Reduced reactivity

Substituted Phenols. Phenol itself is used in the largest volume, but substituted phenols are used for specialty resins (Table 2). Substituted phenols are typically alkylated phenols made from phenol and a corresponding a-olefin with acid catalysts (13). Acidic catalysis is frequendy in the form of an ion-exchange resin (lER) and the reaction proceeds preferentially in the para position. For example, in the production of /-butylphenol using isobutylene, the product is >95% para-substituted. The incorporation of alkyl phenols into the resin reduces reactivity, hardness, cross-link density, and color formation, but increases solubiHty in nonpolar solvents, dexibiHty, and compatibiHty with natural oils. [Pg.292]

Chemically the Hquid NaK alloy, usually used as a dispersion and on an inert support, provides more reactive surface area than either potassium or sodium metal alone, thus enhancing the reducing reactivity and permitting reactions to proceed atlower (eg, —12°C) temperatures. NaK alloys are suitable for chemical reactions involving unstable intermediates such as carbanions and free radicals. [Pg.519]

Multifunctional Hydroxy, Mercapto, and Amino Compounds. These are used to cross-link halogenated polymers. Depending on the labihty of the halogen, the cross-linking agents can be capped to reduce reactivity or used in combination with accelerators to increase the rate of reaction. Benzoyl capping is common with hydroxy and mercapto compounds forming the carbamate by reaction with one equivalent of carbon dioxide is used with diamines. [Pg.225]

Metallacycle fomiation has also been observed in bis-Cp complexes. Heating Cp 2UR[P(Si(CH2)2)2] (R = Cl [146840-37-17, CH [146840-39-3]) results in the metaHation of the phosphido ligand. These complexes are stmcturaHy similar to the group 4 and 6 transition-metal metallacycle complexes, but show a dramatically reduced reactivity. [Pg.334]

Lithium Hypochlorite. High purity, anhydrous lithium hypochlorite [13840-33-0] LiOCl, is a white, lightweight, dusty, hygroscopic, and corrosive powder. The monohydrate is free-flowing, nondusty, and of reasonable density. The presence of diluents such as salt, sodium, and potassium sulfates reduces dustiness, increases bulk density, reduces reactivity, and improves storage stabiUty. The commercial product is marketed in this form. [Pg.473]

Modification of the amine with acrylonitrile results in hardeners with reduced reactivity. [Pg.754]

Reductions by NaBKt are characterized by low enthalpies of activation (8-13kcal/mol) and large negative entropies of activation (—28 to —40eu). Aldehydes are substantially more reactive than ketones, as can be seen by comparison of the rate data for benzaldehyde and acetophenone. This relative reactivity is characteristic of nearly all carbonyl addition reactions. The reduced reactivity of ketones is attributed primarily to steric effects. Not only does the additional substituent increase the steric restrictions to approach of the nucleophile, but it also causes larger steric interaction in the tetrahedral product as the hybridization changes from trigonal to tetrahedral. [Pg.471]

The numerical value of hardness obtained by MNDO-level calculations correlates with the stability of aromatic compounds. The correlation can be extended to a wider range of compounds, including heterocyclic compounds, when hardness is determined experimentally on the basis of molar reffactivity. The relatively large HOMO-LUMO gap also indicates the absence of relatively high-energy, reactive electrons, in agreement with the reduced reactivity of aromatic compounds toward electrophilic reagents. [Pg.512]

In certain niche applications, aliphatic isocyanates, such as isophorone diisocyanate (IPDI), hexamethylene diisoeyanate (HDI), methylene 4,4 -biscyclo-hexylisocyanate (H12MDI), and polymeric versions of these diisocyanates, are used, e.g., in instances where light stability or reduced reactivity is needed. These isocyanates usually cost more than the aromatic diisocyanates. Thus, they are used in adhesive areas that can Justify the higher costs. [Pg.767]

Occasionally, a phenol may have more than one substituent on the ring before alkylation with aldehyde. If the groups are meta to one another and activating, they will enhance the electron density of the same ring positions and reinforce one another. If they are ortho or para to one another, they may increase or reduce reactivity, depending on the nature of the groups. The most common... [Pg.881]

These two experiments make a number of important points. An <7-HMP will not react with an ortho position as long as a para reaction site is available. A p-HMP will react with unoccupied ortho position at about half the rate that it reacts with a substituted para position. This suggests that there is something special about the repulsion between the phenolic hydroxyls. Since the pH was only 8, it is clear that there was ample opportunity for a salted 2-HMP to find and react with an unsalted 2-HMP. Both species were present. On this basis, we cannot invoke repulsion of like-charged ions. According to Jones salted species probably react with unsalted species and this is one reason that reaction rate drops rapidly when PF pH gets much above 9.0 [147]. Yet the phenolic hydroxyl appears to be the cause of the reduced reactivity of the ortho position. Unfortunately, Jones did much of his work in a carbonate buffer. He did not realize the pH-dependent accelerating effects of carbonate on PF condensation. [Pg.909]

The selective protection of the 17-ketone is difficult to achieve in the presence of other carbonyl groups on account of the reduced reactivity of cyclopent-anones as compared to cyclohexanones. On the other hand, cleavage of a... [Pg.397]

Pertiaps the most obvious experiment is to compare the rate of a reaction in the presence of a solvent and in the absence of the solvent (i.e., in the gas phase). This has long been possible for reactions proceeding homolytically, in which little charge separation occurs in the transition state for such reactions the rates in the gas phase and in the solution phase are similar. Very recently it has become possible to examine polar reactions in the gas phase, and the outcome is greatly different, with the gas-phase reactivity being as much as 10 greater than the reactivity in polar solvents. This reduced reactivity in solvents is ascribed to inhibition by solvation in such reactions the role of the solvent clearly overwhelms the intrinsic reactivity of the reactants. Gas-phase kinetic studies are a powerful means for interpreting the reaction coordinate at a molecular level. [Pg.385]

The traditional means of assessment of the sensitivity of radical reactions to polar factors and establishing the electrophilicity or nucleophilieity of radicals is by way of a Hammett op correlation. Thus, the reactions of radicals with substituted styrene derivatives have been examined to demonstrate that simple alkyl radicals have nucleophilic character38,39 while haloalkyl radicals40 and oxygcn-ccntcrcd radicals " have electrophilic character (Tabic 1.4). It is anticipated that electron-withdrawing substituents (e.g. Cl, F, C02R, CN) will enhance overall reactivity towards nucleophilic radicals and reduce reactivity towards electrophilic radicals. Electron-donating substituents (alkyl) will have the opposite effect. [Pg.21]

First of all, the reaction pathways shown in Scheme 1 involve the formation of charge transfer complexes (CTC) between olefin and Br2- The formation of molecular complexes during olefin bromination had been hypothesized often (ref. 2), but until 1985, when we published a work on this subject (ref. 3), complexes of this type had been observed only in a very limited number of circumstances, all of which have in common a highly reduced reactivity of the olefm-halogen system, i.e. strongly deactivated olefins (ref. 4), or completely apolar solvents (ref. 5) or very low temperatures (ref 6). [Pg.129]

The reactivity of the Cp (L)Ir=PMes (L=PPh3, CO) phosphinidene complexes is much less diverse than those with Zr. Only the formation of phosphaalkenes has been observed in the reaction with CH2I2 and CHI3 [102]. This reduced reactivity of the Ir complexes as compared to Zr complex 53 has been... [Pg.114]

Alkyl and aryllithium compounds have been found to undergo 1,4-addition with the salts of a, (3-unsaturated acids.328 This result reflects the much reduced reactivity of the carboxylate carbonyl group as an electrophile. [Pg.197]

Sodium borohydride is sometimes used in conjunction with CeCl3 (Luche s reagent).70 The active reductants under these conditions are thought to be alkoxyborohydrides. Sodium cyanoborohydride is a useful derivative of sodium borohydride.71 The electron-attracting cyano substituent reduces reactivity and only iminium groups are rapidly reduced by this reagent. [Pg.399]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...