Turing degree

(Redirected from Turing degrees)

In computer science and mathematical logic the Turing degree (named after Alan Turing) or degree of unsolvability of a set of natural numbers measures the level of algorithmic unsolvability of the set.

Overview

edit

The concept of Turing degree is fundamental in computability theory, where sets of natural numbers are often regarded as decision problems. The Turing degree of a set is a measure of how difficult it is to solve the decision problem associated with the set, that is, to determine whether an arbitrary number is in the given set.

Two sets are Turing equivalent if they have the same level of unsolvability; each Turing degree is a collection of Turing equivalent sets, so that two sets are in different Turing degrees exactly when they are not Turing equivalent. Furthermore, the Turing degrees are partially ordered, so that if the Turing degree of a set X is less than the Turing degree of a set Y, then any (possibly noncomputable) procedure that correctly decides whether numbers are in Y can be effectively converted to a procedure that correctly decides whether numbers are in X. It is in this sense that the Turing degree of a set corresponds to its level of algorithmic unsolvability.

The Turing degrees were introduced by Post (1944) and many fundamental results were established by Kleene & Post (1954). The Turing degrees have been an area of intense research since then. Many proofs in the area make use of a proof technique known as the priority method.

Turing equivalence

edit

For the rest of this article, the word set will refer to a set of natural numbers. A set X is said to be Turing reducible to a set Y if there is an oracle Turing machine that decides membership in X when given an oracle for membership in Y. The notation XT Y indicates that X is Turing reducible to Y.

Two sets X and Y are defined to be Turing equivalent if X is Turing reducible to Y and Y is Turing reducible to X. The notation XT Y indicates that X and Y are Turing equivalent. The relation ≡T can be seen to be an equivalence relation, which means that for all sets X, Y, and Z:

  • XT X
  • XT Y implies YT X
  • If XT Y and YT Z then XT Z.

A Turing degree is an equivalence class of the relation ≡T. The notation [X] denotes the equivalence class containing a set X. The entire collection of Turing degrees is denoted  .

The Turing degrees have a partial order ≤ defined so that [X] ≤ [Y] if and only if XT Y. There is a unique Turing degree containing all the computable sets, and this degree is less than every other degree. It is denoted 0 (zero) because it is the least element of the poset  . (It is common to use boldface notation for Turing degrees, in order to distinguish them from sets. When no confusion can occur, such as with [X], the boldface is not necessary.)

For any sets X and Y, X join Y, written XY, is defined to be the union of the sets {2n : nX} and {2m+1 : mY}. The Turing degree of XY is the least upper bound of the degrees of X and Y. Thus   is a join-semilattice. The least upper bound of degrees a and b is denoted ab. It is known that   is not a lattice, as there are pairs of degrees with no greatest lower bound.

For any set X the notation X′ denotes the set of indices of oracle machines that halt (when given their index as input) when using X as an oracle. The set X′ is called the Turing jump of X. The Turing jump of a degree [X] is defined to be the degree [X′]; this is a valid definition because X′ ≡T Y′ whenever XT Y. A key example is 0′, the degree of the halting problem.

Basic properties of the Turing degrees

edit
  • Every Turing degree is countably infinite, that is, it contains exactly   sets.
  • There are   distinct Turing degrees.
  • For each degree a the strict inequality a < a′ holds.
  • For each degree a, the set of degrees below a is countable. The set of degrees greater than a has size  .

Structure of the Turing degrees

edit

A great deal of research has been conducted into the structure of the Turing degrees. The following survey lists only some of the many known results. One general conclusion that can be drawn from the research is that the structure of the Turing degrees is extremely complicated.

Order properties

edit
  • There are minimal degrees. A degree a is minimal if a is nonzero and there is no degree between 0 and a. Thus the order relation on the degrees is not a dense order.
  • The Turing degrees are not linearly ordered by ≤T.[1]
  • In fact, for every nonzero degree a there is a degree b incomparable with a.
  • There is a set of   pairwise incomparable Turing degrees.
  • There are pairs of degrees with no greatest lower bound. Thus   is not a lattice.
  • Every countable partially ordered set can be embedded in the Turing degrees.
  • An infinite strictly increasing sequence a1, a2, ... of Turing degrees cannot have a least upper bound, but it always has an exact pair c, d such that ∀e (e<ce<d ⇔ ∃i eai), and thus it has (non-unique) minimal upper bounds.
  • Assuming the axiom of constructibility, it can be shown there is a maximal chain of degrees of order type  .[2]

Properties involving the jump

edit
  • For every degree a there is a degree strictly between a and a′. In fact, there is a countable family of pairwise incomparable degrees between a and a′.
  • Jump inversion: a degree a is of the form b′ if and only if 0′a.
  • For any degree a there is a degree b such that a < b and b′ = a′; such a degree b is called low relative to a.
  • There is an infinite sequence ai of degrees such that ai+1ai for each i.
  • Post's theorem establishes a close correspondence between the arithmetical hierarchy and finitely iterated Turing jumps of the empty set.

Logical properties

edit

Recursively enumerable Turing degrees

edit
 
A finite lattice that can't be embedded in the r.e. degrees.

A degree is called recursively enumerable (r.e.) or computably enumerable (c.e.) if it contains a recursively enumerable set. Every r.e. degree is below 0′, but not every degree below 0′ is r.e.. However, a set   is many-one reducible to 0′ iff   is r.e..[3]

Additionally, there is Shoenfield's limit lemma, a set A satisfies   iff there is a "recursive approximation" to its characteristic function: a function g such that for sufficiently large s,  .[4]

A set A is called n-r e. if there is a family of functions   such that:[4]

  • As is a recursive approximation of A: for some t, for any st we have As(x) = A(x), in particular conflating A with its characteristic function. (Removing this condition yields a definition of A being "weakly n-r.e.")
  • As is an "n-trial predicate": for all x, A0(x)=0 and the cardinality of   is ≤n.

Properties of n-r.e. degrees:[4]

  • The class of sets of n-r.e. degree is a strict subclass of the class of sets of (n+1)-r.e. degree.
  • For all n>1 there are two (n+1)-r.e. degrees a, b with  , such that the segment   contains no n-r.e. degrees.
  •   and   are (n+1)-r.e. iff both sets are weakly-n-r.e.

Post's problem and the priority method

edit

Emil Post studied the r.e. Turing degrees and asked whether there is any r.e. degree strictly between 0 and 0′. The problem of constructing such a degree (or showing that none exist) became known as Post's problem. This problem was solved independently by Friedberg and Muchnik in the 1950s, who showed that these intermediate r.e. degrees do exist (Friedberg–Muchnik theorem). Their proofs each developed the same new method for constructing r.e. degrees, which came to be known as the priority method. The priority method is now the main technique for establishing results about r.e. sets.

The idea of the priority method for constructing a r.e. set X is to list a countable sequence of requirements that X must satisfy. For example, to construct a r.e. set X between 0 and 0′ it is enough to satisfy the requirements Ae and Be for each natural number e, where Ae requires that the oracle machine with index e does not compute 0′ from X and Be requires that the Turing machine with index e (and no oracle) does not compute X. These requirements are put into a priority ordering, which is an explicit bijection of the requirements and the natural numbers. The proof proceeds inductively with one stage for each natural number; these stages can be thought of as steps of time during which the set X is enumerated. At each stage, numbers may be put into X or forever (if not injured) prevented from entering X in an attempt to satisfy requirements (that is, force them to hold once all of X has been enumerated). Sometimes, a number can be enumerated into X to satisfy one requirement but doing this would cause a previously satisfied requirement to become unsatisfied (that is, to be injured). The priority order on requirements is used to determine which requirement to satisfy in this case. The informal idea is that if a requirement is injured then it will eventually stop being injured after all higher priority requirements have stopped being injured, although not every priority argument has this property. An argument must be made that the overall set X is r.e. and satisfies all the requirements. Priority arguments can be used to prove many facts about r.e. sets; the requirements used and the manner in which they are satisfied must be carefully chosen to produce the required result.

For example, a simple (and hence noncomputable r.e.) low X (low means X′=0′) can be constructed in infinitely many stages as follows. At the start of stage n, let Tn be the output (binary) tape, identified with the set of cell indices where we placed 1 so far (so X=∪n Tn; T0=∅); and let Pn(m) be the priority for not outputting 1 at location m; P0(m)=∞. At stage n, if possible (otherwise do nothing in the stage), pick the least i<n such that ∀m Pn(m)≠i and Turing machine i halts in <n steps on some input STn with ∀mS\Tn Pn(m)≥i. Choose any such (finite) S, set Tn+1=S, and for every cell m visited by machine i on S, set Pn+1(m) = min(i, Pn(m)), and set all priorities >i to ∞, and then set one priority ∞ cell (any will do) not in S to priority i. Essentially, we make machine i halt if we can do so without upsetting priorities <i, and then set priorities to prevent machines >i from disrupting the halt; all priorities are eventually constant.

To see that X is low, machine i halts on X iff it halts in <n steps on some Tn such that machines <i that halt on X do so <n-i steps (by recursion, this is uniformly computable from 0′). X is noncomputable since otherwise a Turing machine could halt on Y iff Y\X is nonempty, contradicting the construction since X excludes some priority i cells for arbitrarily large i; and X is simple because for each i the number of priority i cells is finite.

See also

edit

References

edit

Monographs (undergraduate level)

edit
  • Cooper, S.B. (2004). Computability theory. Boca Raton, FL: Chapman & Hall/CRC. p. 424. ISBN 1-58488-237-9.
  • Cutland, Nigel J. (1980). Computability, an introduction to recursive function theory. Cambridge-New York: Cambridge University Press. p. 251. ISBN 0-521-22384-9.; ISBN 0-521-29465-7

Monographs and survey articles (graduate level)

edit

Research papers

edit

Notes

edit