Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Site Procedures

PRF—See Plutonium reclamation facility, Hanford site Procedure... [Pg.470]

Comparison of the Efficiency of In-Situ and Off-Site Procedures for Removal of Selected PAHs... [Pg.645]

The parameter values and patterns determined in this section are reasonably linked into adapted versions of data pre-evaluation procedures in order to permit automated pre-processing of complete series of scattering patterns. Novices at synchrotron beamlines will resort to on-site procedures and take home pre-processed data. [Pg.84]

All instruments deemed critical for product quality and safety are calibrated according to approved site procedures. [Pg.627]

Operational and maintenance plans should be prepared for the computer system and its associated measurement and control instrumentation. Operational plan review will focus on system reliability, performance, diagnostic records, instrument and system I/O calibration, and the provision of critical data to support the batch record. Procedures for controlling the system (e.g., system management, security, and process operations) should be reviewed to verify that they are current, in place, and being followed. For each procedure required for the system there should be documented evidence that the relevant operatives have been trained in its use. All procedures must be written and approved according to the site procedures for writing and approving SOPs. [Pg.632]

The Validation Package (both formal documents and raw data) must be securely stored in accordance with site procedures and be readily retrievable. The Validation Package will normally be stored in a centralized site archive/repository. [Pg.118]

Periodically, the CCMC reviews the Excess Chemical Warehouse to assess viability of the products stored and identifies non-viable items for disposal. Excess ehemieals for whieh all redistribution options have been exhausted are also included in this review. The CCMC is responsible for the disposal of all non-viable material from the Excess Chemical Warehouse. Individual site organizations are responsible for the disposal of chemicals, including those determined to be hazardous waste, in accordance with RCRA and state regulations, and site procedures. The Solid Waste Division coordinates waste disposal activities and the Environmental Protection Department provides guidance on waste determination and disposal options. [Pg.121]

Each facility shall develop a site procedure that ... [Pg.202]

Has the patient confirmed his/her identity, site, procedure, and consent ... [Pg.354]

Implement standardized protocols to prevent the occurrence of wrong-site procedures or wrong-patient procedures. [Pg.220]

Site procedures need to follow agreed schedules, using approved equipment and conscientious, trained labour. [Pg.90]

The name of the attendants (buddies) at the entry to the confined space. Suitably trained rescue personnel and equipment must be readily available to respond to the work site. Procedures for summoning the rescue services must be understood by all personnel who will enter the confined space. Communication procedures between entrants and attendants. [Pg.79]

Poor site procedures due to inadequate training and/or supervision,... [Pg.465]

The work site procedures must be specific to that operation. [Pg.245]

See other pages where Site Procedures is mentioned: [Pg.2298]    [Pg.295]    [Pg.609]    [Pg.640]    [Pg.245]    [Pg.926]    [Pg.162]    [Pg.50]    [Pg.112]    [Pg.813]    [Pg.116]    [Pg.3]    [Pg.289]    [Pg.203]    [Pg.321]    [Pg.99]    [Pg.99]    [Pg.666]    [Pg.7]    [Pg.87]    [Pg.54]    [Pg.518]    [Pg.27]   


SEARCH



Force matching procedure sites

Site visitor procedures

Staining procedure for the detection of oxidized sites in polymers

Superfund sites, risk assessment procedures

© 2024 chempedia.info