Jump to content

Callender-Hamilton bridge

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by 121.99.69.111 (talk) at 07:42, 4 July 2024 (Additional examples added). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
The Alexis River Bridge, Labrador is a Callender-Hamilton type bridge

The Callender-Hamilton bridge is a modular portable pre-fabricated truss bridge. It is primarily designed for use as permanent civil bridging as well as for emergency bridge replacement and for construction by military engineering units. Assembling a Callender-Hamilton bridge takes much longer than the more familiar Bailey bridge as it is made up of individual lengths of galvanised steel bolted together with galvanised high-strength steel bolts, all of which require torque settings. It is stronger and simpler in design concept than the Bailey bridge.

History

[edit]

The Callender-Hamilton bridge system was designed by New Zealand civil engineer A. M. Hamilton, and patented by him in 1935. The system is currently fabricated by Painter Brothers, Hereford, operating within the Balfour Beatty Power Networks Division[1] formerly British Insulated Callender's Cables.

Hamilton's bridge concept was inspired by his work between 1928 and 1932 as principal engineer on the 'Hamilton Road' through Iraqi Kurdistan. He described the building of this road in his book Road Through Kurdistan: Travels in Northern Iraq, 1937. Hamilton became aware of the need for strong, adaptable bridges made from simple components that could easily be transported and erected in remote locations or on difficult terrain. Hamilton was awarded £4,000 in 1936 by the War Office for the use of his early bridges and the Royal Commission on Awards to Inventors awarded him £10,000 in 1954 for the partial breach of his patent by the design of the Bailey bridge.[2]

Design

[edit]

The Callender-Hamilton bridge system is a prefabricated Panel/Floor Beam/Deck system designed to span bridging lengths ranging from 30 to 150 metres with road widths of one to three or more lanes. The design uses Warren trusses and is centred on a series of gusset plates that allow the direct attachment of the longitudinal, diagonal, vertical, and cross framing members. Centralised connection points increase the speed of construction and allow identical panels to be fabricated from identical members and then installed on site. An important feature is that all connections are bolted, so removing the need for onsite welding.

The bridge is usually built on falsework. A reinforced concrete deck is then superimposed on, and acts compositely with, the fabricated steel truss deck, thereby eliminating the use of scaffolding. A steel orthotropic deck, steel open grate deck or a timber deck are alternatives to a concrete deck. As with the Bailey bridge, an enhanced feature of the Callender-Hamilton bridge is that it can be assembled entirely on one side of a gap and with a removable launching nose added then be projected on rollers to the other side.[3]

All bridge elements are small enough to be transported by road and site operations can be carried out without skilled labour, special plant or heavy equipment. Because of the modular design, repairs are as structurally efficient as the original construction and at the end of service dismantled bridges can be reduced to initial components for reuse. Salvability is high due to the hot-dip galvanisation of each individual component.

Examples of Callender-Hamilton bridges in use

[edit]
Callender-Hamilton bridge, 4th Walton bridge

See also

[edit]

References

[edit]
  1. ^ "Company Profile". Painter Brothers. Retrieved 2013-06-13.
  2. ^ "Bridge Claim By General "Used As Basis For Bailey Design"". The Times. 26 July 1955. p. 4 col E.
  3. ^ a b "Bridges on the Trans Labrador Highway" (PDF).
  4. ^ "Archived copy" (PDF). Archived from the original (PDF) on 2011-09-02. Retrieved 2011-02-11.{{cite web}}: CS1 maint: archived copy as title (link)
  5. ^ "Rechercher". Dday-overlord.forumactif.com. Retrieved 2013-06-13.
  6. ^ "TNC On Tour Summer 2007 Page 29". Tuesdaynightclub.co.uk. 2007-07-19. Retrieved 2013-06-13.
  7. ^ a b c "ACROW Limited of Canada: Callender-Hamilton Bridges- Vehicular, Beam, Heavy-Haul, Callender-Hamilton, Railroad and Moveable Bridges". www.acrowcanada.com. Archived from the original on June 27, 2009.
  8. ^ "The Story of a Callender-Hamilton Bridge Demolished after 63 years".
  9. ^ "Ehzerbrug (Almen, 1946)". Structurae. Retrieved 2021-07-27.
  10. ^ "Cumbria – Places – Langwathby Bridge". BBC. 2008-04-28. Retrieved 2013-06-13.
  11. ^ "Tal-y-Cafn Bridge in North Wales". Painter Brothers. Archived from the original on 2012-03-24. Retrieved 2013-06-13.
  12. ^ "Rotten timber delays work on Two Fords Bridge". Dorset For You. 2009-07-07. Archived from the original on 2009-07-12.
  13. ^ "Medieval bridge – old mill – Vernon". www.vernon-visite.org. Archived from the original on January 5, 2010.
  14. ^ "Walton Bridge – The fourth bridge". Archived from the original on 2009-12-05. Retrieved 2009-12-14.
  15. ^ "Pont du Mandrare (1958-2012) – Madagascar – Androy" – via www.youtube.com.
[edit]