Abstract
We propose a single-stage network architecture for intra-node connectivity that makes use of nanosecond-scale photonic switches. Although buffering at the switch points is of vital importance for complex multistage networks, this is not the case for smaller-scale single-stage networks where the end nodes are located only one hop apart. By limiting the buffering to the end points, the proposed architecture manages to minimize the required electro-optic and opto-electronic conversions, leading in this way to both low end-to-end latency and better energy efficiency. Combining these advantages with nanosecond-scale switching times can allow for high-throughput operation, even for frequent switch reconfigurations. The performance of the proposed architecture is evaluated via discrete-event simulations for a wide range of synthetic-traffic cases. The simulation results show that high-throughput operation of $\ge {90}\%$ can be achieved even for small message sizes, i.e., 32 KB for all-to-all communication and 2 KB for uniform random traffic, at a data rate of 400 Gb/s and a switch reconfiguration time of $\le {72}\;{\rm ns}$. Moreover, if 100 ns reconfiguration times are achievable as opposed to 150 ns, then for the all-to-all traffic case a 16% and 28% reduction in completion time can be achieved for message sizes of 8 KB and 1 KB, respectively. In a forthcoming era of optically interfaced processors and accelerators, nanosecond-scale photonic switches appear as a highly promising solution for keeping up with the intra-node bandwidth scaling due to their high-bandwidth, low-latency, and fast-switching capabilities.
© 2020 Optical Society of America
Full Article | PDF ArticleMore Like This
Pavlos Maniotis and Daniel M. Kuchta
J. Opt. Commun. Netw. 16(2) A143-A156 (2024)
Georgios Drainakis, Peristera Baziana, and Adonis Bogris
J. Opt. Commun. Netw. 15(11) 804-819 (2023)
S. J. Ben Yoo
J. Opt. Commun. Netw. 15(8) C288-C298 (2023)