Jump to content

Franchi LF-57

From Wikipedia, the free encyclopedia
LF57
Luigi Franchi LF57 Submachine gun.
TypeSubmachine gun
Place of originItaly
Service history
In service1962–present
Used bySee Users
Production history
DesignerLuigi Franchi
ManufacturerFranchi
Produced1956[1] or 1957-c.1980
VariantsLF-62
Specifications
Mass3,17 kg (7 lb)
Length419 mm (16.50 in) butt folded, 686 mm (27 in.) butt extended
Barrel length203 mm (8 in.)

Caliber9×19mm Parabellum
ActionBlowback
Rate of fire500 rounds/min
Muzzle velocity365 m/s (1200 ft/s)
Effective firing range25 m 82 (ft)
Feed system20 or 40-round magazine
SightsIron sights

The Franchi LF-57 is a submachine gun chambered in 9×19mm Parabellum designed and manufactured by the Italian Luigi Franchi.

Development

[edit]

The development of the LF-57 was started by Franchi in 1956; it went into production in 1957. It shares many design features the Beretta Model 12 submachine gun, considered a rival design to the LF-57.

13,500 units of the gun were delivered to the Italian Army, as well as the 13th "Aquileia" Target Acquisition Group (Gr.Ac.O.) of the 3rd Missile Brigade "Aquileia" of Portogruaro.

In 1962 it was supplied to the COMSUBIN of the Italian Navy, but shortly afterwards it was replaced with the Beretta PM 12.[1] Subsequently, the Heckler & Koch MP5 replaced the LF-57 in the Italian Army.

10,000 copies of the weapon were also purchased by the Portuguese Army which used it in the wars in Angola, Guinea-Bissau, Mozambique and the Democratic Republic of Congo in the years immediately following independence from Belgium.

The production of this weapon continued until 1980, with a total of 30,000 examples built for the foreign market, as it was unsuccessful Italy military and law-enforcement markets.

Design

[edit]

LF-57 is mainly constructed of pressed-metal. The LF-57 uses a recessed bolt head similar to the Beretta Model 12's as a method of reducing the weapon's length, although on the LF57 the bolt's mass is carried above the barrel rather than around it. This allows manufacture to be simplified to a degree. Most parts are made of stampings and pressings, and the two sides of the gun are one piece each, joined by a long seam.

Removing certain parts, such as the barrel, is simple since it's held on by one single barrel nut. The tubular butt folds to the right side of the receiver, and the pistol grip is made entirely of steel. The sights are simple fixtures on the top of the barrel.

Users

[edit]

References

[edit]
  • Ian V. Hogg; John S. Weeks (2000). Military Small Arms of the 20th Century. Krause Publications. p. 141. ISBN 9780873418249.
  1. ^ a b Hogg, Weeks (2000)
  2. ^ a b c Debay, Yves (February 1987). "Les armes de l'infanterie italienne". La Gazette des Armes (in French). No. 162. pp. 26–30. Archived from the original on 2018-12-14. Retrieved 2018-12-10.
  3. ^ "WWII weapons in the Anya-Nya". 6 September 2021.
  4. ^ a b c d Jones, Richard D. Jane's Infantry Weapons 2009/2010. Jane's Information Group; 35 edition (January 27, 2009). ISBN 978-0-7106-2869-5.
  5. ^ Sicard, Jacques (November 1982). "Les armes de Kolwezi". La Gazette des armes (in French). No. 111. pp. 25–30. Archived from the original on 2018-10-19. Retrieved 2018-10-18.