Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Radioactive and Mixed Waste

Sulfur polymer cement shows promise as an encapsulation and stabilization agent for use with low level radioactive and mixed wastes. Use of SPC allows accommodation of larger percentages of waste than PCC. As of this writing (1997), SPC-treated waste forms have met requirements of both the Nuclear Regulatory Commission (NRC) and the Environmental Protection Agency (EPA). [Pg.126]

Molten salt oxidation (MSO) is an ex situ noncombustion thermal treatment technology. MSO technology is under development for hazardous, radioactive, and mixed wastes (wastes with... [Pg.800]

Perma-Fix Environmental Services, Inc. (Perma-Fix), has developed the Perma-Fix Process for the neutralization and stabilization of hazardons, radioactive, and mixed wastes. The Perma-Fix Process is a two-step treatment involving proprietary chemical treatment of wastes followed by the addition of stabilization chemicals to create a final waste form with the hazardous component of the wastes neutrahzed. The technology has been used commercially for several years. [Pg.859]

Trussed, S. Batchelor, B. 1996. Chemical characterization of pore water of a solidified hazardous waste. In Gilliam, T. M. Wiles, C, C. (eds) Stabilization/Solidification of Hazardous, Radioactive and Mixed Wastes. ASTM,... [Pg.605]

Radioactive and Mixed Waste—Risk as a Basis for Waste... [Pg.59]

DORNSIFE, W.P. (1995). Practical applications of a risk-based waste classification system, pages 113 to 145 in Radioactive and Mixed Waste—Risk as a Basis for Waste Classification, NCRP Symposium Proceedings No. 2 (National Council on Radiation Protection and Measurements, Bethesda, Maryland). [Pg.383]

NRC (1994a). U.S. Nuclear Regulatory Commission. Guidance to hazardous, radioactive and mixed waste generators on the elements of a waste minimization program, Information Notice No. 94-23 (U.S. Nuclear Regulatory Commission, Rockville, Maryland). [Pg.396]

SC 64-22 Design of Effective Effluent and Environmental Monitoring Programs SC 64-23 Cesium in the Environment SC 72 Radiation Protection in Mammography SC 85 Risk of Lung Cancer from Radon SC 87 Radioactive and Mixed Waste... [Pg.404]

Isenburg J, Moore M (1992) Generalized acid neutralization capacity test. In Gilliam TM, Wiles CC (eds) Stabilization and solidification of hazardous, radioactive, and mixed wastes, vol 2. ASTM STP 1123, American Society for Testing and Materials, Philadelphia, pp 361-377... [Pg.188]

Regulatory Definition of Hazardous, Radioactive, and Mixed Waste. Existing federal regulations give specific regulatory definitions for all waste types. Wastes that are of most Interest to environmental restoration and waste management are hazardous waste, radioactive waste, and mixed waste. [Pg.10]

MEPAS allows the user to prioritize hazardous, radioactive, and mixed-waste sites, based on their potential hazard to public health. MEPAS is applicable to a wide range of environmental management and regulatory conditions including inactive sites under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), and active sites releasing air and water contaminants regulated under other statutory acts. [Pg.200]

Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes... [Pg.413]

Caldwell RJ,Stegmann JA,Chao CC (1994) Ultrasonic agitation method for accelerated batch leaching tests. In Proc 3rd Int Symp on Stabilization/Solidification of Hazardous, Radioactive and Mixed Wastes, Williamsburg, VA,ASTM, Philadelphia, PA, p 423... [Pg.177]

RMWMF Radioactive and Mixed Waste Management Facility... [Pg.24]

The closest technical area to TA-V and the HCF is TA-lll. TA-III facilities embrace extensive test facilities (sled tracks, centrifuges, and a radiant heat facility). TA-III also encompasses the inactive chemical, mixed, and low-level waste landfills, the Melting and Solidification Laboratory (MSL), and the Radioactive and Mixed Waste Management Facility (RMWMF). [Pg.35]

Radioactive waste is transferred to the Radioactive and Mixed Waste Management Facility, or to another facility operated by representatives of the ES H Center responsible for radioactive and mixed waste management. Radioactive waste is ultimately shipped for disposai at a disposal site approved by DOE. [Pg.274]

M. Buil, E. Revertegat and J. Oliver, in A Model to the Attack of Pure Water or Undersaturated Lime Solutions on Cement , Stabilization and Solidification of Hazardous, Radioactive, and Mixed Wastes, Vol. 2, STP 1123 (TM. GiUiam and C.C. Wiles, eds.), ASTM, Philadelphia, (1992) 227. [Pg.185]

These units include various types of liquid waste disposal sites, underground tanks, and unplanned release sites. The wastes disposed of in these units include nonhazardous solid, hazardous radioactive, and mixed waste. Section 7.0 describes these waste units in more detail. To comply with CERCLA regulations, the four aggregate areas (100, 200, 300, and 1100) were divided into 78 operable units. Two of these units are located at N Reactor (Figure 6-2). [Pg.242]


See other pages where Radioactive and Mixed Waste is mentioned: [Pg.147]    [Pg.392]    [Pg.639]    [Pg.800]    [Pg.926]    [Pg.954]    [Pg.1061]    [Pg.45]    [Pg.165]    [Pg.177]    [Pg.394]    [Pg.399]    [Pg.266]    [Pg.269]    [Pg.269]    [Pg.269]    [Pg.700]   


SEARCH



Mixed Radioactive and Hazardous Chemical Wastes

Radioactive waste

© 2024 chempedia.info