Safety inspections tools

The second type of monitoring Sis are constructed from tools such as (safety) inspections, and (safety) observational programmes. These tools are numerous, van Steen (van Steen, 1996) amongst others provides an overview of many different technical and human based inspections utilized by different companies in the chemical process industry. The aim of this type of tool is to check the presence and effectiveness of technical and human safety measures. This safe way of working is compared with standards (technical and human) and expert opinion to indicate... [Pg.46]

Weeki Discuss location of safety lock, tags and procedures Demonstrate correct lifting Inspect tools for damage or worn surfaces Review an HMIS label on a product in your cell... [Pg.115]

Internal safety system audits should take place every 6 months by a trained team of internal accredited auditors. The audit is not merely a safety inspection. A safety audit provides the means for a systematic analysis of each elanent of a loss prevention program to determine the extent and quality of the controls. It is a critical examination of all, or part, of a total safety operating system, and it is a management tool that measures the overall operating effectiveness of a company s safety and health program. [Pg.86]

The point is, how pre-trip inspections of your vehicles are performed should not be left up to an individual driver s judgement — this is leaving your safety results to chance, and is not an effective safety management tool. [Pg.411]

A management tool used to measure the effectiveness and efficiency of the implementation of safety policy, programs, and procedures by subjecting each area of an activity to a systematic critical examination with the purposes of minimizing loss, and providing a quantified assessment of performance and actions needed to render identified hazards harmless. See also Safety Inspection. [Pg.40]

Periodic, scheduled facility safety inspections are essential in any operational area, especially where hazardous tasks are performed on a regular basis. Compliance with safety inspection requirements should not be difficult to accomplish since similar requirements should already exist in an established occupational safety program. The facility inspection encompasses all facets of daily operation and considers the human-machine interface a primary candidate area for potential mishaps. Frequent facility inspections are an excellent method of maintaining current awareness of facility conditions and how those conditions affect, or might affect, the safe operation of that facility. A system should be in place to ensure implementation of corrective actions and to track repetitive items. Results of inspections should be properly documented and accountability for discrepant items appropriately determined and assigned in order for the inspection process to be effective. If properly performed, the facility safety inspection is an excellent tool in the overall success of the system safety function. [Pg.33]

Review appropriate safety procedures and PPE considerations. Inspect tools and ensure all PPE meets safety standards. [Pg.68]

Internal safety inspections are important features in good safety practice. In daily production tasks, it is not always possible to detect all safety deficiencies. It is also well known that experienced employees can be too familiar with their work to note even imminent dangers. Regular walk-through surveys are therefore required. Safety checks may be conducted weekly, monthly or with some other level of frequency, depending on local risk conditions. It is usually advisable to use a checklist form appropriate to the plant, in order to conduct a systematic consideration of all of the relevant hazards. In the case of advanced safety inspection routines documented and issued using company systems, there is also a communication tool and checkout for the implementation of corrective measures by management. [Pg.14]

As with other safety analysis tools, the facility hazard analysis should be performed as early in the program as feasible. The same hazard analysis format can be used, with the columns filled in with preliminary or available information. The facility hazard analysis should be revisited at the 30%, 60%, 90%, and 100% design review stages, updating the worksheets as information becomes available. When the acceptance inspection and operations review is conducted, the facility hazard analysis should again be updated. The same holds for facilities that are modified or retrofitted. [Pg.164]

Periodic Safety Inspections (PSI) which from their conception are carried out on the basis of an approach oriented to safety objectives are essential tools for integral plant safety evaluation. The main task of the PSI is to verify in how far the plant corresponds to the state of the art in safety technology. [Pg.156]

The European Directive 2008/96/CE requires member states to establish and implement procedures related to road safety impact assessments, road safely audits, the management of road network safety and safety inspections. In the Directive, great emphasis is given to road Safety Inspections (SI) as an effective tool for the safety management of existing toads stating Once road sections with a high accident concentration have been treated and remedial measures have been taken, safety inspections as a preventive measnre should assume a more important role. [Pg.233]

This short overview is not exhaustive of the whole scenario of tools available to support the safety inspection process at present, but it makes it possible to point out the main advantages and potential for improvement ... [Pg.238]

The design of a new system and software tools for Safety Inspection was based on research, practical experience and lessons learned from existing tools with the aim to maintain their advantages, but also to apply a new comprehensive approach to road network safety management. [Pg.239]

Described as follows are two tools that are used extensively in measuring field compliance the audit and the inspection. I define these two tools as related but different. The main differences between them are in their scope. Many health and safety professionals do not realize or believe that there is a difference between the safety program and the site-specific safety plan. Similarly, many health and safety professionals will not admit to a difference between the safety inspection and safety audit, but there is a difference—and the difference is substantial. Safety inspections, and why these safety inspections are important, is discussed in the following section. After completing the discussion on safety inspections, safety audits are discussed. [Pg.172]

Safety inspections are a valuable tool to aid in determining field compliance. Inspections can be used to reveal gaps between field activities and safety programs and plans. Safety inspections take place at various levels, including the following ... [Pg.172]

The effective audit will uncover any weakness or noncompliance in the safety-related areas that are being audited. Audits typically get a score, whereas inspections usually do not. Audits are more of a management tool to determine compliance in a general way. Inspections are a tool used by all levels to determine compliance in a specific area (typically and most often physical safety hazards). Management has been baffled when safety inspections continually reveal no deficiencies, yet accident occurrences seem to be prevalent. The use of a comprehensive audit can help eliminate accident occurrences. [Pg.189]

Maintain and inspect tools to prevent safety hazards. [Pg.506]

It is important to assign both authority and specific responsibility to implement each protective measure. A safety engineer may need to provide the training the manager should provide safe tools and equipment and the employees should inspect their tools to ensure that they are in safe condition. [Pg.52]

Data should be collected on the likely conditions of the internals, such as degree of fouling, corrosion, toxicity, and potential troublespots. This information can be gathered from previous inspection reports or by questioning personnel operating similar columns. This information is essential for prepeu ing the proper tools, procedures, work and personnel schedules, and safety equipment. [Pg.262]

The other program mentioned in this section of Act is The Healthy School Environments Assessment Tool (HealthySEATv2). It was adapted from a database tool originally developed by the Los Angeles Unified School District to conduct self-assessment inspections in its approximately nine hundred school facilities and substantially modified by EPA to make it widely available to the more than fourteen thousand school districts nationwide. It is free software that can be customized and helps school districts evaluate and manage their school facilities for key environmental, safety, and health issues. EPA has also included critical elements of all of its regulatory and voluntary... [Pg.655]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...