Standards setting

Reagents conforming to standards set by the American Chemical Society. [Pg.107]

The benefits of alcohol fuels include increased energy diversification in the transportation sector, accompanied by some energy security and balance of payments benefits, and potential air quaUty improvements as a result of the reduced emissions of photochemically reactive products (see Air POLLUTION). The Clean Air Act of 1990 and emission standards set out by the State of California may serve to encourage the substantial use of alcohol fuels, unless gasoline and diesel technologies can be developed that offer comparable advantages. [Pg.420]

The Standard-Setting Process. Settiag USP-NF standards is a continuing, and by no means unilateral, process. The Committee of Revision not only develops monographs for new substances but also continually reviews the monographs, specifications, and testing methods for existing substances. Results are pubHshed in one or more supplements each year. A complete review is done every five years and a revision is pubHshed. [Pg.445]

The Standard-Setting Process. The committee has three main lines of endeavor the improvement of existing limits for impurities, the improvement of present test methods, and the development of specifications and testing methods for additional compounds. [Pg.446]

Paper or documentay standards are written articulations of the goals, quaUty levels, dimensions, or other parameter levels that the standards-setting body seeks to estabhsh. Value standards are a subset of paper standards and usually relate direcdy to society and iaclude social, legal, pohtical, and to a lesser extent, economic and technical factors. Such standards usually result from federal, state, or local legislation. [Pg.17]

In addition to utiHty patents, some countries pubHsh patent documents under different or less stringent standards for patentabiHty and with shorter patent terms. For example, plant patents cover asexually reproduced plants. Design patents cover the decorative aspects of a product. UtiHty models and petty patents cover products with differences from the prior art that need not meet the nonobviousness standards set for utiHty patents. [Pg.45]

Despite the attractions of economic forces driving environmental protection, some cautions and failures have been noted. Firstly, the export of hazardous waste to countries where costs for treatment are lower enhances environmental risks during transport and has the potential for transboundary export in the event of pollution. At the same time, the loss of raw material may deprive the home market of an adequate supply of feedstock for the home-based industry. Secondly, there is considerable scepticism that self-regulation of TBT-based antifoulants could be achieved in a timely manner by the shipping industry. This is an instance where the cost benehts to one industry are born by another commercial sector, notably aquaculture. Thus, protection of the marine environment is likely to be aided by economic factors but the role of government, via taxation and standard setting, is not likely to be usurped. Public education and, in turn, pressure, can promote and support corporate environmentalism. [Pg.90]

Pesticides are potentially poisonous, noxious or polluting substances, and therefore the NRA is responsible for controlling and preventing pesticide pollution of water. Furthermore, the NRA is responsible for ensuring water quality meets standards set in a number of EC Directives, some of which specify values for pesticides. [Pg.44]

Companies experienced in assessing candidate tollers typically have some type of assessment questionnaire used to collect data. The assessment questionnaire is useful because it provides a relatively inexpensive tool to collect a standard set of data. [Pg.23]

Finally, the parametrization of the van der Waals part of the QM-MM interaction must be considered. This applies to all QM-MM implementations irrespective of the quantum method being employed. From Eq. (9) it can be seen that each quantum atom needs to have two Lennard-Jones parameters associated with it in order to have a van der Walls interaction with classical atoms. Generally, there are two approaches to this problem. The first is to derive a set of parameters, e, and G, for each common atom type and then to use this standard set for any study that requires a QM-MM study. This is the most common aproach, and the derived Lennard-Jones parameters for the quantum atoms are simply the parameters found in the MM force field for the analogous atom types. For example, a study that employed a QM-MM method implemented in the program CHARMM [48] would use the appropriate Lennard-Jones parameters of the CHARMM force field [52] for the atoms in the quantum region. [Pg.225]

This first example applies to UK industry in general. The turnover for UK manufacturing industry was in the order of 150 billion in 1990 (Smith, 1990). If the total quality cost for a business was likely to be somewhere in the region of 20%, with failure costs at approximately 50% of the total, it is likely that about 15 billion was wasted in defects and failures. A 10% improvement in failure costs would have released an estimated 1.5 billion into the economy. IBM, the computer manufacturer, estimated that they were losing about 5.6 billion in 1986 owing to costs of non-conformance and its failure to meet quality standards set for its products and... [Pg.10]

The reactivity of a series of hydrocarbons toward oxygen measured under a standard set of conditions can give some indication of the susceptibility of various structural units to autoxidation. Table 12.10 gives the results for a series of hydrocarbons. These data indicate the activating effect of alkyl, vinyl, and phenyl substituents. [Pg.707]

The author s work has included the development of the Sandia Bear and Bertha explosive recovery fixtures, that provide a standardized set of fixtures in which recovery experiments can be routinely carried out at peak shock pressures from 4 to 500 GPa. Shock-induced, mean-bulk temperatures from 50 to 1200°C are achieved with variation in the density of the powder compacts under study. [Pg.151]

Table 3 shows the current health-related national ambient air quality standards set by the EPA as of 1999. Regions that violate these standards may be classified as nonattamment areas by the EPA, and can face sanctions if they do not promulgate pollution control plans that are acceptable to the agency. [Pg.52]

Determine whether the 6,060 cfm at 400°Fand against 1 V2 -in. static pressure can be used to select a fan from the manufacturers tables. The manufacturers tables are prepared in accordance with the industry standard set up by the Air Movement and Control Association. These tables are based on standard air. [Pg.572]

Off the shelf buildings are generally of set modular form designed to a standard set of criteria. The available degree of variation may be limited, but they are perfectly suitable for several industrial uses. [Pg.43]

Swarm has been intentionally designed to include as few ad-hoc assumptions about the design of a complex system as possible, so as to provide a convenient, reliable and standardized set of software tools that can be tailored by researchers to specific systems. [Pg.569]

Different strains of a number of bacterial species can be distinguished by their sensitivity to a collection of phages. Bacteria which can be typed in this way include Stop/ , aureus and Salmonella typhi. The particular strain ol say, Staph, aureus responsible for an outbreak of infection is characterized by the pattern of its sensitivity to a standard set of phages and then possible sources of infection are examined for the presence of that same phage type of Staph, aureus. [Pg.62]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...