Paper:
Views over last 60 days: 424
Development of Measurement for Motion Accuracy of 5 Axis NC Machine Tool
Tomoyuki Saiki*, Masaomi Tsutsumi**, Hiroshi Suzuki***, Masahide Kouya****, and Masaki Ushio*****
*Japan Fine Tech Co., Ltd, 1438-4 Kamiariki, Miyawaka, Fukuoka 823-0015, Japan
**Tokyo University of Agriculture and Technology, 2-24-16 Nakacho, Koganei, Tokyo 184-8588, Japan
***Kyushu Institute of Technology, 680-4 Kawazu, Iizuka, Fukuoka 820-8502, Japan
****Fukuoka Prefectural Government, 7-7 higashi koen, Hakata-ku, Fukuoka 812-8577, Japan
*****Fukuoka Industrial Technology Center, 3-6-1 Norimatsu, Yahata nishi-ku, Kitakyusyu, Fukuoka 807-0831, Japan
Received:August 31, 2007Accepted:October 19, 2007Published:March 5, 2008
Keywords:five-axis NC machine tool, motion accuracy, measurement system, ISO230, NAS
Abstract
In terms of the realization for high accurate and effective machining of complicated shape having under cut shape and free formed surface, five axis controlled machine tools become indispensable because they have any tool position and attitude to avoid the collision between machine tool elements and work piece. In order to estimate the motion accuracy of NC machine tool, various kinds of certificate methods like circular cone cutting test prescribed with NAS and DBB method using the circular motion have been developed and standardized. These methods are mainly used for the motion testing of three-axis NC machine tools and therefore new method and measuring equipment for five-axis NC machine tool is needed. This study aims at developing the motion accuracy measurement system which can measure various kinds of motions like linier motion, circular motion and continuous curved motion under simultaneous five-axis controlling and establishing the compensate method of tool motion. Consideration is added from the viewpoint of motion accuracy using measurement system developed in this report in case simultaneous five-axis control motion command value from CL data.
Cite this article as:T. Saiki, M. Tsutsumi, H. Suzuki, M. Kouya, and M. Ushio, “Development of Measurement for Motion Accuracy of 5 Axis NC Machine Tool,” Int. J. Automation Technol., Vol.2 No.2, pp. 111-118, 2008.Data files:
