Two approaches

In broad terms, there are two approaches to chemical process design ... [Pg.8]

Thus emissions must not exceed levels at which they are considered harmful. There are two approaches to deal with emissions ... [Pg.273]

Modelling of Eddy-Current Interaction with Cracks in the Thin-Skin Regime Two Approaches. [Pg.140]

The aim of this work which enter in a research project on NDT, is to conceive a system of aid for interpretation and taking decisions, on imperfections in metallic fusion welds, we have studied and tested several segmentation techniques based on the two approaches ( contour and regions ). A quantitative analysis will be applied to extract some relatives geometricals parameters. To the sight of these characteristics, a first classification will be possible. [Pg.524]

There are two approaches to explain physical mechanism of the phenomenon. The first model is based on the existence of the difference between the saturated vapor pressures above two menisci in dead-end capillary. It results in the evaporation of a liquid from the meniscus of smaller curvature ( classical capillary imbibition) and the condensation of its vapor upon the meniscus of larger curvature originally existed due to capillary condensation. [Pg.616]

In this section we consider electromagnetic dispersion forces between macroscopic objects. There are two approaches to this problem in the first, microscopic model, one assumes pairwise additivity of the dispersion attraction between molecules from Eq. VI-15. This is best for surfaces that are near one another. The macroscopic approach considers the objects as continuous media having a dielectric response to electromagnetic radiation that can be measured through spectroscopic evaluation of the material. In this analysis, the retardation of the electromagnetic response from surfaces that are not in close proximity can be addressed. A more detailed derivation of these expressions is given in references such as the treatise by Russel et al. [3] here we limit ourselves to a brief physical description of the phenomenon. [Pg.232]

There are two approaches to the kinetics of emulsion flocculation. The first stems from a relationship due to Smoluchowski [52] for the rate of diffusional encounters, or flux ... [Pg.511]

Two approaches of this type, purporting to give absolute surface areas, might be mentioned. Bartell and Flu [19] proposed that the heat of immersion of a powder in a given liquid... [Pg.576]

There are two approaches connnonly used to derive an analytical connection between g(i-) and u(r) the Percus-Yevick (PY) equation and the hypemetted chain (FfNC) equation. Both are derived from attempts to fomi fimctional Taylor expansions of different correlation fimctions. These auxiliary correlation functions include ... [Pg.562]

The generally low chemical, mechanical and thennal stability of LB films hinders their use in a wide range of applications. Two approaches have been studied to solve this problem. One is to spread a polymerizable monomer on the subphase and to polymerize it either before or following transfer to the substrate. The second is to employ prefonned polymers containing hydrophilic and hydrophobic groups. [Pg.2618]

How does one monitor a chemical reaction tliat occurs on a time scale faster tlian milliseconds The two approaches introduced above, relaxation spectroscopy and flash photolysis, are typically used for fast kinetic studies. Relaxation metliods may be applied to reactions in which finite amounts of botli reactants and products are present at final equilibrium. The time course of relaxation is monitored after application of a rapid perturbation to tire equilibrium mixture. An important feature of relaxation approaches to kinetic studies is that tire changes are always observed as first order kinetics (as long as tire perturbation is relatively small). This linearization of tire observed kinetics means... [Pg.2950]

In the more general case of nonsymmetric systems, we have shown that one can use reaction coordinates connecting two different spin-paired anchors. These two approaches should be equivalent We shall show that this is indeed the case by discussing some examples. [Pg.357]

Two approaches to quantify/fQ, i.e., to establish a quantitative relationship between the structural features of a compoimd and its properties, are described in this section quantitative structure-property relationships (QSPR) and linear free energy relationships (LFER) cf. Section 3.4.2.2). The LFER approach is important for historical reasons because it contributed the first attempt to predict the property of a compound from an analysis of its structure. LFERs can be established only for congeneric series of compounds, i.e., sets of compounds that share the same skeleton and only have variations in the substituents attached to this skeleton. As examples of a QSPR approach, currently available methods for the prediction of the octanol/water partition coefficient, log P, and of aqueous solubility, log S, of organic compoimds are described in Section 10.1.4 and Section 10.15, respectively. [Pg.488]

Truncating this series after the first derivative and integrating provides the basis for the hermodynamic integration approach. Moreover, if the Taylor series expansion is continued intil it converges then Equation (11.45) is equivalent to the thermodynamic perturbation brmula, so providing a link between the two approaches. In practice, it is always necessary... [Pg.608]

Two approaches to convergent steroid syntheses are based on the thermal opening of benzocyclobutenes to the o-quinodimethane derivatives (see p. 80 W. Oppolzer, 1978 A) and their stereoselective intramolecular Diels-Alder cyclizations. T, Kametani (1977 B, 1978) obtained (+ )-estradiol in a six-step synthesis. The final Diels-Alder reaction occurred regio- and stereoselectively in almost quantitative yield, presumably because the exo transition state given below is highly favored over the endo state in which rings A and D would stcrically inter-... [Pg.280]

We 11 expand our picture of bonding by introducing two approaches that grew out of the idea that electrons can be described as waves—the valence bond and molecular orbital models In particular one aspect of the valence bond model called orbital hybridization, will be emphasized... [Pg.57]

Although the two approaches differ m respect to the phase m which the synthesis is car ried out the overall strategy is the same m both... [Pg.1136]

The principal semi-empirical schemes usually involve one of two approaches. The first uses an effective one-electron Hamiltonian, where the Hamiltonian matrix elements are given empirical or semi-empirical values to try to correlate the results of calculations with experiment, but no specified and clear mathematical derivation of the explicit form of this one-electron Hamiltonian is available beyond that given above. The extended Hiickel calculations are of this type. [Pg.238]

Two approaches have been used to separate the analyte from its matrix in particulate gravimetry. The most common approach is filtration, in which solid particulates are separated from their gas, liquid, or solid matrix. A second approach uses a liquid-phase or solid-phase extraction. [Pg.263]

Schematic diagrams of two approaches to on-coiumn detection using UV/Vis absorption spectroscopy.

In the previous section we described several internal methods of quality assessment that provide quantitative estimates of the systematic and random errors present in an analytical system. Now we turn our attention to how this numerical information is incorporated into the written directives of a complete quality assurance program. Two approaches to developing quality assurance programs have been described a prescriptive approach, in which an exact method of quality assessment is prescribed and a performance-based approach, in which any form of quality assessment is acceptable, provided that an acceptable level of statistical control can be demonstrated. [Pg.712]

Unsaturated Polyesters. There are two approaches used to provide flame retardancy to unsaturated polyesters. These materials can be made flame resistant by incorporating halogen when made, or by adding some organic halogen compound when cured. In either case a synergist is needed. The second approach involves the addition of a hydrated filler. At least an equal amount of filler is used. [Pg.461]

Two approaches to this equation have been employed. (/) The scalar product is formed between the differential vector equation of motion and the vector velocity and the resulting equation is integrated (1). This is the most rigorous approach and for laminar flow yields an expHcit equation for AF in terms of the velocity gradients within the system. (2) The overall energy balance is manipulated by asserting that the local irreversible dissipation of energy is measured by the difference ... [Pg.109]

As can be seen from Figure 4, LBVs for these components are not constant across the ranges of composition. An iateraction model has been proposed (60) which assumes that the lack of linearity results from the iateraction of pairs of components. An approach which focuses on the difference between the weighted linear average of the components and the actual octane number of the blend (bonus or debit) has also been developed (61). The iadependent variables ia this type of model are statistical functions (averages, variances, etc) of blend properties such as octane, olefins, aromatics, and sulfur. The general statistical problem has been analyzed (62) and the two approaches have been shown to be theoretically similar though computationally different. [Pg.188]

Two approaches have been taken to produce metal-matrix composites (qv) incorporation of fibers into a matrix by mechanical means and in situ preparation of a two-phase fibrous or lamellar material by controlled solidification or heat treatment. The principles of strengthening for alloys prepared by the former technique are well estabUshed (24), primarily because yielding and even fracture of these materials occurs while the reinforcing phase is elastically deformed. Under these conditions both strength and modulus increase linearly with volume fraction of reinforcement. However, the deformation of in situ, ie, eutectic, eutectoid, peritectic, or peritectoid, composites usually involves some plastic deformation of the reinforcing phase, and this presents many complexities in analysis and prediction of properties. [Pg.115]

Deposition of Thin Films. Laser photochemical deposition has been extensively studied, especially with respect to fabrication of microelectronic stmctures (see Integrated circuits). This procedure could be used in integrated circuit fabrication for the direct generation of patterns. Laser-aided chemical vapor deposition, which can be used to deposit layers of semiconductors, metals, and insulators, could define the circuit features. The deposits can have dimensions in the micrometer regime and they can be produced in specific patterns. Laser chemical vapor deposition can use either of two approaches. [Pg.19]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...