default search action
Journal of Computational and Applied Mathematics, Volume 246
Volume 246, July 2013
- Vincent Chabannes, Gonçalo Pena, Christophe Prud'homme:
High-order fluid-structure interaction in 2D and 3D application to blood flow in arteries. 1-9 - Joris Bols, Joris Degroote, Bram Trachet, Benedict Verhegghe, Patrick Segers, Jan A. Vierendeels:
A computational method to assess the in vivo stresses and unloaded configuration of patient-specific blood vessels. 10-17 - S. Ihrle, M. Lauxmann, A. Eiber, Peter Eberhard:
Nonlinear modelling of the middle ear as an elastic multibody system - Applying model order reduction to acousto-structural coupled systems. 18-26 - Nicolae Suciu, Florin A. Radu, Alexander Prechtel, Fabian Brunner, Peter Knabner:
A coupled finite element-global random walk approach to advection-dominated transport in porous media with random hydraulic conductivity. 27-37 - Raphaël Paulus, Benjamin J. Dewals, Sébastien Erpicum, Michel Pirotton, Pierre Archambeau:
Innovative modelling of 3D unsaturated flow in porous media by coupling independent models for vertical and lateral flows. 38-51 - Markus Bause, Kristina Schwegler:
Higher order finite element approximation of systems of convection-diffusion-reaction equations with small diffusion. 52-64 - Jeroen Bogers, K. Kumar, Peter H. L. Notten, Jos F. M. Oudenhoven, Iuliu Sorin Pop:
A multiscale domain decomposition approach for chemical vapor deposition. 65-73 - Florin A. Radu, Adrian Muntean, Iuliu Sorin Pop, Nicolae Suciu, Olaf Kolditz:
A mixed finite element discretization scheme for a concrete carbonation model with concentration-dependent porosity. 74-85 - Yun Fan, Iuliu Sorin Pop:
Equivalent formulations and numerical schemes for a class of pseudo-parabolic equations. 86-93 - Vladimír Vrábel', Marián Slodicka:
Nonlinear diffusion problem with dynamical boundary value. 94-103 - Karel Van Bockstal, Marián Slodicka:
Determination of an unknown diffusion coefficient in a semilinear parabolic problem. 104-112 - Dieter Fauconnier, Erik Dick:
Spectral analysis of nonlinear finite difference discretizations. 113-121 - Marcus Drosson, Koen Hillewaert:
On the stability of the symmetric interior penalty method for the Spalart-Allmaras turbulence model. 122-135 - Yann Moguen, Erik Dick, Jan A. Vierendeels, Pascal Bruel:
Pressure-velocity coupling for unsteady low Mach number flow simulations: An improvement of the AUSM+-up scheme. 136-143 - Pablo Higuera, Manuel del Jesus, Javier L. Lara, Inigo J. Losada, Yanira Guanche, Gabriel Barajas:
Numerical simulation of three-dimensional breaking waves on a gravel slope using a two-phase flow Navier-Stokes model. 144-152 - Xavier Amandolese, Pascal Hémon, Shehryar Manzoor:
The transient temporal response of a flexible bridge deck subjected to a single gust. 153-160 - J. Hillewaere, Joris Degroote, Geert Lombaert, Jan A. Vierendeels, Geert Degrande:
Computational aspects of simulating wind induced ovalling vibrations in silo groups. 161-173 - Carlos García Garino, M. S. Ribero Vairo, S. Andía Fagés, Anibal Mirasso, Jean-Philippe Ponthot:
Numerical simulation of finite strain viscoplastic problems. 174-184 - Ana Graça, Rui P. R. Cardoso, Jeong Whan Yoon:
Subspace analysis to alleviate the volumetric locking in the 3D solid-shell EFG method. 185-194 - D.-T. Nguyen, Gaston Rauchs, J.-P. Ponthot:
The impact of surface higher order differentiability in two-dimensional contact elements. 195-205 - Nawfal Blal, Loïc Daridon, Yann Monerie, Stéphane Pagano:
Micromechanical-based criteria for the calibration of cohesive zone parameters. 206-214 - Séverine Levasseur, Frédéric Collin, Robert Charlier, Djimédo Kondo:
On micromechanical damage modeling in geomechanics: Influence of numerical integration scheme. 215-224 - M. Pellikka, T. Tarhasaari, S. Suuriniemi, Lauri Kettunen:
A programming interface to the Riemannian manifold in a finite element environment. 225-233 - Vitoriano Ruas:
Hermite finite elements for second order boundary value problems with sharp gradient discontinuities. 234-242 - Vincent François-Lavet, François Henrotte, Laurent Stainier, Ludovic Noels, Christophe Geuzaine:
An energy-based variational model of ferromagnetic hysteresis for finite element computations. 243-250 - V. Doyeux, Yannick Guyot, Vincent Chabannes, Christophe Prud'homme, Mourad Ismail:
Simulation of two-fluid flows using a finite element/level set method. Application to bubbles and vesicle dynamics. 251-259 - Ville Räisänen, Stefan Kurz, S. Suuriniemi, T. Tarhasaari, Lauri Kettunen:
How can we deal with moving objects on a fixed mesh? 260-268 - Eric Feulvarch, Jean-Christophe Roux, Jean-Michel Bergheau:
A simple and robust moving mesh technique for the finite element simulation of Friction Stir Welding. 269-277 - Jihong Zhu, Xiao-Jun Gu, Wei-Hong Zhang, Pierre Beckers:
Structural design of aircraft skin stretch-forming die using topology optimization. 278-288 - Biao Zhou, Fabrice Thouverez, D. Lenoir:
An adaptive control strategy based on passive piezoelectric shunt techniques applied to mistuned bladed disks. 289-300 - R. Kebriaei, J. Frischkorn, S. Reese:
A new method of intelligent control for system stabilization in process-integrated powder coating by radial axial rolling of rings. 301-311 - P. Guarneri, J. T. Leverenz, Malgorzata M. Wiecek, G. Fadel:
Optimization of nonhierarchically decomposed problems. 312-319 - Miguel E. Vázquez-Méndez, Lino J. Alvarez-Vázquez, Néstor García-Chan, Aurea Martínez:
Improving the environmental impact of wastewater discharges with a specific simulation-optimization software. 320-328 - Matthieu Sainlez, Georges Heyen:
Comparison of supervised learning techniques for atmospheric pollutant monitoring in a Kraft pulp mill. 329-334
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.