Compressed air engine
 |
A compressed-air engine is a pneumatic actuator that creates useful work by expanding compressed air. They have existed in many forms over the past two centuries, ranging in size from hand held turbines up to several hundred horsepower. Some types rely on pistons and cylinders, others use turbines. Many compressed air engines improve their performance by heating the incoming air, or the engine itself. Some took this a stage further and burned fuel in the cylinder or turbine, forming a type of internal combustion engine.
Tools
Impact wrenches, drills, firearms, die grinders, dental drills and other pneumatic tools use a variety of air engines or motors. These include vane type pumps, turbines and pistons.
Torpedoes
Most successful early forms of self propelled torpedoes used high pressure compressed air, although this was superseded by internal or external combustion engines, steam engines, or electric motors.
Railways
Compressed air engines were used in trams and shunters, and eventually found a successful niche in mining locomotives, although eventually they were replaced by electric trains, underground.[2] Over the years designs increased in complexity, resulting in a triple expansion engine with air-to-air reheaters between each stage.[3]
Aircraft
Transport category airplanes, such as commercial airliners, use compressed air starters to start the main engines. The air is supplied by the load compressor of the aircraft's auxiliary power unit, or by ground equipment.
Automotive
There is currently some interest in developing air cars. Several engines have been proposed for these, although none have demonstrated the performance and long life needed for personal transport.
Energine
The Energine Corporation is a South Korean company that delivers fully-assembled cars running on a hybrid compressed air and electric engine. The compressed-air engine is used to activate an alternator, which extends the autonomous operating capacity of the car.
EngineAir
EngineAir, an Australian company, is making a rotary engine powered by compressed air, called The Di Pietro motor. The Di Pietro motor concept is based on a rotary piston. Different from existing rotary engines, the Di Pietro motor uses a simple cylindrical rotary piston (shaft driver) which rolls, with little friction, inside the cylindrical stator.[4]
It can be used in boat, cars, carriers and other vehicles. Only 1 psi (≈ 6,8 kPa) of pressure is needed to overcome the friction.[5][6] The engine was also featured on the ABC's New Inventors program in Australia on the 24th March, 2004.[7]
K'Airmobiles
K'Airmobiles vehicles were intended to be commercialized from a project developed in France in 2006-2007 by a small group of researchers. However, the project has not been able to gather the necessary funds.
People should note that, meantime, the team has recognized the physical impossibility to use on-board stored compressed air due to its poor energy capacity and the thermal losses resulting from the expansion of the gas.
These days, using the patent pending 'K'Air Generator', converted to work as a compressed-gas motor, the project should be launched in 2010, thanks to a north American group of investors, but for the purpose of developing first a green energy power system.
MDI
In the original Nègre air engine, one piston compresses air from the atmosphere to mix with the stored compressed air (which will cool drastically as it expands). This mixture drives the second piston, providing the actual engine power. MDI's engine works with constant torque, and the only way to change the torque to the wheels is to use a pulley transmission of constant variation, losing some efficiency. When vehicle is stopped, MDI's engine had to be on and working, losing energy. In 2001-2004 MDI switched to a design similar to that described in Regusci's patents (see below), which date back to 1990.[8] It has been reported in 2008 that Indian car manufacturer Tata was looking at a MDI compressed air engine as an option on its low priced Nano automobiles. [9]. Tata announced in 2009 that the compressed air car was proving difficult to develop due to its low range and problems with low engine temperatures.
Quasiturbine
The Pneumatic Quasiturbine engine is a compressed air pistonless rotary engine using a rhomboidal-shaped rotor whose sides are hinged at the vertices.
The Quasiturbine has demonstrated as a pneumatic engine using stored compressed air [10]
It can also take advantage of the energy amplification possible from using available external heat, such as solar energy.[11]
The Quasiturbine rotates from pressure as low as 0.1 atm (1.47psi).
Since the Quasiturbine is a pure expansion engine, while the Wankel and most other rotary engines are not, it is well-suited as a compressed fluid engine, air engine or air motor.[11]
Regusci
Armando Regusci's version of the air engine couples the transmission system directly to the wheel, and has variable torque from zero to the maximum, enhancing efficiency. Regusci's patents date from 1990.[8][12]
Team Psycho-Active
Psycho-Active is developing a multi-fuel/air-hybrid chassis which is intended to serve as the foundation for a line of automobiles. Claimed performance is 50 hp/litre.[13]
Karts
At least one Kart has been powered by a quasiturbine.[14]
Efficient air engines
 |
 | This article possibly contains original research. (May 2009) |
One could make the compressed air engines much more efficient than they are now (15%)[according to whom?] by for example:
- Using the heat energy from the compressor (ALL energy used to run the compressor is converted to heat due to friction[dubious – discuss]),
- shut down the air after a while ("cutoff"),
- Expand the air in several various stages and heat the air again between the expansions by ordinary air (in a heat exchanger).
Defunct Air Engine Designs
Conger Motor
Milton M. Conger in 1881 patented and supposedly built a motor that ran off compressed air or steam that using a flexible tubing which will form a wedge-shaped or inclined wall or abutment in the rear of the tangential bearing of the wheel, and propel it with greater or less speed according to the pressure of the propelling medium.[15]
See also
References
- ^ Braun, Adolphe: Luftlokomotive in "Photographische Ansichten der Gotthardbahn", Dornach im Elsass, ca. 1875
- ^ Compressed-Air Propulsion
- ^ http://www.aircaraccess.com/images/3stage%201.jpg
- ^ www.engineair.com.au
- ^ www.engineair.com.au
- ^ www.engineair.com.au
- ^ www.abc.net.au/tv/newinventors/txt/s1072065.htm
- ^ a b Armando
- ^ http://jalopnik.com/398180/tata-nano-to-offer-compressed-air-engine-optional-make-electric-cars-look-silly
- ^ Quasiturbine Low RPM High Torque Pressure Driven Turbine for Top Efficiency Power Modulation. Peers reviewed paper - Published in The Proceeding of Turbo Expo 2007 of the IGTI (International Gas Turbine Institute) and ASME (American Society of Mechanical Engineers).Abstract info
- ^ a b Quasiturbine> Type> Pneumatic
- ^ Motor
- ^ Psycho-Active Contenders for the Automotive X-Prize
- ^ APUQ - Association de Promotion des Usages de la Quasiturbine
- ^ http://www.machine-history.com/Conger%20Air%20Powered%20Flex%20Tube%20Motor%201881
