Jump to content

Blytheville Municipal Airport

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Zyxw (talk | contribs) at 08:55, 19 October 2011 (new article). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Blytheville Municipal Airport
Summary
Airport typePublic
OwnerCity of Blytheville
ServesBlytheville, Arkansas
Elevation AMSL256 ft / 78 m
Map
HKA is located in Arkansas
HKA
HKA
Location of airport in Arkansas
Map
Runways
Direction Length Surface
ft m
18/36 4,999 1,524 Asphalt
Statistics (2009)
Aircraft operations41,000
Based aircraft17

Blytheville Municipal Airport (IATA: HKA, ICAO: KHKA, FAA LID: HKA) is a public use airport located three nautical miles (4 mi, 6 km) east of the central business district of Blytheville, in Mississippi County, Arkansas, United States. It is owned by the City of Blytheville.[1]

This airport is included in the FAA's National Plan of Integrated Airport Systems for 2011–2015, which categorized it as a general aviation facility.[2]

Facilities and aircraft

Blytheville Municipal Airport covers an area of 88 acres (36 ha) at an elevation of 256 feet (78 m) above mean sea level. It has one runway designated 18/36 with an asphalt surface measuring 4,999 by 75 feet (1,524 x 23 m).[1]

For the 12-month period ending August 31, 2009, the airport had 41,000 aircraft operations, an average of 112 per day: 95% general aviation, 4% air taxi, and 1% military.At that time there were 17 aircraft based at this airport: 77% single-engine, 12% multi-engine, 6% helicopter, and 6% ultralight.[1]

References

  1. ^ a b c d FAA Airport Form 5010 for HKA PDF. Federal Aviation Administration. Effective 25 August 2011.
  2. ^ "2011–2015 NPIAS Report, Appendix A (PDF, 2.03 MB)" (PDF). 2011–2015 National Plan of Integrated Airport Systems. Federal Aviation Administration. 4 October 2010. {{cite web}}: External link in |work= (help)