detection and quantification techniques by MS and GC [32-35],... [Pg.371]

Applications. The general feasibility of CE to separate immunocomplex from unbound reagent was first demonstrated by Grossman et al. [4] and Nielsen et al. [23], whose reports set the stage for further development of quantification techniques in CE-IA. The first quantitative noncompetitive CE assay of insulin was reported by Schultz and Kennedy [24], To increase the sensitivity of analysis, the authors used FITC-labeled insulin and LIF detection. Due to the separation power of CE, multiple products of fluorescence labeling of insulin did not hamper analysis (see Figure 6). Two types of calibration curves were con-... [Pg.124]

To understand the identification and quantification techniques used to analyse barbiturates and benzodiazepines. [Pg.139]

One major problem with the comparability of toxaphene levels reported from different studies is that different numbers of single toxaphene congeners or technical toxaphene standards have been used as reference for quantitation. In addition, Carlin Jr. et al. found significant differences in the composition of technical toxaphene standards obtained from different suppliers [180]. This causes additional quantification problems. The quantification techniques used at the moment, can be divided into five main approaches ... [Pg.268]

The chirality quantification technique proposed by Harary and Mezey [54,55] is motivated by the Resolution Based Similarity Measure (RBSM) approach used in more general molecular similarity analysis [243]. This method does not rely on a single reference object. Instead, it characterizes shape on any desired finite level of resolution by considering various A(J,n) parts of square lattices, called lattice animals or P(G,n) parts of cubic lattices called polycubes which can be inscribed within the two- or three-dimensional objects J or G, respectively. In the above... [Pg.14]

Here we shall consider a quantification technique of chirality based on the degree of resolution. In the context of RBSM s, one should note that the detection of the presence or the lack of chirality is also resolution-dependent. Although chirality is an absolute property, its detection is not, and this resolution-dependence allows one to introduce a formal scale for chirality. If chirality is already detectable at a low level of resolution, then it is justified to regard the object "more chiral" than another object that reveals its chirality only at a much higher level of resolution. [Pg.156]

Comparison of binding to a NIP This technique is commonly used to estimate the imprinting effect and has the benefit of allowing the effect to be estimated based on single component analysis.6,24,30 This in turn allows nonselective quantification techniques to be used such as simple readings of UV-absorbances, emission intensities, or scintillation. The validity of this approach assumes, however, that the NIP is truly... [Pg.180]

This quantification technique was tested on a commercial mixture of known composition, Aroclor 1242. The weight percentages of each homolog class In the Aroclor were determined and compared to approximate values provided by the manufacturer (Table I). Agreement between the determined and manufacturer s values was considered sufficient for this study. [Pg.202]

Each of the mineral identification and quantification techniques mentioned met with varying degrees of success for each individual mineral. However, for ease of application accuracy and reproducibility, and the highest degree of quantification. X-ray analysis was determined to be the best method. Accordingly, the mineral values shown in the tables were obtained by this method. Pyrite was determined using ASTM procedures. [Pg.445]

The rapid expansion of lectin-based applications for the detection and quantification of glycoconjugates has been led by the development of commercially available, purified and chemically derivatized lectins, and in some cases, anti-lectin antibodies. Over 50 purified plant lectins are sold commercially by a number of producers and vendors, with this number growing annually. Equally important is the ease by which investigators can obtain lectins labeled with various fluorescent dyes, haptenic moieties, biotin, and radioactive atoms, as well as conjugated to enzymes and solid-phase supports. These derivatized lectins are useful for either direct or indirect detection and quantification techniques, or for the physical separation of particulate-bound or soluble glycoconjugates. Table 4 lists many of the commercially available lectin reagents and sources. [Pg.427]

Compound Water Volume (1) Solvent (ml) Solvent Exchange Quantification Technique Recovery (%) Ref. [Pg.944]

The purpose of the present study was to identify those volatile compounds which significantly contribute to the seasoning-like note of fenugreek using the approach of sensory directed chemical analysts. Gas chromatography in combination with olfactometry and mass spectrometry have been used as key steps of this approach (18,19). The formation of flavor impact compound(s) was studied in model systems using the quantification technique Isotope Dilution Assay (20, 21) The mechanistic study was based on a hypothetical pathway proposed for the formation of sotolone via thermally induced oxidative deamination of HIL (10). [Pg.145]

Today, CV-AAS, utilizing the unique property of Hg(0) to easily escape from aqueous solutions into the gas phase through aeration, is by far the most common technique for the determination of mercury in biological samples. The CV liberation of mercury from sample solutions is, however, also used in combination with other current quantification techniques, such as AFS, ICP-OES and ICP-MS. [Pg.417]

The intensity of the current produced by analyte ions is relevant in quantification. Limits of detection are improved when fragmentation is reduced or eliminated and the ion current, attributable to the analyte, is present as a single species. For instance, using Cl often improves both detection and quantification limits when compared to El, although the controlled fragmentation used in selected reaction monitoring can also improve detection limits. Fragmentation as it applies to specific quantification techniques for small molecules is discussed in connection with the quadrupole family of instruments (Sections 3.3.3.1 and 3.3.5). Quantification for biopolymers, particularly proteins, is presented in Section 3.5.1.9. [Pg.134]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...