The Status and Trends of Crystalline Silicon PV Module Recycling Treatment Methods in Europe and China

Article Preview

Abstract:

The disposal of PV systems will become a problem in view of the continually increasing production of PV modules. Development for waste PV modules recycling would be extremely effective in coping with this problem. In Europe, the thermal method and chemical method for PV recycling were deeply developed. The thermal treatment was to separate the module components under 600°C. The chemical treatment is to recover silicon wafers out of solar cells, which can be used again in modules. But automated separation of components and advanced chemical process needs to be studied on. In China, mechanical treatment research for PV recycling has just started. PV modules were separated and recycled by abrasive machining under the cryogenic condition and electrostatic separation. The mechanical treatment can't recycle silicon to reprocess new wafers for its low purity. Compared to the advanced technology in Europe, PV recycling in China is primary and badly in need of improving to face the huge PV module recycling demands in future.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 724-725)

Pages:

200-204

Citation:

Online since:

August 2013

Export:

Price:

Сopyright:

© 2013 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] K.Wambach, S. Schlenker, A. Müller, B. Konrad and Sunicon AG. A Voluntary Take Back Scheme and Industrial Recycling of Photovoltaic Modules, in: Photovoltaics Recycling Scoping Workshop, June 11, 2009, Philadelphia, 34th PV Specialists Conference

Google Scholar

[2] Fang Lv, Jia Zhang, etc. The international experiences and feasibility study on PV plant recycling in China, 863 Project research report, December, 2012, In Chinese.

Google Scholar

[3] Ewa Klugmann-Radziemska, Piotr Ostrowski. Chemical treatment of crystalline silicon solar cells as a m ethod of recovering puresilicon from photovoltaic modules. Renewable Energy, 35 (2010) 1751–1759.

DOI: 10.1016/j.renene.2009.11.031

Google Scholar

[4] Study on the Development of a Take-Back-and Recovery System for Photovoltaic Products, PV Cycle report, November 2007.

Google Scholar

[5] Rover I., Wambach K., Weinreich W., Roewer G., Bohmhammel K., Process Controlling of the Etching System HF/HNO3/H2O. In: 20th European Photovoltaic Solar Energy Conference 2005, Barcelona, Spain.

Google Scholar

[6] Wang Zhanyou, research on key technology and equipment for used PV modules recycling, presentation on Dec.2012.

Google Scholar