Quantum-Mechanical Models

Still used today, especially in elementary textbooks, a more sophisticated (and complex) model — the quantum mechanical model — is used much more frequently. [Pg.40]

The simple Bohr model was unable to explain observations made on complex atoms, so a more complex, highly mathematical model of atomic structure was developed — the quantum mechanical model. [Pg.40]

This model is based on quantum theory, which says matter also has properties associated with waves. According to quantum theory, it s impossible to know the exact position and momentum (speed and direction) of an electron at the same time. This is known as the Uncertainty Principle. So scientists had to replace Bohr s orbits with orbitals (sometimes called electron clouds), volumes of space in which there is likely to be an electron. In other words, certainty was replaced with probability. [Pg.40]

The qu mtum mechanical model of the atom uses complex shapes of orbitals rather than Bohr s simple circular orbits. Without resorting to a lot of math (you re welcome), this section shows you some aspects of this newest model of the atom. [Pg.40]

Four numbers, called quantum numbers, were introduced to describe the characteristics of electrons and their orbitals. You ll notice that they were named by totally top-rate techno-geeks [Pg.40]

Molecular spectroscopy offers a fiindamental approach to intramolecular processes [18, 94]. The spectral analysis in temis of detailed quantum mechanical models in principle provides the complete infomiation about the wave-packet dynamics on a level of detail not easily accessible by time-resolved teclmiques. [Pg.2141]

Chapter 2 we worked through the two most commonly used quantum mechanical models r performing calculations on ground-state organic -like molecules, the ab initio and semi-ipirical approaches. We also considered some of the properties that can be calculated ing these techniques. In this chapter we will consider various advanced features of the ab Itio approach and also examine the use of density functional methods. Finally, we will amine the important topic of how quantum mechanics can be used to study the solid state. [Pg.128]

SpartanView models provide information about molecular energy dipole moment atomic charges and vibrational frequencies (these data are accessed from the Properties menu) Energies and charges are available for all quantum mechanical models whereas dipole moments and vibrational frequencies are provided for selected models only... [Pg.1265]

A final important area is the calculation of free energies with quantum mechanical models [72] or hybrid quanmm mechanics/molecular mechanics models (QM/MM) [9]. Such models are being used to simulate enzymatic reactions and calculate activation free energies, providing unique insights into the catalytic efficiency of enzymes. They are reviewed elsewhere in this volume (see Chapter 11). [Pg.196]

A new parametric quantum mechanical model AMI (Austin model 1), based on the NDDO approximations, is described. In it the major weakness of MNDO, in particular the failure to reproduce hydrogen bonds, have been overcome without any increase in eoraputer time. Results for 167 molecules are reported. Parameters are currently available for C, H, O and N. [Pg.153]

I have deliberately restricted the discussion to quantum-mechanical models, so molecular mechanics is excluded from the classification. [Pg.173]

What the authors did was to combine a MM potential for the solvent with an early (MINDO/2) quantum-mechanical model for the solute. Perhaps because of the biological nature of the journal, the method did not become immediately popular with chemists. By 1998, such hybrid methods had become sufficiently well known to justify an American Chemical Society ACS Symposium (Gao and Thompson, 1998). [Pg.261]

In their original paper, Warshel and Levitt used MINDO/2 to treat the quantum-mechanical part of the system. Since then, different authors have tried all the most popular quantum-mechanical models. The quantum-mechanical part of the model tends to dominate resource consumption. [Pg.263]

How are the electrons distributed in an atom You might recall from your general chemistry course that, according to the quantum mechanical model, the behavior of a specific electron in an atom can be described by a mathematical expression called a wave equation—the same sort of expression used to describe the motion of waves in a fluid. The solution to a wave equation is called a wave function, or orbital, and is denoted by the Greek letter psi, i/y. [Pg.4]

Qiana, structure of, 836 Quantum mechanical model, 4-6 Quartet (NMR), 460 Quaternary ammonium salt. 917 Hofmann elimination and, 936-937... [Pg.1313]

Quantum mechanical model, 138-139 Quantum number A number used to describe energy levels available to electrons in atoms there are four such numbers, 140-142,159q electron spin, 141 orbital, 141... [Pg.695]

We are now ready to build a quantum mechanical model of a hydrogen atom. Our task is to combine our knowledge that an electron has wavelike properties and is described by a wavefunction with the nuclear model of the atom, and explain the ladder of energy levels suggested by spectroscopy. [Pg.145]

In contrast to the classic conducting polymers such as PPy, PTh, PP or PA, structural analyses of other systems are few and far between and limited for the most part to quantum mechanical model calculations on the formation of an ideal polymer structu-... [Pg.16]

Whether the Bohr atomic model or the quantum mechanical model is introduced to students, it is inevitable that they have to learn, among other things, that (i) the atomic nucleus is surrounded by electrons and (ii) most of an atom is empty space. Students understanding of the visual representation of the above two statements was explored by Harrison and Treagust (1996). In the study, 48 Grade 8-10... [Pg.61]

Dixon et al. [75] use a simple quantum mechanical model to predict the rotational quantum state distribution of OH. As discussed by Clary [78], the component of the molecular wave function that describes dissociation to a particular OH rotational state N is approximated as... [Pg.259]

Doyen [158] was one who theoretically examined the reflection of metastable atoms from a solid surface within the framework of a quantum- mechanical model based on the general properties of the solid body symmetry. From the author s viewpoint the probability of metastable atom reflection should be negligibly small, regardless of the chemical nature of the surface involved. However, presence of defects and inhomogeneities of a surface formed by adsorbed layers should lead to an abrupt increase in the reflection coefficient, so that its value can approach the relevant gaseous phase parameter on a very inhomogeneous surface. [Pg.326]

A new and accurate quantum mechanical model for charge densities obtained from X-ray experiments has been proposed. This model yields an approximate experimental single determinant wave function. The orbitals for this wave function are best described as HF orbitals constrained to give the experimental density to a prescribed accuracy, and they are closely related to the Kohn-Sham orbitals of density functional theory. The model has been demonstrated with calculations on the beryllium crystal. [Pg.272]

PALS is based on the injection of positrons into investigated sample and measurement of their lifetimes before annihilation with the electrons in the sample. After entering the sample, positron thermalizes in very short time, approx. 10"12 s, and in process of diffusion it can either directly annihilate with an electron in the sample or form positronium (para-positronium, p-Ps or orto-positronium, o-Ps, with vacuum lifetimes of 125 ps and 142 ns, respectively) if available space permits. In the porous materials, such as zeolites or their gel precursors, ort/zo-positronium can be localized in the pore and have interactions with the electrons on the pore surface leading to annihilation in two gamma rays in pick-off process, with the lifetime which depends on the pore size. In the simple quantum mechanical model of spherical holes, developed by Tao and Eldrup [18,19], these pick-off lifetimes, up to approx. 10 ns, can be connected with the hole size by the relation ... [Pg.42]

Quantum mechanical models at different levels of approximation have been successfully applied to compute molecular hyperpolarizabilities. Some authors have attempted a complete determination of the U.V. molecular spectrum to fill in the expression of p (15, 16). Another approach is the finite-field perturbative technique (17) demanding the sole computation of the ground state level of a perturbated molecule, the hyperpolarizabilities being derivatives at a suitable order of the perturbed ground state molecule by application of the Hellman-Feynman theorem. [Pg.87]

J. Tomasi, B. Menucci, R. Cammi, and M. Cossi, Quantum mechanical models for reactions in solutions, in Computational Approaches to Biochemical Reactivity, G. N ray-Szab6 and A. Warshel, eds., Kluwer, Dordrecht (1997) pp. 1-102. [Pg.92]

To circumvent problems associated with the link atoms different approaches have been developed in which localized orbitals are added to model the bond between the QM and MM regions. Warshel and Levitt [17] were the first to suggest the use of localized orbitals in QM/MM studies. In the local self-consistent field (LSCF) method the QM/MM frontier bond is described with a strictly localized orbital, also called a frozen orbital [43]. These frozen orbitals are parameterized by use of small model molecules and are kept constant in the SCF calculation. The frozen orbitals, and the localized orbital methods in general, must be parameterized for each quantum mechanical model (i.e. energy-calculation method and basis set) to achieve reliable treatment of the boundary [34]. This restriction is partly circumvented in the generalized hybrid orbital (GHO) method [44], In this method, which is an extension of the LSCF method, the boundary MM atom is described by four hybrid orbitals. The three hybrid orbitals that would be attached to other MM atoms are fixed. The remaining hybrid orbital, which represents the bond to a QM atom, participates in the SCF calculation of the QM part. In contrast with LSCF approach the added flexibility of the optimized hybrid orbital means that no specific parameterization of this orbital is needed for each new system. [Pg.165]

See also in sourсe #XX -- [ Pg.132 ]

See also in sourсe #XX -- [ Pg.369 , Pg.370 , Pg.371 ]

See also in sourсe #XX -- [ Pg.4 , Pg.5 ]

See also in sourсe #XX -- [ Pg.4 , Pg.5 ]

See also in sourсe #XX -- [ Pg.35 ]

See also in sourсe #XX -- [ Pg.285 , Pg.300 , Pg.301 , Pg.302 , Pg.303 , Pg.304 , Pg.305 , Pg.306 , Pg.307 , Pg.308 ]

See also in sourсe #XX -- [ Pg.40 , Pg.41 , Pg.42 , Pg.43 ]

See also in sourсe #XX -- [ Pg.92 ]

See also in sourсe #XX -- [ Pg.4 , Pg.6 ]

See also in sourсe #XX -- [ Pg.3 , Pg.4 ]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...