Stamp-Pico

SKU:C050-B

Description

Stamp-Pico is a plug-and-play, cost-effective Wi-Fi minimal core board. It uses the Espressif ESP32 main control chip, equipped with 2 low-power Xtensa® 32-bit LX6 microprocessors, with a main frequency of up to 240MHz. It features compact size, strong performance, and low power consumption, making it suitable for any IoT applications with limited space or battery-powered scenarios.

Tutorial

UIFlow

This tutorial will introduce you to how to control Stamp-Pico through the UIFlow graphical programming platform

Arduino IDE

This tutorial will introduce you to how to program and control Stamp-Pico through Arduino IDE

Features

ESP32-PICO-D4 (2.4GHz Wi-Fi)
Multiple IO interfaces, supporting various application forms (SMT, DIP, flying leads)
Integrated programmable RGB LED and button
ESP32 minimal system board
Equipped with high-temperature plastic armor for better protection of 3D antenna and components
Includes 5V->3.3V DC/DC circuit, GPIOx12, programmable RGB LED x1, button x1
Professionally tuned RF circuit, providing stable and reliable wireless communication quality.
Development Platform
- UiFlow1
- UiFlow2
- Arduino IDE
- ESP-IDF
- Platform.IO

Includes

5 x Stamp-Pico
5 x High-temperature resistant stickers

Applications

Smart home
Wearable devices
Medical devices

Specifications

Main Control Resources	Parameters
ESP32-PICO-D4	240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi Package: LGA48 (7*7mm)
Flash	4MB
Input Voltage	5V @ 500mA
Power Consumption	Normal standby: 5V@29mA, WIFI STA mode: 5V@60mA, Classic Bluetooth mode data transmission: 5V@84mA, DeepSleep mode: 5V@0.35mA
Wireless Range	AP mode: 16m, BLE mode: 110m, Classic Bluetooth mode: 90m
Human-Machine Interface	Programmable physical button x 1, programmable RGB LED (SK6812) x 1
Antenna Type	2.4G 3D antenna
Wi-Fi	802.11 b/g/n (802.11n up to 150 Mbps), frequency range: 2.4 GHz ~ 2.5 GHz
Module Resource Interface	ADC, DAC, touch sensor, SD/SDIO/MMC host controller, SPI, SDIO/SPI slave controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, infrared remote controller, GPIO, pulse counter
IO Interface x12	G0, G1, G3, G26, G36, G18, G19, G21, G22, G25, G32, G33
IO Interface Spacing	2.54mm
Operating Temperature	0 ~ 60°C
Screw Specification	M2 x 4 countersunk hexagon mechanical thread
Product Size	24.0 x 18.0 x 4.6mm
Product Weight	13.7g
Packaging Size	138.0 x 93.0 x 5.6mm
Gross Weight	16.3g

Learn

Downloading Programs

Stamp-Pico adopts the most streamlined circuit design, so it does not include a program download circuit. Users can use a USB-TTL programmer to download programs, as shown in the following wiring diagram.

Shell Supports Reflow Soldering Temperature Curve

Schematics

PinMap

SK6812, Button

ESP32	G27	G39
SK6812	DI	/
Button	/	SW

Model Size

PCB

Datasheets

ESP32-PICO

Softwares

Arduino

USB Driver

Before programming, you need to connect a USB-TTL programmer to Stamp-Pico and connect according to the board's silk screen. Install the corresponding driver for the programmer on your PC.

The most convenient way is to purchase the Stamp-Pico with a programmer kit . The included programmer's pinout is consistent with STAMP-PICO, allowing direct plug-and-play programming without wiring. Currently, M5 provides two versions of programmer drivers, CP210X (for CP2104 version)/CH9102 (for CH9102 version) driver packages. After extracting the package, select the installation package corresponding to your operating system's bit version. (If you are unsure which USB chip your device uses, you can install both drivers.)

Driver Name	Applicable Driver Chip	Download Link
CP210x_VCP_Windows	CP2104	Download
CP210x_VCP_MacOS	CP2104	Download
CP210x_VCP_Linux	CP2104	Download
CH9102_VCP_SER_Windows	CH9102	Download
CH9102_VCP_SER_MacOS v1.7	CH9102	Download

MacOS Port Selection

In MacOS, there may be two optional ports. Please select the port named wchmodem when using.