Thermoplastics materials

Nylon A class of synthetic fibres and plastics, polyamides. Manufactured by condensation polymerization of ct, oj-aminomonocarboxylic acids or of aliphatic diamines with aliphatic dicarboxylic acids. Also rormed specifically, e.g. from caprolactam. The different Nylons are identified by reference to the carbon numbers of the diacid and diamine (e.g. Nylon 66 is from hexamethylene diamine and adipic acid). Thermoplastic materials with high m.p., insolubility, toughness, impact resistance, low friction. Used in monofilaments, textiles, cables, insulation and in packing materials. U.S. production 1983 11 megatonnes. [Pg.284]

The air-coupled ultrasonic probes are essentially built up by the piezo-composite plate and a front side matching layer, made of air bubbles filled plastic materials. By using a thermoplastic material as matrix material of the composite, the transducer can easily be shaped by heating up, forming and cooling down to realize focusing transducers. Because of the low... [Pg.841]

We noted above that the presence of monomer with a functionality greater than 2 results in branched polymer chains. This in turn produces a three-dimensional network of polymer under certain circumstances. The solubility and mechanical behavior of such materials depend critically on whether the extent of polymerization is above or below the threshold for the formation of this network. The threshold is described as the gel point, since the reaction mixture sets up or gels at this point. We have previously introduced the term thermosetting to describe these cross-linked polymeric materials. Because their mechanical properties are largely unaffected by temperature variations-in contrast to thermoplastic materials which become more fluid on heating-step-growth polymers that exceed the gel point are widely used as engineering materials. [Pg.314]

Hot-Melt Adhesives. Hot-melt adhesives are 100% nonvolatile thermoplastic materials that can be heated to a melt and then appHed as a hquid to an adherend. The bond is formed when the adhesive resolidifies. The oldest example of a hot-melt adhesive is sealing wax. [Pg.235]

Many challenging industrial and military applications utilize polychlorotriduoroethylene [9002-83-9] (PCTFE) where, ia addition to thermal and chemical resistance, other unique properties are requited ia a thermoplastic polymer. Such has been the destiny of the polymer siace PCTFE was initially synthesized and disclosed ia 1937 (1). The synthesis and characterization of this high molecular weight thermoplastic were researched and utilized duting the Manhattan Project (2). The unique comhination of chemical iaertness, radiation resistance, low vapor permeabiUty, electrical iasulation properties, and thermal stabiUty of this polymer filled an urgent need for a thermoplastic material for use ia the gaseous UF diffusion process for the separation of uranium isotopes (see Diffusion separation methods). [Pg.393]

Phase Materials. Phase holograms can be recorded in a large variety of materials, the most popular of which are dichromated gelatin, photopolymers, thermoplastic materials, and photorefractive crystals. Dichromated gelatin and some photopolymers require wet processing, and thermoplastic materials require heat processing. Photorefractive crystals are unique in that they are considered to be real-time materials and require no after-exposure processing. [Pg.160]

Recycling of HDPE. Polyolefins, including HDPE, are the second most widely recycled thermoplastic materials after PET (110). A significant fraction of articles made from HDPE (mostly bottles, containers, and film) are collected from consumers, sorted, cleaned, and reprocessed (110—113). Processing of post-consumer HDPE includes the same operations as those used for virgin resins blow mol ding, injection molding, and extmsion. [Pg.388]

Properties desired in cable insulation and flexible circuit substrate materials include mechanical flexibiUty, fatigue endurance, and resistance to chemicals, water absorption, and abrasion. Both thermoplasts and thermosets are used as cable-insulating materials. Thermoplastic materials possess excellent electrical characteristics and are available at relatively low cost. [Pg.534]

E. C. Bernhardt, ed., Erocessing of Thermoplastic Materials, Reinhold Publishing Corp., New York, 1959. [Pg.145]

ISO 306, Plastics Thermoplastic Materials-Determination of Vicat Softening Temperature, ISO, Geneva, Swit2eiiand, 1987. [Pg.159]

ASTM D3835, Determination of Properties of Thermoplastic Materials by Capillay RJ)eometer, Vol. 8.02, ASTM, Philadelphia, Pa., 1994. [Pg.159]

With the growth in thermoplastic materials replacing more traditional materials such as glass, wood, paper, and metal, the growth rate for... [Pg.69]

In the eady 1920s, experimentation with urea—formaldehyde resins [9011-05-6] in Germany (4) and Austria (5,6) led to the discovery that these resins might be cast into beautiful clear transparent sheets, and it was proposed that this new synthetic material might serve as an organic glass (5,6). In fact, an experimental product called PoUopas was introduced, but lack of sufficient water resistance prevented commercialization. Melamine—formaldehyde resin [9003-08-1] does have better water resistance but the market for synthetic glass was taken over by new thermoplastic materials such as polystyrene and poly(methyl methacrylate) (see Methacrylic polya rs Styrene plastics). [Pg.321]

Aniline—formaldehyde resins were once quite important because of their excellent electrical properties, but their markets have been taken over by newer thermoplastic materials. Nevertheless, some aniline resins are stiU. used as modifiers for other resins. Acrylamide (qv) occupies a unique position in the amino resins field since it not only contains a formaldehyde reactive site, but also a polymerizable double bond. Thus it forms a bridge between the formaldehyde condensation polymers and the versatile vinyl polymers and copolymers. [Pg.322]

Thermoplastics. There are five elastomeric membranes that are thermoplastic. Two materials, chlorinated polyethylene (CPE) and polyisobutylene (PIB), are relatively obscure. Thermoplastic materials can be either heat-fused or solvent-welded. In contrast to Hypalon and uncured EPDM, this abiHty to fuse the membranes together remains throughout the life of the material. However, cleaning of the membrane surface after exposure to weather is required. Correct cleaning procedures for specific membranes are available from the individual manufacturer. [Pg.213]

Urethanes are processed as mbber-like elastomers, cast systems, or thermoplastic elastomers. The elastomer form is mixed and processed on conventional mbber mills and internal mixers, and can be compression, transfer, or injection molded. The Hquid prepolymers are cast using automatic metered casting machines, and the thermoplastic peUets are processed like aU thermoplastic materials on traditional plastic equipment. The unique property of the urethanes is ultrahigh abrasion resistance in moderately high Shore A (75—95) durometers. In addition, tear, tensUe, and resistance to many oUs is very high. The main deficiencies of the urethanes are their resistance to heat over 100°C and that shear and sliding abrasion tend to make the polymers soft and gummy. [Pg.234]

The physical properties of polyurethanes are derived from their molecular stmcture and deterrnined by the choice of building blocks as weU as the supramolecular stmctures caused by atomic interaction between chains. The abiHty to crystalline, the flexibiHty of the chains, and spacing of polar groups are of considerable importance, especially in linear thermoplastic materials. In rigid cross-linked systems, eg, polyurethane foams, other factors such as density determine the final properties. [Pg.343]

Pseudothermoplastic resin systems, which are formed as conventional thermoplastic materials and then cured or postcured in a manner similar to that used for thermosetting resins to enhance high temperature properties. [Pg.35]

Advanced Thermoplastics Materials. Thermoplastics and linear plastics of finite molecular weight that can be fabricated into very complex stmctures by hot melt or injection mol ding are different from the thermoset materials that require cross-linking to build up infinite molecular weight to form network (cross-link) stmctures. Advances in thermoplastic engineering materials include amorphous thermoplastics, crystalline thermoplastics, Hquid crystal thermoplastics, and fluorinated thermoplastics (see Engineering plastics). [Pg.190]

During this period, the ICI laboratories were also making their other great contribution to the range of plastics materials—the product which they marketed as Perspex, poly(methyl methacrylate). As a result of work by two of their chemists, R. Hill and J. W. C. Crawford, it was found that a rigid transparent thermoplastics material could be produced at a commercially feasible cost. The material became invaluable during World War II for aircraft glazing and to a lesser extent in the manufacture of dentures. Today poly(methyl methacrylate) is... [Pg.6]

The discovery and development of polypropylene, the one genuinely new large tonnage thermoplastics material developed since World War II, forms part of what is arguably the most important episode in the history of polymer science. For many years it had been recognised that natural polymers were far more regular in their structure than synthetic polymers. Whilst there had been some improvement in controlling molecular architecture, the man-made materials, relative to the natural materials, were structurally crude. [Pg.8]

In these cases the monomer is converted into polymer, and no side products are formed. This approach is used with the major thermoplastics materials (Figure 2.2) such as polyethylene (a polymer of ethylene), polystyrene (a polymer of styrene) and poly(methyl methacrylate) (a polymer of methyl methacrylate). [Pg.20]

See also in sourсe #XX -- [ Pg.301 ]

See also in sourсe #XX -- [ Pg.417 ]

See also in sourсe #XX -- [ Pg.208 ]

See also in sourсe #XX -- [ Pg.660 ]

See also in sourсe #XX -- [ Pg.208 ]

See also in sourсe #XX -- [ Pg.25 ]

See also in sourсe #XX -- [ Pg.3 ]

See also in sourсe #XX -- [ Pg.14 ]

See also in sourсe #XX -- [ Pg.13 ]

See also in sourсe #XX -- [ Pg.15 , Pg.16 ]

See also in sourсe #XX -- [ Pg.4 ]

See also in sourсe #XX -- [ Pg.175 ]

See also in sourсe #XX -- [ Pg.311 ]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...