DC Brush Motor Controller, DROK 16A Dual Channel H Bridge Motor Driver Brushed Board DC 5V-36V Motor Drive Control Smart Car PWM Speed Regulator

DROK 12v 24v 36v DC Brush Motor Controller

Parameters:
Output channel: 2-way
Working voltage: 5-36V
2 channel max current: 16A
Each channel rated current: 8A
Each channel output rated power: 96W (12V input); 288W (36V input).
Control signal voltage:3-5V
Each channel control signal current: 2-10MA
Support PWM frequency range: 2-20K
Support PWM duty ratio range: 0-99%
Min. PWM effective pulse width: 10US
Working temperature:-10℃-80℃

Notes:
1. We recommend adding the fuses, as without fuses on the power supply circuit of the motoard. The reversed connection will cause some of the chip permanent damage.
2. In the normal operation, the motor output has no over-current protection. Please do not man-made short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning circuit and tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch onboard parts.
3. Do not connect the drive motor which has obviously inconsistent voltage, current, power, to avoid the unreasonable damage.
4. When sw between positive and negative rotation, it is better to save buffer time on software control, so as to avoid the impact of powerful reverse electromotive force on the MOS tube on the board and reduce the risk of damage.

Package Includes:
1*DC Brush Motor Controller

• DROK DC brush motor controller operating voltage range is DC 5V-36V, rated current is 16A, rated current of each channel is 8A, rated output power of each channel is 96W(12v input), 288W(36v input)..
• Special Point: the motor driver is easy programming and easy control, can control forward and reverse rotation, with strong drive and fast break..
• Material: our motor control module uses complete two half-bridge driver chip + low internal resistance of N-channel MOSFET, MOSFET sw losses is to a minimum, which improve power utilization than integrated power chip program..
• Caution: in the normal operation, the motor output has no over-current protection. Please do not man-made short-circuit, because the module power current is large. Once short-circuit, has the possibility of burning circuit and tube. Please use low current low-voltage testing in the first wiring test; then connect the larger current and voltage. Due to the bare board module sold, please attention wiring thread insulation and prohibited strong voltage touch on board parts..
• Note: it is recommended adding the fuses, as without fuses on the power supply circuit of the motoard. The reversed connection will cause some of the chip permanent damage..