Utility selection

Although the composite curves can be used to set energy targets, they are not a suitable tool for the selection of utilities. The grand composite curve is a more appropriate tool for understanding the interface between the process and the utility system4,13 14. It will also be shown in later chapters to be a useful tool to study the interaction between heat-integrated reactors and separators and the rest of the process. [Pg.372]

In other problems, the shape of the grand composite curve away from the pinch could have limited the flowrate. [Pg.373]

When hot utility needs to be at a high temperature and/or provide high heat fluxes, radiant heat transfer is used from combustion of fuel in a furnace. Furnace designs vary [Pg.374]

Solution The first problem is that a different value of A Tmi is required for different matches. The problem table algorithm is easily adapted to accommodate this. This is achieved by assigning A Tmin contributions to streams. If the process streams are assigned a contribution of 5°C and flue gas a contribution of 25°C, then a process/process match has a ATmin of (5 + 5) = 10°C and a process/flue gas match has a ATmin of (5 + 25) = 30°C. When setting up the interval temperatures in the problem table algorithm, the interval boundaries are now set at hot stream temperatures minus their Arm contribution, rather than half the global ATmin. Similarly, boundaries are now set on the basis of cold stream temperatures plus their A Tmin contribution. [Pg.376]

The fuel consumption is now calculated by taking the flue gas from theoretical flame temperature to ambient temperature [Pg.376]

After maximizing heat recovery in the heat exchanger network, those heating duties and cooling duties not serviced by heat recovery must be provided by external utilities. The outer-most layer of the onion model is now being addressed, but still dealing with targets. [Pg.184]

Energy Targets for Heat Exchanger Network and Utilities 185 [Pg.185]

The grand composite curve is obtained by plotting the problem table cascade. A typical grand composite curve is shown in Fig. 6.24. It shows the heat flow through the process against temperature. It should be noted that the temperature plotted here is shifted temperature T and not actual temperature. Hot streams are represented ATn,in/2 colder and cold streams AT iJ2 hotter than they are in practice. Thus an allowance for ATj in is built into the construction. [Pg.185]

The point of zero heat flow in the grand composite curve in Fig. 6.24 is the pinch. The open jaws at the top and bottom represent Hmin and Qcmin, respectively. Thus the heat sink above the pinch and heat source below the pinch can be identified as shown in Fig. [Pg.185]

The Tradeoffs Between Process Changes, Utility Selection, Energy Cost, and Capital Cost... [Pg.323]

When NO destmction efficiencies approaching 90% are required, some form of post-combustion technology appHed downstream of the combustion 2one is needed to reduce the NO formed during the combustion process. Three post-combustion NO control technologies are utilized selective catalytic reduction (SCR) nonselective catalytic reduction (NSCR) and selective noncatalytic reduction (SNCR). [Pg.510]

H. Skistad, Utilizing selective withdrawal in the ventilation of large spaces Select-Vent, in Proceedings of Spacevent 98, Stockholm 1998. [Pg.640]

CA Walton, PM Mullins, AB Amerson. Drug literature utilization selection, evaluation and communication. In CW Blissitt, OL Webb, WF Stanaszek, eds. Clinical Pharmacy Practice. Philadelphia Lea Febiger, 1972, pp. 347-406. [Pg.791]

THE TRADE-OFFS BETWEEN PROCESS CHANGES, UTILITY SELECTION, ENERGY COST AND CAPITAL COST... [Pg.429]

Studies have been made thruout the refining industry in an effort to utilize selected stocks for the production of jet fuels. Basically, this would amount to determining the stability of many stocks, for example, straight run gasolines, distillates, kerosines, alkylate bottoms, and whatever else is available from refinery streams. Those with best heat stability, by laboratory test, could then be blended into jet fuels meeting required... [Pg.519]

Most commercial extraction solvents currently are utilized to produce an improved raffinate. Recently, American Cyanamid announced availability of various dipropio-nitriles which are capable of recovering pure aromatics with exceptional selectivity. Extractive distillation to recover benzene or toluene from petroleum fractions has become an accepted commercial process. The possibilities of utilizing selective adsorption for concentration of aromatics has been receiving serious consideration. [Pg.199]

Only limited successful examples of asymmetric hydrogenation of acrylic acids derivatives have included the use of chiral Rh complexes (Scheme 1.17). The diamino phosphine (28) utilizes selective ligation of the amino unit to a Rh center and also exerts electrostatic interaction with a substrate. Its Rh complex catalyzes enantioselective hydrogenation of 2-methylcinnamic acid in 92% optical yield [116], Certain cationic Rh complexes can attain highly enantioselective hydrogenation of trisubstituted acrylic acids [ 1171. 2-(6 -Methoxynaphth-2 -yl)acrylic acid is hydrogenated by an (.S ..S )-BIPNOR- Rh complex in methanol at 4 atm to give (.S)-naproxen with 98% ee but only in 30% yield [26]. [Pg.23]

One way in which this can be accomplished is through the use of selective monitors Selective UV detection has been demonstrated by, among others, Krstulovic and Brown (2.) at the University of Rhode Island Wheals (12) utilized selective fluorescence monitoring to differentiate peaks Neither of these techniques actually improves resolution they merely simplify the chromatogram either by eliminating peaks or by changing the ratios of overlapping peaks so that they may be determined mathematically The drawback to such a procedure is that either multiple detectors must be used or multiple runs be made to obtain a complete analysis ... [Pg.150]

Utility Selective COX-II Inhibitor with Reduced Gastrointestinal Toxicity... [Pg.149]

Another variant of adhesion-FFF is cellular adhesion chromatography (AC) which can be used to separate cells in a preparative manner. It utilizes selective... [Pg.140]

Utilized selective anisotropic solvent adsorption on specific crystal faces to favour the growth of morphologically polar crystals. Some additional reports of the study of crystal modification and nonlinear optical activity include those on anhydrous and hydrated sodium / -nitrophenolate (Brahadeeswaran et al. 1999), derivatives of 2-benzylideneindan-l,3-dione (Matsushima et al. 1992), straight-chain carbamyl compounds (Francis and Tiers 1992), benzophenone derivatives (Terao et al. 1990), a 1,3-dithiole derivative (Nakatsu et al. 1990), o -[(4 -methoxyphenyl)methylene]-4-nitro-benzene-acetonitrile (Oliver et al. 1990) and so-called lambda shaped molecules (Yamamoto et al. 1992). Hall et al. (1988) followed the thermal conversion of the centrosymmetric P2 /c) form of 2,3-dichloroquinazirin to the non-centrosymmetric Pc form by monitoring the development of an SHG signal. Consistent with the earlier observation, the centrosymmetric form was obtained under equilibrium conditions, while the non-centrosymmetric one could be obtained under more kinetic conditions. [Pg.213]

Finally, recent work published by the MacMillan Group [74] demonstrates the feasibility of utilizing selective aldol reactions to prepare carbohydrates in as little as two steps. [Pg.663]

The next step is to tell the computer which blocks are going to use utilities. Select block B3 (the heater before the reactor) and click on the input button, then the Utility tab. Select Gas, as shown in Figure 7.14. Do the same thing for block B5 (the cooler after the reactor), and select Water, and then blocks BI and B9 and select Electricity (at 5 cents/kW h). Now the utilities have been specified to Aspen Plus. [Pg.98]

Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...