Skip to main content
eScholarship
Open Access Publications from the University of California

Scholarly Works (12 results)

  • Article
  • Peer Reviewed
UC Santa Barbara Previously Published Works (2017)
    • Article
    • Peer Reviewed
    UC Irvine Previously Published Works (2024)
    Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with the Fluka Monte Carlo programme.
      Cover page: Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuumCreative Commons 'BY-NC' version 4.0 license
      • Article
      • Peer Reviewed
      UC Irvine Previously Published Works (2024)
      Several processes studied by the ATLAS experiment at the Large Hadron Collider produce low-momentum b-flavored hadrons in the final state. This paper describes the calibration of a dedicated tagging algorithm that identifies b-flavored hadrons outside of hadronic jets by reconstructing the soft secondary vertices originating from their decays. The calibration is based on a proton-proton collision dataset at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 140  fb−1. Scale factors used to correct the algorithm’s performance in simulated events are extracted for the b-tagging efficiency and the mistag rate of the algorithm using a data sample enriched in tt¯ events. Several orthogonal measurement regions are defined, binned as a function of the multiplicities of soft secondary vertices and jets containing a b-flavored hadron in the event. The mistag rate scale factors are estimated separately for events with low and high average numbers of interactions per bunch crossing. The results, which are derived from events with low missing transverse momentum, are successfully validated in a phase space characterized by high missing transverse momentum and therefore are applicable to new physics searches carried out in either phase space regime. © 2024 CERN, for the ATLAS Collaboration 2024 CERN
        Creative Commons 'BY-NC' version 4.0 license
        • Article
        • Peer Reviewed
        UC Irvine Previously Published Works (2024)
        Fiducial and total W± and Z boson cross sections, their ratios and the ratio of top-antitop-quark pair and W-boson fiducial cross sections are measured in proton–proton collisions at a centre-of-mass energy of s=13.6 TeV, corresponding to an integrated luminosity of 29 fb−1 of data collected in 2022 by the ATLAS experiment at the Large Hadron Collider. The measured fiducial cross-section values for W+→ℓ+ν, W−→ℓ−ν¯, and Z→ℓ+ℓ− (ℓ=e or μ) boson productions are 4250±150 pb, 3310±120 pb, and 744±20 pb, respectively, where the uncertainty is the total uncertainty, including that arising from the luminosity of about 2.2%. The measurements are in agreement with Standard-Model predictions calculated at next-to-next-to-leading-order in αs, next-to-next-to-leading logarithmic accuracy and next-to-leading-order electroweak accuracy.
          Cover page: Measurement of vector boson production cross sections and their ratios using pp collisions at s = 13.6 TeV with the ATLAS detectorCreative Commons 'BY-NC' version 4.0 license
          • Article
          • Peer Reviewed
          UC Irvine Previously Published Works (2024)
          This Letter presents results from a combination of searches for Higgs boson pair production using 126-140  fb^{-1} of proton-proton collision data at sqrt[s]=13  TeV recorded with the ATLAS detector. At 95% confidence level (CL), the upper limit on the production rate is 2.9 times the standard model (SM) prediction, with an expected limit of 2.4 assuming no Higgs boson pair production. Constraints on the Higgs boson self-coupling modifier κ_{λ}=λ_{HHH}/λ_{HHH}^{SM}, and the quartic HHVV coupling modifier κ_{2V}=g_{HHVV}/g_{HHVV}^{SM}, are derived individually, fixing the other parameter to its SM value. The observed 95% CL intervals are -1.2<κ_{λ}<7.2 and 0.6<κ_{2V}<1.5, respectively, while the expected intervals are -1.6<κ_{λ}<7.2 and 0.4<κ_{2V}<1.6 in the SM case. Constraints obtained for several interaction parameters within Higgs effective field theory are the strongest to date, offering insights into potential deviations from SM predictions.
            Creative Commons 'BY-NC' version 4.0 license
            • Article
            • Peer Reviewed
            UC Irvine Previously Published Works (2024)
              Creative Commons 'BY-NC' version 4.0 license
              • Article
              • Peer Reviewed
              UC Irvine Previously Published Works (2024)
              Abstract: The identification of top quark decays where the top quark has a large momentum transverse to the beam axis, known as top tagging, is a crucial component in many measurements of Standard Model processes and searches for beyond the Standard Model physics at the Large Hadron Collider. Machine learning techniques have improved the performance of top tagging algorithms, but the size of the systematic uncertainties for all proposed algorithms has not been systematically studied. This paper presents the performance of several machine learning based top tagging algorithms on a dataset constructed from simulated proton-proton collision events measured with the ATLAS detector at √ s = 13 TeV. The systematic uncertainties associated with these algorithms are estimated through an approximate procedure that is not meant to be used in a physics analysis, but is appropriate for the level of precision required for this study. The most performant algorithms are found to have the largest uncertainties, motivating the development of methods to reduce these uncertainties without compromising performance. To enable such efforts in the wider scientific community, the datasets used in this paper are made publicly available.
                Creative Commons 'BY-NC' version 4.0 license
                • Article
                • Peer Reviewed
                UC Irvine Previously Published Works (2024)
                Abstract: This paper presents a measurement of the production cross-section of a Z boson in association with b- or c-jets, in proton–proton collisions at $$\sqrt{s} = 13$$ s = 13 TeV with the ATLAS experiment at the Large Hadron Collider using data corresponding to an integrated luminosity of 140 $$\hbox {fb}^{-1}$$ fb - 1 . Inclusive and differential cross-sections are measured for events containing a Z boson decaying into electrons or muons and produced in association with at least one b-jet, at least one c-jet, or at least two b-jets with transverse momentum $$p_\text {T} > 20$$ p T > 20 GeV and rapidity $$|y| < 2.5$$ | y | < 2.5 . Predictions from several Monte Carlo generators based on next-to-leading-order matrix elements interfaced with a parton-shower simulation, with different choices of flavour schemes for initial-state partons, are compared with the measured cross-sections. The results are also compared with novel predictions, based on infrared and collinear safe jet flavour dressing algorithms. Selected $$Z + \ge 1~c$$ Z + ≥ 1 c -jet observables, optimized for sensitivity to intrinsic-charm, are compared with benchmark models with different intrinsic-charm fractions.
                  Creative Commons 'BY-NC' version 4.0 license
                  • Article
                  • Peer Reviewed
                  UC Irvine Previously Published Works (2024)
                  Abstract: Pixel sensors in 3D technology equip the outer ends of the staves of the Insertable B Layer (IBL), the innermost layer of the ATLAS Pixel Detector, which was installed before the start of LHC Run 2 in 2015. 3D pixel sensors are expected to exhibit more tolerance to radiation damage and are the technology of choice for the innermost layer in the ATLAS tracker upgrade for the HL-LHC programme. While the LHC has delivered an integrated luminosity of  ≃ 235 fb-1 since the start of Run 2, the 3D sensors have received a non-ionising energy deposition corresponding to a fluence of ≃ 8.5 × 1014 1 MeV neutron-equivalent cm-2 averaged over the sensor area. This paper presents results of measurements of the 3D pixel sensors' response during Run 2 and the first two years of Run 3, with predictions of its evolution until the end of Run 3 in 2025. Data are compared with radiation damage simulations, based on detailed maps of the electric field in the Si substrate, at various fluence levels and bias voltage values. These results illustrate the potential of 3D technology for pixel applications in high-radiation environments.
                    Creative Commons 'BY-NC' version 4.0 license
                    • Article
                    • Peer Reviewed
                    UC Irvine Previously Published Works (2024)
                    This paper presents a search for exotic decays of the Higgs boson into a pair of new pseudoscalar particles, H→aa, where one pseudoscalar decays into a b-quark pair and the other decays into a τ-lepton pair, in the mass range 12≤ma≤60  GeV. The analysis uses pp collision data at s=13  TeV collected with the ATLAS detector at the LHC, corresponding to an integrated luminosity of 140  fb−1. No significant excess above the Standard Model (SM) prediction is observed. Assuming the SM Higgs boson production cross section, the search sets upper limits at 95% confidence level on the branching ratio of Higgs bosons decaying into bb¯τ+τ−, B(H→aa→bb¯τ+τ−), between 2.2% and 3.9% depending on the pseudoscalar mass. © 2024 CERN, for the ATLAS Collaboration 2024 CERN
                      Creative Commons 'BY-NC' version 4.0 license
                      Top