Semi-Empirical Approaches

Inc, [34], is an example of a software package that can calculate 3D geometries, chemical shifts, and coupling constants using semi-empirical approaches (Figure 10.2-2). [Pg.521]

Unlike the Hiickel and extended Hiickel methods, the semi-empirical approaches that explicitly treat electron-electron interactions give rise to Fock matrix element... [Pg.611]

In this section we aim to introduce some of the main theoretical ideas which underlie the strategies for modelling liquid crystal molecules. It is clear that there are a very wide range of methods available and we will not attempt to be comprehensive. Instead, we will begin with a brief overview of traditional semi-empirical approaches and then progress to concentrate on treating fully predictive parameter-free calculations of molecular electronic structure and properties in some depth. [Pg.15]

In summary, models can be classified in general into deterministic, which describe the system as cause/effect relationships and stochastic, which incorporate the concept of risk, probability or other measures of uncertainty. Deterministic and stochastic models may be developed from observation, semi-empirical approaches, and theoretical approaches. In developing a model, scientists attempt to reach an optimal compromise among the above approaches, given the level of detail justified by both the data availability and the study objectives. Deterministic model formulations can be further classified into simulation models which employ a well accepted empirical equation, that is forced via calibration coefficients, to describe a system and analytic models in which the derived equation describes the physics/chemistry of a system. [Pg.50]

As noted above, many integrals describing electron repulsion are very small in magnitude, especially those such as 4> (1)< jv(1) when p v. The simplest semi-empirical approach, termed the zero-differential overlap (ZDO) approximation, is therefore to assume that these integrals can be ignored. Mathematically expressed, this is equivalent to the following ... [Pg.20]

The simplest theory that is consistent with these requirements employs the complete neglect of differential overlap (CNDO)29. This semi-empirical approach will be discussed in some detail, albeit without extensive mathematical justification, as it illustrates the type of approximations that are made in more advanced theories. In addition to the assumptions outlined above, the remaining Coulomb-type integrals are reduced to a single value -yAB that depends only on the nature of atoms A and B with which < > and t are associated, respectively, and not on the actual type of orbitals that overlap. This is equivalent to stating ... [Pg.20]

We still need much better medicines to cure cancer, heart disease, stroke, and Alzheimer s disease. We need better drugs to deal with obesity, diabetes, arthritis, and schizophrenia. The treatments of diabetes, arthritis, and mental defects such as schizophrenia or manic depression are not yet cures, just ways to keep the symptoms under control. Cures are needed. Insights from genetics may help guide us toward elegant and rational cures, but we will also make use of screens to identify natural products and libraries of randomly generated synthetic compounds (combinatorial chemistry). A semi-empirical approach may be the best hope over the next two decades to yield drugs to alleviate these diseases. [Pg.115]

The term "semi-empirical" has been reserved commonly for electronic-based calculations which also starts with the Schrodinger equation.9-31 Due to the mathematical complexity, which involve the calculation of many integrals, certain families of integrals have been eliminated or approximated. Unlike ab initio methods, the semi-empirical approach adds terms and parameters to fit experimental data (e.g., heats of formation). The level of approximations define the different semi-empirical methods. The original semi-empirical methods can be traced back to the CNDO,12 13 NDDO, and INDO.15 The success of the MINDO,16 MINDO/3,17-21 and MNDO22-27 level of theory ultimately led to the development of AMI28 and a reparameterized variant known as PM3.29 30 In 1993, Dewar et al. introduced SAMI.31 Semi-empirical calculations have provided a wealth of information for practical applications. [Pg.38]

Miedema s model and parameters and prediction of compound formation capability. A semi-empirical approach to the evaluation of the compound formation capability and of the heats of formation of alloys was proposed by Miedema and co-workers. This resulted in a model which became very popular and, especially because there was scarcity of experimental data, was frequently used in the evaluation, even if approximate and several times incorrect, of the formation enthalpies. The model suggested for energy effects in alloys is well known essentially it is based on the definition of two parameters. By assigning two coordinates... [Pg.16]

Finally, the significant progress and the limits of the ab initio, first-principle, calculations (Hafner 1987, 1989, Colinet 2003, Pettifor 2003), and the usefulness of a number of semi-empirical approaches have to be pointed out. Several schemes and criteria have been suggested to forecast and/or optimize the data concerning certain properties. In the following a short outline will be reported on some prediction methods based on selected correlations between elemental properties and structure formation. [Pg.70]

Flooding-point. Because the flooding-point is no longer synonymous with that for spray towers, equations 13.34 and 13.35 predict only the upper transition point. Dell and Pratt 30 1 adopted a semi-empirical approach for the flooding-point by consideration of the forces acting on the separate dispersed and continuous phase channels which form when coalescence sets in just below the flooding-point. The following expression correlates data to within 20 per cent ... [Pg.758]

A Semi-quantitative and Semi-empirical Approach 2.3.1. Constant Polarizabilities... [Pg.94]

Now I should stress that I do not think that it is failure of DFT methods sometimes to get the right answer which is so unsettling, rather it is that not yet can we silways be sure that we are using a functional that is suitable for the problem that we have in hand. Unless we have some way of deciding this, then a DFT approach has some of the same characteristics of general semi-empirical approaches. Namely, one has to establish their utility on a class of problems and one s confidence in the results depends strongly on how closely the problem in hand fits into the relevant class structure. [Pg.6]

Solvent-polymer compatibility problems are often encountered in industry, such as in the selection of gaskets or hoses for the transportation of solvents. A rough guide exists to aid the selection of solvents for a polymer, or to assess the extent of polymer-liquid interactions. A semi empirical approach has been developed by Hildebrand based on the principle of like dissolves like. The treatment involves relating the enthalpy of mixing to a solubility parameter, S, and its related quantity, 8, called the cohesive energy density. [Pg.196]

Andrews et al. (1984) have adopted a semi-empirical approach to the calculation of binding energy. They fix the loss of translational and rotational entropy in any drug-receptor association to be 14 kcal/mol (the Williams ACj+r term) and partition binding energy AG (defined as a -t-ve quantity) according to equation (11) ... [Pg.56]

Bjarnholt and coworkers (Refs 13 and 21) used a semi-empirical approach to estimate the useful energy of HE via underwater expln energy measurements. In essence, their approach involves computation of a shock toss factor, ft > 1, to estimate the shock energy at the HE/water boundary from measured shock energies at some distance from the HE. This is coupled with the assumption that the measured bubble energy at some distance from the HE equals the bubble energy at the HE/water boundary. Then the total underwater expansion work per unit mass of HE, A0, is given by ... [Pg.94]

A useful semi-empirical approach was developed by Kamlet and Jacobs (Ref 2). Since... [Pg.180]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...