Content deleted Content added
→See also: too many |
→Modern: Add Cleveland. Bates is redlinked but notable. |
||
(27 intermediate revisions by 19 users not shown) | |||
Line 1:
{{short description|Material made by fusing powdered glass to a substrate by firing}}
[[File:0 Reliquaire grandmontain - MR 2648 - Louvre (1).JPG|thumb|[[Gothic art|Gothic]] [[chasse (casket)|châsse]]; 1185–1200; champlevé enamel over copper gilded; height: {{cvt|17.7
'''Vitreous enamel''', also called '''porcelain enamel''', is a material made by [[melting|fusing]] powdered [[glass]] to a substrate by firing, usually between {{
Enamel can be used on [[metal]], [[enamelled glass|glass]], [[overglaze decoration|ceramics]], stone, or any material that will withstand the fusing temperature. In technical terms fired enamelware is an integrated layered composite of glass and another material (or more glass). The term "enamel" is most often restricted to work on metal, which is the subject of this article. Essentially the same technique used with other bases is known by different terms: on glass as ''[[enamelled glass]]'', or "painted glass", and on pottery it is called ''[[overglaze decoration]]'', "overglaze enamels" or "enamelling". The craft is called "'''enamelling'''", the artists "enamellers" and the objects produced can be called "enamels".
[[File:明早期 掐絲琺瑯菱花口碟-Dish with scalloped rim MET DT7072 (cropped).jpg|thumb|[[Chinese art|Chinese]] dish with scalloped rim, from the [[Ming
Enamelling is an old and widely adopted technology, for most of its history mainly used in [[jewellery]] and [[decorative art]]. Since the 18th century, enamels have also been applied to many metal consumer objects, such as some [[Cast-iron cookware#Enameled cast iron|cooking vessels]], steel sinks, and [[cast-iron]] bathtubs. It has also been used on some [[Major appliance|appliances]], such as
The term "enamel" has also sometimes been applied to industrial materials other than vitreous enamel, such as [[enamel paint]] and the polymers coating [[enameled wire]]; these actually are very different in [[materials science]] terms.
Line 21:
The earliest undisputed objects known to use enamel are a group of [[Mycenae]]an rings from [[Cyprus]], dated to the 13th century BC.<ref name="Osborne, 331"/> Although Egyptian pieces, including jewellery from the [[Tomb of Tutankhamun]] of c. 1325 BC, are frequently described as using "enamel", many scholars doubt the glass paste was sufficiently melted to be properly so described, and use terms such as "glass-paste". It seems possible that in Egyptian conditions the melting point of the glass and gold were too close to make enamel a viable technique. Nonetheless, there appear to be a few actual examples of enamel, perhaps from the [[Third Intermediate Period of Egypt]] (beginning 1070 BC) on.<ref>Ogden, 166</ref> But it remained rare in both Egypt and Greece.
The technique appears in the [[Koban culture|Koban]] culture of the northern and central [[Caucasus]], and was perhaps carried by the [[Sarmatians]] to the ancient Celts.<ref name="Osborne, 331"/> Red enamel is used in 26 places on the [[Battersea Shield]] (c.350–50 BC), probably as an imitation of the red Mediterranean [[coral]], which is used on the [[Witham Shield]] (
A problem that adds to the uncertainty over early enamel is artefacts (typically excavated) that appear to have been prepared for enamel, but have now lost whatever filled the cloisons or backing to a [[champlevé]] piece.<ref name="Osborne, 331"/> This occurs in several different regions, from ancient Egypt to Anglo-Saxon England. Once enamel becomes more common, as in medieval Europe after about 1000, the assumption that enamel was originally used becomes safer.
Line 27:
===Medieval and Renaissance Europe===
[[File:Waddesdon bequest British Museum DSCF9814 05.JPG|thumb|Detail of [[Limoges enamel#Renaissance painted enamel|painted Limoges enamel]] dish, mid-16th century, attributed to [[Jean de Court]]]]
In European art history, enamel was at its most important in the [[Middle Ages]], beginning with the Late Romans and then the [[Byzantine Empire|Byzantine]], who began to use [[cloisonné]] enamel in imitation of cloisonné inlays of precious stones. The [[Byzantine enamel]] style was widely adopted by the peoples of [[Migration Period]] northern Europe. The Byzantines then began to use cloisonné more freely to create images; this was also copied in Western Europe. In [[Kievan Rus]] a [[finift enamel]] technique was developed.<ref>{{Citation |title=ХУДОЖНЯ ЕМАЛЬ У ХРОНОТОПІ УКРАЇНСЬКОГО МИСТЕЦТВА. Альманах |last=Наумов |first=Олег |date=2019-01-01 |work=Культура і Сучасність |volume=2019 |issue=2 |pages=192–197}}</ref><ref name =Mostovshchikova2020>{{Citation |title=Traditions of painted hot enamel of Europe and the East of the XVIIIth century in contemporary enamel art of Ukraine |last=Мостовщикова |first=Дар'я Олегівна |url=https://elibrary.kubg.edu.ua/id/eprint/32111/ |journal=Актуальнi питання гуманiтарних наук: Мiжвузiвський збiрник наукових праць молодих вчених Дрогобицького державного педагогiчного унiверситету iменi Iвана Франка |volume=1 |year=2020|issue=30 |pages=173–180|doi=10.24919/2308-4863.1/30.212240 }}</ref>
[[File:Finift_01.jpg|thumb|Examples of art made of finift enamel from [[Kievan Rus]]]]
[[Mosan art#Metalwork|Mosan metalwork]] often included enamel plaques of the highest quality in [[reliquaries]] and other large works of [[goldsmithing]]. [[Limoges enamel]] was made in [[Limoges]], France, the most famous centre of vitreous enamel production in Western Europe, though Spain also made a good deal. Limoges became famous for champlevé enamels from the 12th century onwards, producing on a large scale, and then (after a period of reduced production) from the 15th century retained its lead by switching to painted enamel on flat metal plaques. The [[champlevé]] technique was considerably easier and very widely practiced in the [[Romanesque art|Romanesque]] period. In [[Gothic art]] the finest work is in [[basse-taille]] and [[ronde-bosse]] techniques, but cheaper champlevé works continued to be produced in large numbers for a wider market.
Painted enamel remained in fashion for over a century, and in France developed into a sophisticated Renaissance and the [[Mannerist]] style, seen on objects such as large display dishes, ewers,
A Russian school developed, which used the technique on other objects, as in the Renaissance, and for relatively cheap religious pieces such as crosses and small icons.
Line 37 ⟶ 39:
===China===
[[File:Chinese - Wine Pot - Walters 44569 - Side (cropped).jpg|thumb|Chinese [[cloisonné]] enamel bronze wine pot, 18th century]]
From either Byzantium or the Islamic world, the cloisonné technique reached China in the 13–14th centuries. The first written reference to cloisonné is in a book from 1388, where it is called "Dashi ('Muslim') ware".<ref name=Sullivan>Sullivan, Michael, ''The arts of China'', 4th edn, p. 239, University of California Press, 1999, {{ISBN|0-520-21877-9}}, {{ISBN|978-0-520-21877-2}}, [https://books.google.com/books?id=sn0CyBCJKz8C&pg=PA239 Google books]</ref> No Chinese pieces that are clearly from the 14th century are known; the earliest datable pieces are from the reign of the [[Xuande Emperor]] (
Cloisonné remained very popular in China until the 19th century and is still produced today. The most elaborate and most highly valued Chinese pieces are from the early [[Ming
=== Japan ===
[[File:Khalili Collection Japanese Meiji Art E83.jpg|thumb|right|Imperial vases by [[Ando Jubei]], with the [[Imperial Seal of Japan|chrysanthemum crests of the Imperial family]], using {{lang|ja-latn|moriage}} to slightly raise the design; [[Khalili Collection of Japanese Art]]]]
Japanese artists did not make three-dimensional enamelled objects until the 1830s but, once the technique took hold based on analysis of Chinese objects, it developed very rapidly, reaching a peak in the [[Meiji (era)|Meiji]] and [[Taishō]] eras (late 19th/
Early Japanese enamels were cloudy and opaque, with relatively clumsy shapes. This changed rapidly from 1870 onwards.<ref name="enamelinjapan" /> The Nagoya cloisonné company ({{lang|ja-latn|Nagoya shippo kaisha}} existed from 1871 to 1884, to sell the output of many small workshops and help them improve their work.<ref name="enamelinjapan" /> In 1874, the government created the {{lang|ja-latn|Kiriu kosho kaisha}} company to sponsor the creation of a wide range of decorative arts at international exhibitions. This was part of a programme to promote Japan as a modern, industrial nation.<ref name="enamelinjapan" />
Line 53 ⟶ 55:
Enamel was established in the [[Mughal Empire]] by around 1600 for decorating gold and silver objects, and became a distinctive feature of Mughal jewellery. The Mughal court was known to employ ''mīnākār'' (enamelers).<ref name="enamelislamic">{{cite book |last1=Moura Carvalho |first1=Pedro |editor1-last=Williams |editor1-first=Haydn |title=Enamels of the world, 1700-2000: the Khalili collections |date=2009 |publisher=Khalili Family Trust |location=London |isbn=978-1-874780-17-5 |pages=187–196 |chapter=Enamel in the Islamic Lands}}</ref> These craftsmen reached a peak of during the reign of [[Shah Jahan]] in the mid-17th century. Transparent enamels were popular during this time.<ref name="enamelislamic" /> Both cloissoné and champlevé were produced in Mughal, with champlevé used for the finest pieces.<ref name="enamelislamic" /> Modern industrial production began in [[Calcutta]] in 1921, with the [[Bengal Enamel Works]] Limited.
Enamel was used in [[Iran]] for colouring and ornamenting the surface of metals by fusing over it brilliant colours that are decorated in an intricate design called [[Meenakari]]. The French traveller [[Jean Chardin]], who toured Iran during the [[Safavid]] period, made a reference to an enamel work of [[Isfahan]], which comprised a pattern of birds and animals on a floral background in light blue, green, yellow and red. Gold has been used traditionally for Meenakari jewellery as it holds the enamel better, lasts longer and its lustre brings out the colours of the enamels. [[Silver]], a later introduction, is used for artifacts like boxes, bowls, spoons, and art pieces. [[Copper]] began to be used for handicraft products after the Gold Control Act, was enforced in India which compelled the Meenakars to look for an alternative material. Initially, the work of Meenakari often went unnoticed as this art was traditionally used on the back of pieces of ''kundan'' or gem-studded jewellery, allowing pieces to be reversible.<ref>{{cite web|url=http://www.iranreview.org/content/Documents/The_Art_of_Minakari_2.htm|title=The Art of Minakari|website=iranreview.org}}</ref>
===Modern===
[[File:2008-08-17 grijs gewolkt.JPG|thumb|''Grey clouds'', typical enamel cooking gear from the Dutch [[DRU Cultuurfabriek|DRU factory]], popular in the 1950s]]
More recently, the bright, jewel-like colours have made enamel
Enamel was first applied commercially to sheet iron and steel in Austria and Germany in about 1850.<ref name=Andrews>Andrews, Andrew Irving, ''Porcelain enamels: the preparation, application, and properties of enamels'', Garrard Press, 1961</ref>{{rp|5}} Industrialization increased as the purity of raw materials increased and costs decreased. The wet application process started with the discovery of the use of clay to suspend [[frit]] in water. Developments that followed during the 20th century include enamelling-grade steel, cleaned-only surface preparation, automation, and ongoing improvements in efficiency, performance, and quality.<ref name=Andrews />{{rp|5}} ▼
Between the World Wars, [[Cleveland, Ohio|Cleveland]] in the United States became a center for enamel art, led by [[Kenneth F. Bates]]; [[H. Edward Winter]] who had taught at the [[Cleveland School of Art]] wrote three books on the topic including ''Enamel Art on Metals''.<ref>{{cite web |author1=Bernard N. Jazzar |author2=Harold B. Nelson |title=Painting With Fire (From our Archives) |url=https://www.themagazineantiques.com/article/painting-with-fire/ |website=[[ Antiques (magazine)|The Magazine Antiques]] |access-date=4 November 2024 |date=October 2016}}</ref> In [[Australia]], abstract artist [[Bernard Hesling]] brought the style into prominence with his variously sized steel plates, starting in 1957.<ref>{{cite web|author=database and e-research tool for art and design researchers |url=http://www.daao.org.au/bio/bernard-hesling/biography/ |title=Bernard Hesling :: biography at :: at Design and Art Australia Online |publisher=Daao.org.au |access-date=2013-12-25}}</ref> A resurgence in enamel-based art took place near the end of the 20th century in the [[Soviet Union]], led by artists like [[Alexei Maximov (enamelist)|Alexei Maximov]] and [[Leonid Efros]].
▲Enamel was first applied commercially to sheet iron and steel in Austria and Germany in about 1850.<ref name=Andrews>Andrews, Andrew Irving, ''Porcelain enamels: the preparation, application, and properties of enamels'', Garrard Press, 1961</ref>{{rp|5}} Industrialization increased as the purity of raw materials increased and costs decreased. The wet application process started with the discovery of the use of clay to suspend [[frit]] in water. Developments that followed during the 20th century include enamelling-grade steel, cleaned-only surface preparation, automation, and ongoing improvements in efficiency, performance, and quality.<ref name=Andrews />{{rp|5}}
<ref>{{cite web |title=WINTER, HAROLD EDWARD {{!}} Encyclopedia of Cleveland History {{!}} Case Western Reserve University |url=https://case.edu/ech/articles/w/winter-harold-edward |website=case.edu |access-date=4 November 2024 |language=en |date=12 May 2018}}</ref>
== Properties ==
[[File:Ground vitreous enamel powder in different colors.jpg|thumb|300px|Glass vials with ground vitreous enamel powder in different colors]]
[[File:Mortar-agate hg.jpg|thumb|300px|An [[agate]] mortar and pestle is used to finely grind vitreous enamel powder, mixed with a volatile oil, such as [[lavender oil]], to produce enamel paints for artistic work.]]
Vitreous enamel can be applied to most metals. Most modern industrial enamel is applied to steel in which the carbon content is controlled to prevent unwanted reactions at the firing temperatures. Enamel can also be applied to gold, silver, copper, [[aluminium]],<ref>Judd, Donald, “Porcelain Enameling Aluminum: An Overview,” Proceedings of the 59th Porcelain Enamel Institute Technical Forum, 45-51 (1997).</ref> stainless steel,<ref>Sullivan, J.D. and Nelson, F.W., "Stainless Steel Requires Special Enameling Procedures", Proceedings of the Porcelain Enamel Institute Technical Forum,"
Vitreous enamel has many useful properties: it is smooth, hard, chemically resistant, durable, scratch resistant (5–6 on the [[
The Buick automobile company was founded by [[David Dunbar Buick]] with wealth earned by his development of improved enamelling processes, c. 1887, for sheet steel and cast iron. Such enameled ferrous material had, and still has, many applications: early 20th century and some modern [[advertising]] signs, interior [[oven]] walls, [[cooking pot]]s, housing and interior walls of major [[kitchen appliance]]s, housing and drums of clothes washers and dryers, sinks and [[cast iron]] [[bathtub]]s, [[farm]] [[storage silo]]s, and processing equipment such as [[chemical reactor]]s and pharmaceutical process tanks. Structures such as [[filling station]]s, [[bus station]]s and [[Lustron House]]s had walls, ceilings and structural elements made of enamelled steel.{{Citation needed|date=March 2024}}
One of the most widespread modern uses of enamel is in the production of quality chalk-boards and marker-boards (typically called 'blackboards' or 'whiteboards') where the resistance of enamel to wear and chemicals ensures that 'ghosting', or unerasable marks, do not occur, as happens with polymer boards. Since standard enamelling steel is magnetically attractive, it may also be used for magnet boards. Some new developments in the last ten years include enamel/non-stick hybrid coatings, sol-gel functional top-coats for enamels, enamels with a metallic appearance, and easy-to-clean enamels.<ref>Gavlenski, Jim and Baldwin, Charles, "Advanced Porcelain Enamel Coatings with Novel Properties," Proceedings of the 69th Porcelain Enamel Institute Technical Forum, 53-58, (2007).</ref>
Line 88 ⟶ 92:
[[File:British Museum -Dunstable Swan Jewel -side cropped close.jpg|thumb|The [[Dunstable Swan Jewel]], a [[livery]] badge in [[ronde bosse]] enamel, about 1400. British Museum]]
Variants, and less common techniques are:
* [[Ronde bosse]], French for "in the round", also known as "encrusted enamel". A 3D type of enamelling where a sculptural form or wire framework is completely or partly enamelled, as in the 15th century [[Holy Thorn Reliquary]].<ref>Campbell, 7, 42</ref>
* [[En résille]] ({{Lang|fr|Émail en résille sur verre}}, French for 'enamel in a network on glass
* [[Stencil]]ing, where a stencil is placed over the work and the powdered enamel is sifted over the top. The stencil is removed before firing, the enamel staying in a pattern, slightly raised.
* [[Sgraffito]], where an unfired layer of enamel is applied over a previously fired layer of enamel of a contrasting colour, and then partly removed with a tool to create the design.
* [[Serigraph]], where a silkscreen is used with 60–70in grade mesh.
* Surrey enamel, a 17th-century type for brass objects such as candlesticks; effectively champlevé.<ref>Lucie-Smith, 84</ref>
* '''Counter-enamelling''', not strictly a technique, but a necessary step in many techniques, especially painted enamel on thin plaques; introduced in 15th-century Europe. Enamel is applied to the back of a piece as well – sandwiching the metal – to equalize the rates of expansion under heat, and so create less tension on the glass so it does not crack.<ref
* [[Safed chalwan]], where jewels are set in white enamel
== Industrial enamel application ==
Line 115 ⟶ 119:
On sheet steel, a ground coat layer is applied to create adhesion. The only surface preparation required for modern ground coats is degreasing of the steel with a mildly alkaline solution. White and coloured second "cover" coats of enamel are applied over the fired ground coat. For electrostatic enamels, the coloured enamel powder can be applied directly over a thin unfired ground coat "base coat" layer that is co-fired with the cover coat in a very efficient two-coat/one-fire process.
The frit in the ground coat contains smelted-in cobalt and/or nickel oxide as well as other transition metal oxides to catalyse the enamel-steel bonding reactions. During firing of the enamel at between {{convert|760|
== Building cladding ==
Line 140 ⟶ 144:
== See also ==
* [[Fred Uhl Ball]] (1945–1985) – American enamellist who created the largest known enamel mural
* [[Oskar Schindler]]
* [[Rostov, Yaroslavl Oblast|Rostov]] in Russia, with Moscow a centre of the Russian industry
== Notes ==
Line 149 ⟶ 153:
== References ==
* Campbell, Marian. ''An Introduction to Medieval Enamels'', 1983, [[Office of Public Sector Information|HMSO]] for [[V&A Museum]], {{ISBN|0-11-290385-1}}
*[[Edward Lucie-Smith|
*Ogden, Jack, "Metal", in ''Ancient Egyptian Materials and Technology'', eds. Paul T. Nicholson, Ian Shaw, 2000, Cambridge University Press, {{ISBN|0521452570}}, 9780521452571, [https://books.google.
*Osborne, Harold (ed), ''The Oxford Companion to the Decorative Arts'', 1975, OUP, {{ISBN|0198661134}}
Line 163 ⟶ 167:
* [http://www.langantiques.com/university/index.php/Enamels_on_jewelry#Email_brun Enamels on jewelry] – historical
* [http://www.ganoksin.com/borisat/directory/library/subject/7 Enameling Articles and Tutorials at The Ganoksin Project]
* [http://www.cidae.com/ CIDAE Center of Information and Difusion of the Art of Enamelling (ES)]
* [http://www.enamellers.nl/index.php?l=uk Society of Dutch Enamellers (NL)]
* [http://www.enamelistsociety.org/ The Enamelist Society (US)]
|